Blum lifting gear: how to adjust

Aventos - Blum lifting mechanisms, providing a high level of convenience in the operation of the upper kitchen cabinets. A special hardware device allows you to effortlessly open even the heaviest facades.

These lifts are also distinguished by the fact that freedom of movement and useful space of the kitchen are not constrained by unnecessary structural elements and do not clutter up the place above the head of the hostess. What are the positive qualities of the Blum lifting mechanism, as well as how to easily, quickly and correctly adjust it with your own hands, we will consider further.

The advantages of lifting elements for kitchen cabinets

The Blum mechanisms have such positive qualities:

1. Ease of use. These devices are designed so as not to restrict in any way the freedom of movement of a person working in the kitchen. In the process of preparing the facade, you can leave it open and not worry that it will fall on the head of the owners, because Blum Aventos provides a secure fit.
2. Easy to open and silent during the process. Easy opening plus silent closing of the front doors is achieved through the operation of the integrated BLUMOTION cushioning system.
3. Multifunctionality. Thanks to the SERVO-DRIVE and TIP-ON movement technology, the opening of facades without handles becomes comfortable.
4. Ability to stop the door of the shelf in any position. The power mechanism smoothly working and adjusted to the weight of the facade allows such manipulation to be made regardless of the position of the element.
5. The unity of design of the lower cabinets and upper cabinets. The presence of horizontal gaps determines the appearance of the furniture and in no case should it be cut with vertical “gaps”. When using the Blum Aventos lifting mechanisms, you can find the right position for the appearance of both the upper and lower cabinets.

Subtleties of adjustment of the power mechanism "Aventos HF"

To set up the Aventos ski lift to stop in any position, follow the brief instructions:

1. Insert the special nozzle into the adjustment groove.
2. Rotate the element with a screwdriver (set to minimum mode), watching the position of the slider relative to the adjustment scale, thereby loosening or tightening the mechanism. Perform the action before opening / closing the doors will not stop in any position.
3. Make sure that the slider on both mechanisms supporting the facade is in the same position.
   

How to adjust the hinges and facades?

The procedure for setting up the Blum hoist includes 5 basic steps:

1. Pre-adjustment of two pairs of loops (upper, middle). This will help to establish the facades exactly along the body with the same gaps. Since this is only a preset, twist “more or less”.
2. Then manually adjust the position of the facades so that all the doors are in a strictly parallel position. Note that the latch on the telescopic arm must be perpendicular to the arm itself.
3. After fulfilling the two previous conditions, snap the latch and check whether the facades are level. If not, use an awl to return it to its original state and re-align the doors.
4. Click the mechanism and check the elements for open-close.
5. At the final stage of adjustment, work again with the upper lower hinges, adjusting them until the facades come to the ideal position.

Now that you have read the simple instructions, you know how to adjust the Blum Aventos lifting mechanism to secure the kitchen facades of the cabinets.