In the kitchen, the hostesses spend a significant part of the time. 70 percent of it they work near the sink. Therefore, it must be convenient and reliable. What model is better to choose so that it is beautiful, comfortable, lasts a long time? What sizes of corner sinks for the kitchen are suitable for a small room?
Requirements
The aesthetics of the sink is very important to create a good mood for the hostess. Who can create a tasty dish near the peeling old sink?
It follows that the sink must be strong and reliable, not to respond to exposure to hot water, chemicals. Caring for her should be easy.
It is desirable that the sink contains a lot of dishes, and at the same time does not take up much space. Combining these mutually exclusive requirements is not easy. It is for this that a corner sink was invented.
What to consider
In addition to the above requirements, it should naturally fit into the interior. The dimensions of corner sinks for the kitchen largely depend on this. After all, various options for combining devices are possible. Before buying, decide what additional elements will be present: for example, a filter or a waste grinder, which is equipped with an angular sink for the kitchen. Dimensions also depend on the location of the mixer. If it is not placed very tight against the wall, then detergents can be placed in the vacated space.
They are determined with the presence of additional bowls (for rinsing, defrosting food) and drying for dishes - spaces where you can put washed items so that water can be removed from them.
Corner sinks
Usually they are used for placement in small kitchens. After all, there every square centimeter of area matters. But even in a large room with their help you can solve some problems, for example, fill an empty corner.
It will help to imagine how exactly any corner sink for the kitchen saves space, photo. Its dimensions are dictated by the presence of free space. Often they are designed so that the sink is in the corner. On both sides of it are placed surfaces on which you can put both dirty and clean dishes. In this case, there may be more space than with the usual location of the sink.
A slice at the corner near the bowl will make it easy to approach it.
The area under the sink is used to store various equipment such as a broom or bin.
When choosing a corner sink, pay attention to:
- Sizes of corner sinks for the kitchen.
- Shape, bowl depth.
- Material.
Of great importance for convenient operation is the depth of the bowl. Sufficient depth experts consider 16-20 cm.
Sizes of small sinks
Choosing the sizes of corner sinks for the kitchen and considering the possibility of their installation, take into account the presence of nearby points of vanishing into the sewer and water supply. It may turn out that the sink is deeper easier to attach to the sewer. After all, the distance from it to the sink will be less than that of a shallow one.
For a small cramped room, a corner sink with one bowl with a diameter of 40 cm is suitable. You can find small ones with two sections. Bowls can be near or at an angle.
If the house has a dishwasher, then a large sink is not needed there. But just where to put it in a small kitchen?
The form
A variety of forms of modern sinks can amaze any housewife. Therefore, do not rush to buy the first one. Usually bowls are rectangular, square, round. The latter often turn out to be more capacious in comparison with square ones of the same radius. There are oval and even triangular. When choosing, see which shape more closely matches the style of your kitchen furniture.
The shape of the sink itself depends on the number of bowls. Usually in the presence of three containers a small defrosting bowl is located between large ones. Such sinks are appropriate in large kitchens. They give complete freedom to the hostess. But the price of such sinks is higher.
For small kitchens, a round bowl is good. She will fit perfectly into the corner. If the sink has 2 bowls, then an interesting option would be to connect a rectangular and triangular or round with an oval. A sink where there is a large and a small bowl is called one and a half. Now you can find options with three very small containers of various shapes.
A siphon and a pipe to drain the water must be brought to each bowl. The more there are, the less space will remain under the sink.
Types of sinks
Overheads are convenient in that they are simply worn on an existing cabinet, which does not require much effort and expense. What should be more: a cupboard or a corner sink for the kitchen? The dimensions of the cabinet should correspond to the size of the sink. Its edges usually overlap the junction, but it sits tightly. Standard sizes for the cabinet: width 50 or 60 cm, length 50, 60, 80 cm.
Mortise is more difficult to install. To do this, you need the appropriate tool and certain skills. All cuts and joints are carefully sealed. Mortise sinks are installed flush with the countertop. This helps to keep the workplace clean. They look beautiful, so they are very popular.
A table sink is installed using brackets in stone countertops. Its vertical walls form one plane with sections of the sink. You won’t be able to do this yourself. Do not mount the sink in a wood-like material. After all, water will fall into the place of the insert. This will lead to rapid swelling and delamination of the countertops.
Often install corner cabinets under the sink for the kitchen. The dimensions of the sink must be at least 5 cm less than the width of the cabinet. This is due to the fact that it should not be located very close to the wall. There are recommendations for the distance from the front edge of the countertop to the bowl. It is advisable that it be located no less than 5 cm so that the spray does not fly to the mistress.
But will such a sink for the kitchen be built into a corner cabinet? The dimensions of a small sink are inversely proportional to its depth.
When installing the corner structure, you first need to buy a sink, then select the countertop and furniture.
Material
Stainless steel sinks are very practical. There is no need to be afraid that the enamel will break off and a dark spot will appear, as is the case with enameled ones. They have an attractive appearance. Drying usually has a ribbed surface so that the water does not linger under the dishes and flows into the sink. In addition, it is designed so that water does not flow over the edges. A decorative plug made of the same material is usually included with a stainless steel sink. It allows you to close unnecessary holes, if any. Indeed, sometimes taps go straight out of the wall without going through the sink.
Depending on the location of the crane, the hole for it can be on the right, left side or in the center of the structure. This expands the possibilities of its connection to the finished water supply.
But they also have disadvantages. First of all, this is a strong noise made by water when it gets to the bottom. But we learned how to deal with it. Use a stainless steel thicker. A soft sound absorber pad is attached to the bottom on the back side.
Of course, the quality of the material can be different. Usually this is type 18/10 steel. This is reflected primarily in the price. And sometimes it turns out that this is not a stainless steel at all. In order not to be deceived, they use a simple method. Apply a magnet to the sink. If he pester, then this is not a real stainless steel.
Ceramic
The advantage of sanitary porcelain sinks is their appearance and scratch resistance. They are not afraid of hot water. Glaze coating, often multi-colored, attracts the buyer. He forgets that such sinks are quite fragile. A violation of the integrity of the glaze will lead to their darkening. Therefore, it is better to install a ceramic granite sink. She is much more reliable.
Composite
They are created from stone chips by adding acrylic resin to it. These are corian and silacryl. It turns out strong and beautiful products of various colors, which are not afraid of any mechanical stress, no hot water, no chemicals.
The sound of water is absorbed by the surface of the sink. It is from this material that small corner sinks for the kitchen are often created. Their sizes are small, and the price is high due to the cost of the material.