When a new sofa appears in the house, you always want to keep its appearance for as long as possible. But this soft design, like all other furniture, loses its original appearance after some time. If the house has small children, then this will happen much earlier. In order for upholstered furniture to please its beautiful view for a very long time, you need to take care of it in advance.
In this case, the solution may consist in acquiring or sewing a beautiful bedspread on a corner sofa. It is sometimes difficult to buy ready-made textiles, since its parameters do not always correspond to the desired. Therefore, most often, such bedspreads are sewn to order in the studio or by the hostess of the house. Since the corner sofa can have the most non-standard shape, you will have to create a pattern in stages, carefully measuring every corner of it. And here you have to choose what to sew. You can try to make a bedspread from a single piece of fabric, which will exactly mimic the shape of the furniture. But it is best to sew the wraps on the corner sofa for each part separately. So you can avoid endless “slipping” of fabric. A cloak that exactly matches all the parameters of the furniture will fit perfectly on it.
Undoubtedly, stylish bedspreads on a corner sofa look better, but it’s difficult to sew them, and then it’s not easier to wash either. And it’s impossible to make a cover that is suitable for any transformation of the sofa. In this case, instead of the cover, it is desirable to use covers that are sewn on each element of the sofa (on each pillow) separately. Such covers are convenient in that you can sew several sets on one sofa and with their help periodically change the interior of the room. And if one of the covers gets dirty, then washing it is easier than the whole cover.
Bedspreads are made on the corner sofa in accordance with some rules and recommendations. Let's try to get acquainted with them. First you need to decide which product will be sewn. The easiest way, of course, is to make separate wraps for each component of the sofa. And for the integrity of the product, two canvases are connected at an angle of 45 degrees. We measure those parts of the sofa that need to be protected, and we make a pattern with allowance for seam allowances. Then we transfer our sketch directly to the matter and cut out the future product. We sew both canvases (not forgetting to process the edges of the seam), do the hem of the edges of the bedspread on the corner sofa. To prevent the fabric from sliding off the sofa, you can stretch the elastic into the hem. Carefully iron the finished product with an iron and steam off all the seams. If the fabric from which the bedspread was sewn remained, then it is possible to make covers for decorative pillows out of it, which will act as a complement to the overall image of upholstered furniture.
Of course, a blanket with one cloth is good to use if the sofa is not used as a bed at night. If it is laid out every day, a simple blanket can replace a home-made cloak. It can also be used as a blanket.
If you purchased a corner sofa in the kitchen, then the material used for sewing the bedspreads should be as dense and unpretentious as possible. After all, spots (especially greasy) are constant companions of any feast.
In addition to sewing bedspreads, needlewomen can knit an exclusive cloak with their own hands. In this case, you can give free rein to imagination. For such a thing, it is best to use a hook, since the canvases made by him do not have the ability to stretch.