The onset of cold weather does not become an obstacle for true lovers of private craft. On the contrary, many fishermen are looking forward to this time. In order to fish it was a pleasure and the process itself turned out to be as productive as possible, you should carefully prepare for it. In the course of fishing, the fisherman uses various gear, lures and feeders. At the right time, they will always be at hand if kept in a special fishing box. Judging by numerous reviews, the availability of such a device is especially important for winter fishing. This is due to the fact that the fishing process is complicated by adverse weather factors. Without a box for winter fishing under the influence of cold, snow and wind gear can be lost. In specialized stores there is a wide range of such products. However, many fishermen go out on the ice with homemade crates. Information on how to make a box for winter fishing with your own hands is contained in the article.
Acquaintance
The box for winter fishing is a special aluminum container insulated with foam plastic with several compartments for tackle and fish. This device is equipped with a functional mount that makes it easy to carry. Most options are equipped with a warm seat and runners.
About product requirements
According to many consumers, it is desirable that the box for winter fishing is spacious enough. In this case, mormyshki and other equipment will be placed in it correctly. Tanks should be equipped with special pockets, departments and compartments. A photo of the box for winter fishing is presented in the article. It is best to give preference to products with low weight. The best option is within 10 kg. Some models are transformer boxes.
The design allows them to transform into suitcases and sleds. Those who want to save money may not purchase a branded product, but make it on their own. How to make a box for winter fishing is described below.
About DIY materials
According to many masters, fishing boxes for winter fishing at home are mainly made of wood and plastic. It is problematic to make steel appliances in a handicraft way, since this will require special equipment. It is much easier to work with wood.
However, each type of tree has a certain thermal conductivity, impact resistance and resistance to bending, which should be considered by a home craftsman. It is undesirable to work with particleboard, since nails will not enter into such material. Also, many craftsmen make homemade products from plexiglass, plywood and sheet metal.
About Tools
Before you begin, you need to prepare a workplace. Since glue and paint and varnish mixtures will be used during manufacture, the table surface needs to be covered. If the master decided to use wood as a material, he can not do without the following tools:
- screwdrivers;
- a hammer;
- pliers;
- rulers;
- nails
- level.
In addition, you need to worry about personal protective equipment. Since you will have to work with a special frost-resistant varnish, a home craftsman will need a respirator.
About plywood product
A fishing box is made in the following stages:
- First of all, you need to make a drawing. It indicates the desired dimensions of the box and its internal cutting.
- Then you need to make several planes that will be used as the sides of the box. For internal partitions, thin bars are needed.
- The next step is to make a wooden frame. To do this, you need more bars. It is desirable that their cross section be 30 × 30 mm.
- After that, the planes are attached to the wooden frame with small self-tapping screws.
- In the internal partitions, several grooves should be cut for fastening to the walls of the box.
To mount the lid on the box, you will need furniture hinges. They are attached to the product with small self-tapping screws. After the fishing box is completely ready and assembled, its surface is carefully processed. Many masters use hot drying oil for this purpose. When the surface of the product is completely dry, a varnish coating is applied to it. This work should be performed repeatedly. Judging by the numerous reviews, the craftsmen put at least three layers on the box. This greatly increases the moisture resistance of the box. Who does not want to work with varnish, can apply paint. As in the case of varnish, the product should be painted in several layers. Such a measure significantly increases the operational resource of a handicraft fishing box. In addition to the traditional long strap attached to the sides, many home craftsmen mount a soft leather seat on the lid. If desired, the materials can be combined. For example, for the manufacture of sides and bottom, sheet duralumin is used, and for the lid - plywood or a board.
Product from the freezer
Judging by the numerous reviews, this option is quite simple to manufacture. For work, you need a freezer, which will be the body of the future fishing box.
The master will need to rid her of the gas pipes. The bottom is made of boards. It is desirable that its thickness be at least 30 mm. Before work, the wood is thoroughly dried, cleaned and painted. To prevent water from getting inside the box, there should be a rubberized layer between the board and the wall. Many home craftsmen use rubber strips from ordinary cameras for this purpose. Thick plywood is suitable for making a roof. Mount the cover with a slight overflow. Then a special sponge is placed on a piece of plywood, which is covered with durable material on top. Tarpaulin is quite suitable for this. This material is attached using a furniture stapler. Hinges are used to connect the cover and housing. Compartments for the inside of the box are made from thin wooden battens and bars. Bolts fasten a wide and durable belt to the case. At the end of the work, the product is painted. It is easy to make a fishing box for winter fishing with your own hands from a bucket or ordinary canister.
What do you need?
Before proceeding with the manufacture of a box for winter fishing, you should prepare the following:
- one large plastic canister;
- two small cans;
- piece of rubber;
- two loops;
- aluminum corner and several latches, rivets and screws.
Working process
It will not be difficult to make a box at home if you adhere to the following sequence of actions:
- First, the top is cut off from the canister.
- An aluminum corner is attached to the trimmed edge with small bolts or rivets. This is necessary so that the design has rigidity and strength.
- A partition is made of plastic.
- The cover can be made of plywood or plastic. During its installation, a small lap should be left. Loops are attached to the plywood sheet. To the top you need to glue the mat. After that, the cover can be connected to the housing.
- Two small cans in this home-made product will serve as pockets. To do this, cut them and attach to the box. Some wizards have small canisters fitted with lids.
- The fishing box will be functional if the master equips it with a wide and durable belt.
Judging by the numerous reviews, such a box has several advantages. It is quite light and roomy. In addition, it is easy to manufacture, the master can do with several tools.
What will experts advise?
Experienced craftsmen recommend making a fishing box according to a previously prepared drawing, which is a necessary element of any engineering and construction tasks. If you have a drawing, the assembly process will be more efficient, and the craftsman can not worry that the design will turn out to be a curve. You can compile it on a computer using special programs for this. Graph paper is also suitable. If it is absent, the school notebook in the box will also work perfectly.