The small truck GAZelle managed to become a true legend of the domestic auto industry, despite its relatively small age. It was the first successful small-tonnage machine, which earned universal recognition in many CIS countries, where it is still actively used. In Russia, this is the best-selling small vehicle, which has no equal in value. Still - the price of GAZelle spare parts is 2 times cheaper and more affordable than, for example, Ford Transit. And sooner or later, some kind of spare part on it will require replacement. Springs are no exception.
Any spring tends to collapse (bend under the pressure of gravity). At the same time, the machine begins to sag, and its carrying capacity is significantly reduced. Therefore, the springs on the GAZelle need to be replaced. But our drivers found another way out - to rent a spring. At the same time, it resumes all its operational properties, and it can be further “spoiled”. Of course, there are cases when a metal simply bursts under pressure (most often due to a large overload). And you can’t do without buying a new spare part, since GAZelle cannot ride on shock absorbers alone, much less carry goods. And in order not to often roll and change it, there is an opportunity to strengthen the springs. GAZelle allows such reinforcement exclusively on the rear axle, thanks to the addition of additional sheets.
But do not get too carried away - everything should be in moderation. After all, if you add 10 sheets to the bridge, the GAZelle loading capacity will not increase from this. The load on the engine, gearbox and the frame itself, which likes to burst with overloads of 2.5-3 tons, will increase. When transporting excessive weight, it is especially not worth running into pits and bumps, as this can entail unforeseen consequences. 1,500 kilograms - that’s the norm that GAZelle should carry. And for large loads there is GAZ Valdai.
GAZelle springs are very sensitive to pits, since both the front and rear are interconnected. To save money, you can put worn rear springs on the front axle, and buy new ones in their place.
If you strengthen the springs on the GAZelle, then its carrying capacity will increase to two tons. The addition of each pair of sheets increases the carrying capacity by 200 kilograms. Most often, springs are reinforced on elongated versions of GAZELLES (body length from 4 and more meters). Such tuning increases the reliability and service life of the car chassis at full load. On four-meter cars, up to three additional sheets are installed, which in total amounts to 8 pieces. If desired, it is also possible to install sheets on the front axle, but it does not play a significant role, but only gives the machine rigidity. In general, the reinforcement of the spring on the GAZelle gives it greater stability and maneuverability when driving.
Many drivers, when strengthening the springs, forget that the maximum gazelle load capacity is, as mentioned above, no more than 1,500 kilograms (and this is with a tilt body). If you load 2-3 tons a day into it, soon you will need to replace the rear axle and even overhaul the engine, which, by the way, is also designed for 1.5 tons.