For the average user, the process of setting up the router seems to be something scary and impossible. Very rarely, but it happens that the parameters get confused, and then you have to try to restore them manually. In order to log into the system, 192.168.10.1 to configure the router, you must enter in the address bar of the browser.
Causes of router settings failure
Many people mistakenly believe that if the settings have flown, then the problem is in the router. However, if the router is working properly, all the icons are on, and there is no suspicious smell of burnt plastic, then you should not look for the cause of the breakdown in it. As a rule, failures occur due to violations in the settings of the network card and computer.
Most misunderstandings in the operation of computer equipment are caused by “advanced” users who believe that they are a little versed in what they are doing. And then a matter of chance, idle curiosity or the desire to do the “best” can reset the settings to factory settings. Even a simple accidental pressing of the reset button on the device’s case can lead to data loss. It is better to find and remember the location in order to avoid repeated incidents in the future.
Login to Settings
So, if a reset has already occurred or a new router has been purchased, you must configure them again yourself. This is nothing complicated, and after reading this article, even the slowest beginner can figure it out.
The first step to take is to check the connection. The network Internet cable must be connected to the router, like all computers. When verification of this is completed, you need to go to a web browser on your computer. The browser can be any of the available ones, Opera, Chrome, and others.
In the address bar of the browser, you must enter "192.168.10.1" without quotation marks and press the Enter key. The web page should display windows for entering the login and password.
As a rule, the IP address for entering 192.168.0.1 (router settings) is standard. Sometimes there are exceptions, it depends on the model of the router. The manufacturer on the back of the device or in the instructions must indicate an alternative address for entry.
If everything went according to your plan and a window for entering data was displayed, you must enter them. Usually for login use login, 12345 or admin (192.168.10.1 is not the only address at which similar logins can act - they include everything provided for the settings of routers). The password can also be similar standard words accepted for such combinations. It may turn out to be both password and 12345, and admin / admin is often found among login / password combinations.
Setting a new password for the router
After entering the router settings, setting a password is the first necessary action. It is done in the "Settings" or "Change Password" tab.
When setting a new password for a private or public network, it is recommended to remember security and use the most complex code. It is best to use a set of letters and numbers of at least twelve characters.
In order not to forget the password, it is best to come up with a short phrase that will be easy to remember. Often, guests visiting a house during a friendly visit ask for a password from Wi-Fi. This should be remembered, coming up with an unusual set of words for entry.
Standard configuration methods at 192.168.10.1
Prescribing settings in modern routers is a rare need, usually this happens automatically and does not cause any problems for new users. Also, almost every router has a quick setup option, which is always convenient to use. In this tab you only need to select the network name and set a password, select the type of connection. For most, this will be a dynamic IP, which is denoted by the acronym DHCP. There may be other options, they find out by calling the operator of the Internet company.
When information from the provider is received, for reliability, you can restart the device or computer, then all the information received will be updated. However, before exiting, do not forget to save the settings in the browser by clicking on the "Save" button. This will save you from unnecessary torment with re-filling information.
What does 192.168.10.1 mean?
A set of numbers with dots seems to ordinary users something strange and incomprehensible. In fact, the IP address is written in this form - the unique network address of a node in the network using the TCP / IP protocol.
Each network with Internet access has its own or dynamic IP address provided by the Internet provider. But there are several IP addresses that cannot be used for these purposes, but are intended for intranet, local use. In another way, such networks are called private. The list of addresses for internal use is predefined by the administrator or set by default.
Common problems
Sometimes you can’t configure the router. Various circumstances may prevent this, but the most common of them are: the login page in the browser does not appear, or after all the settings, the Wi-Fi still does not come out.
If you can’t log in, rebooting the router helps in 99% of cases. This seems like a completely optional condition and useless action, however a simple reboot can often help.
The same thing needs to be done in the absence of a Wi-Fi signal, you need to find the button to reboot on the equipment, turn off the device for a couple of minutes, and then turn it on again. When rebooting, it is recommended to disconnect and reconnect all cables in order to avoid poor connection.