The elegance and ergonomics that are inherent in the appearance of the iPhone-4, in the process of dismantling the smartphone are practically not at risk of being violated. Compactness and reasonableness of the structural part of the device provide for a painless disassembly / assembly process of the brand model. But this is rather a theoretical definition. In fact, the situation is somewhat different when the owner of a popular unit, inexperienced in technical matters, decides not to hack the device completely. This article is written exclusively for those who do not know how to disassemble the iPhone-4.
"Apples" made of metal and plastic also deteriorate ...
There are many reasons that sometimes force the user to solve purely professional issues on their own. Often, attempts to correct a detected defect resulting from mechanical damage or due to a different life situation, end in the appearance of new failures. Therefore, do not "bite" the already "bitten" joy. It will be much wiser to study the main points of the question of how to disassemble the iPhone-4 completely, and only after the confidence has strengthened with knowledge, to proceed with the immediate implementation of the plan. However, if the adrenaline of excitement constrains your consciousness, get this idea out of your head and contact a service center for help. Such emotions obviously imply destruction.
How to disassemble iPhone-4: instructions and practical tips
We all know the fairy tale “Porridge from the Ax”: you should not save on buying a special tool, especially since in the future apple-screwdrivers will be useful to you. For safe dismantling you will need:
- Apple pentalobe screwdriver (with star profile);
- tool for unscrewing Phillips screws;
- flat screwdriver;
- plastic “spatula”, pick;
- To disconnect the touchscreen and display, you need a silicone suction cup.
The surface of the table should be flat and clean. As a working substrate, you can use a small piece of linen fabric. Naturally, the chair on which you will sit should not stagger. A calm environment, stable stability of the "working" headset and the lack of trembling in the hands - the key to the success of your company.
Mission number 1. Get to the battery
The first step will help us partially answer the question of how to disassemble the iPhone-4.
- From the bottom of the gadget, unscrew the two fixing apple-screws.
- A shift up - and the back cover is removed.
- At the bottom of the smartphone on the right, near the battery, unscrew the fixing screw of the protective cover of the battery connector.
- Gently pry the terminal and, pulling on the liner, we withdraw our battery.
Mission number 2. Turn off the optical equipment
- First of all, you need to remove the SIM tray - a clip to help you.
- We unscrew the two horizontally located bolts above the contact pad of the battery connector and, carefully prying off with a spatula, disconnect it from the system board.
- Move aside (to the right) the detached train. Under it, at the bottom, near the side of the hull, you will see a screw - we twist it.
- The upper part, near the camera, is covered with a plate, which is fixed with 5 bolts. Unscrew everything and then dismantle the shield.
- Finally, our goal is the camera: disconnect the connector and carefully remove the optical device.
Mission No. 3. Command Center
The most important task: to dismantle the system board. By the way, if we put the question a little differently: “How to disassemble iPhone-4 S”, then the difference in answer will be noticeable only in a couple of additionally embedded bolts and a somewhat simplified dismantling scheme, and, of course, in the letter S. The process is identical !
- We snap off all the cables located at the top of the phone, there are only five of them.
- Now you have to unscrew the fixing screws on the system board. In total, the fourth iPhone device has 4 pieces, and the follower of the S-series motherboard is fixed with 6 screws.
- The location of the bolts: the upper part of the case, near the On / Off button - 1, another one nearby on the left, the middle of the system board and the left end edge are the other two.
- We take out the "heart" of the iPhone from the case. Do not forget: do everything with a plastic spatula or pick! Nails, knives and other improvised means are simply unacceptable.
Mission No. 4. Total Disarmament
So we came to the final part of the review-instructions, answering the question of how to disassemble iPhone-4, with clear recommendations.
- At the bottom of the smartphone, on the right, unscrew the screw that holds the polyphonic module. Dismantle it.
- Now you have to unscrew the 3 bolts at the top, at the audio jack, one of which is the internal-end.
- Remove all hinged elements of the device: speaker, coaxial cable, vibration motor, etc.
- At the bottom, unscrew the two bolts that secure the bottom cable.
- Release the microphone from the groove (lower right side of the case, inside).
- Disconnect the flex cable for the Home button.
- Remove the system connector.
- Unscrew all screws around the perimeter of the inside of the housing. It should be noted that the side bolts do not need to be completely removed - just loosen them.
- Carefully separate the chassis frame from the display module. And you should start from the bottom of the smartphone, since the top of the device is equipped with screen cables.
Congratulations - the answer to the question: "How to disassemble iPhone-4" is received!
Finally. About the Chinese brothers we put in a word
Today you can find an incredible number of various fakes in the form of copies of iPhones. Supernova iPhone-5S and no less popular 4 and 4S with pirate signs flooded the Russian markets with its cheap advantage. Therefore, do not be surprised if the Apple logo flaunts on your device, and the back cover strives to fall off all by itself. Even in the case when the case is not separable, and visually there is no hint of fake, it is worth resorting to the elementary method of checking for originality: look inside the gadget. Counterfeit does not pass this test. Based on the foregoing, it may happen that you need a different kind of instruction: how to disassemble the Chinese iPhone-4. Nevertheless, the main principle of dismantling remains the same: careful actions, utmost care and confidence, backed up by knowledge. However, there is no reason for concern if you purchased a smartphone in the store.