The rear view cameras in the license plate frame are designed to transmit to the monitor located in the cabin, images of the space behind the car. Having this option makes it easier for the driver to park anywhere. Rear-view cameras in the frame of the license plate is a very reliable equipment that ensures the safety of a car moving in reverse. In the evening, such a device is simply indispensable, because it allows the driver to better view the space.
Appointment
Currently, the parking lots and streets of megacities are filled with a huge amount of vehicles, as a result, car owners are faced with a serious problem - how to park? Very often you have to literally squeeze between standing cars, poles and fences. In this case, literally every centimeter of the territory is important. And in order to prevent damage (accidents, scratches, etc.) to the car, the driver needs a device that would assist in difficult situations. One of these “assistants” is the rear view camera in the license plate frame. At the moment, the mentioned equipment is distributed all over the world. Rear-view cameras in the license plate frame are already part of the basic configuration of many modern cars. They can be purchased at almost any car shop. In addition to assisting in parking, a video camera that fixes the space behind the car and is connected to a recording device is able to insure a motorist in case of an accident.
Technical characteristics of rear view cameras
1. The viewing angle affects the coverage of the rear view space. Manufacturers produce rear-view cameras in the license plate frame with an angle of 1000, 1200 and 1700. The latter type of device is capable of capturing a wider view than the rest.
2. Resistance to weather conditions affects the maximum life of the equipment, as temperature changes adversely affect the operation of such products.
3. The resolution of the matrix is 500x582 and 720x576. The higher this indicator, the better the video image on the monitor.
4. The weight of the equipment varies from 150 to 350 grams. However, this parameter is not considered primary, but is secondary.
5. The illumination range can be 3-10 meters, which is very important when parking at night.
How to install a camcorder?
Installation of the camera is carried out on the shelf of the car trunk or on the luggage compartment lid. The signal from the device is fed to the monitor via a four-wire cable, two of which must be connected to the reversing lamp, and two stretch through the entire cabin to the monitor. Wires can be laid from the bottom of the body, for this you need to disassemble the plastic sills, or under the skin of the ceiling, for this you need to remove the rubber seals and lay the cable.
Conclusion
The installation of equipment such as the camera described by us in the frame of a license plate will be primarily useful to motorists who quite often park in new, unfamiliar places or at night (for example, taxi drivers). The camcorder allows you to carefully consider possible obstacles in the parking place to avoid damage to the car. A rear-view camera for a car will be very useful for both novice drivers and experienced car owners, as it is able to provide additional convenience, comfort and driving safety.