You finally got yourself a plate. You were immediately offered a service in the store to configure and install it, but remembering that you need to save money, you decided to refuse the services of specialists and set up Tricolor TV channels yourself.
The idea, of course, is commendable, deserving of every kind of approval. In the box with the equipment you found the instructions and decided to follow its instructions exactly. Since the antenna is stored in an unassembled box, before you ask yourself how to set up Tricolor TV yourself, you need to assemble it. In the assembly itself there is nothing particularly complicated. The plate does not disassemble, which means you need to assemble the mount and attach the transponder to the bracket. Once you do this, it's time to move on to the second stage - installing the antenna.
You need to find out exactly where your antenna will be oriented. This is not an ordinary television antenna, but a satellite one, and you need to orient it to the satellite. In the manual we read that we need Eutelsat W, which revolves around the Earth at 36 degrees east longitude. Therefore, it is necessary to orient the antenna so that the satellite signal does not shield anything.
Residents of private houses are easier - they can simply put a “plate” on the roof, and then orient the setting by typing. This will not work in the city for the simple reason that the roofs have long been occupied by pigeons and conventional antennas. In addition, you will not be able to guard your plate around the clock, and your revolutionary-minded neighbors will quickly expropriate it. And in this case, you will no longer be interested in how to set up Tricolor TV yourself.
For this reason, the vast majority of owners of satellite dishes prefer to install them on their own balconies. If you don’t have a compass at home and you didn’t go in for tourism and orienteering in your childhood, then the best way out for you would be just to peep at how your neighbor’s equipment was installed. And in the same way, install and orient the plate yourself.
You probably know how to drill walls and screw in screws yourself, so there is no need to paint this process in detail. So you can handle the mount yourself. Just do not tighten all the screws tightly, leave a slight backlash. You will need it to configure the Tricolor TV antenna . How to configure the channels, the instructions say, but for now you need to connect the cable to both the antenna and your TV. This operation also does not require brainstorming, so the process description does not need to be detailed. According to the instructions, we connect the receiver and connect everything to the network.
Now it’s time to learn how to set up Tricolor TV yourself. In the instructions that lie before you, this is not written, so you knowingly began to read this article. We enter the receiver setup mode (this will happen automatically, immediately after you connect it to the network), after which we begin to move along the right arrow until two bands appear at the bottom of the screen. One of them shows the strength of the signal, and the other - its quality. Your task is to ensure that both of these stripes turn green.
Here it’s best to either call someone from the household for help, or recall a school optics course and build a system of mirrors, adjusting them so that you, standing near a plate, can see the TV screen.
Carefully, literally by a millimeter, shifting the plane of the plate in different directions, catch its position in which the stripes turn green. Now you need to fix the antenna in this position, tightening all the mounts well. All. We answered the question about how to set up Tricolor TV yourself. Now you can proceed to register your equipment. You can do this either by phone or on the company's website. Register, tune channels and enjoy the abundance of programs and image quality.