In everyday life, situations often arise when the repair of chairs is required. Do it yourself repair is much cheaper than contacting a master. It is necessary to find out the cause of the breakdown and select the right tool. Many are interested in how to glue a wooden chair. It is worth considering in more detail the materials necessary for furniture repair. Wooden chairs with a soft seat require an approach different from products made entirely of wood. Consider how to restore this furniture yourself.
Causes of breakdowns
Before you look for how to glue a wooden chair, you need to understand what caused the breakdown. This type of furniture consists of many parts that are glued. Over time, the joints stick up. It happens that the legs move away from the harness. Usually they are attached using spikes.
Some products have factory defects. A man sits on a chair with wooden legs and falls, as one of the legs falls off. Do not think that the furniture is no longer suitable for use and its place in a landfill. Damage to this type can be easily repaired with one's own hands, without spending a lot of money on repairs.
How to understand that a chair will break soon?
It is worth listening to the signals that furniture gives to its owners. If the chairs creak or there is a crash when they sit on them, then there is a high probability of an early breakdown. If the furniture serves for a long time, then you can notice that it is glued at the joints of the parts.
If all the crossbars of the product are loosened, then the chair should be disassembled as a whole. In the course of work, it will be clear whether it is possible to glue individual parts.
What glue to use for repair work?
If the wooden chair is broken, then the best carpentry glue is recommended for repair. Nowadays, the most popular are:
- Kleiberite.
- The "moment" is carpentry.
- "Trebond."
Professional joiners put forward the following requirements for glue:
- It must be resistant to sunlight.
- Universal to use.
- The glue should be strong.
- It is recommended to use moisture resistant glue.
- There should be no sticky residue on the surface.
- Should not be toxic.
If you ask a professional craftsman how to glue a wooden chair, he will probably recommend using epoxy glue. It is best suited for wood products. Use of PVA glue is allowed. Some apply a two-component composition.
Materials required for work
To work, you will need:
- Hammer, suitable with rubber tip.
- Fine grit sandpaper.
- Glue.
- Clamp and knife.
- Chisels.
Before starting work, you need to disassemble the chair, clean it from dirt and old glue. The new one should be applied carefully, it is better to make a thin layer. To make the gluing especially strong, it is worth using a clamp or a press, which is at home.
How can a leg be repaired?
When people are interested in how to glue a wooden chair, they often involve repairing the legs. This part is easily installed in place, it is important to choose the right tool. Follow the step-by-step instructions:
- The loose leg must be removed from the socket. It is necessary to remove the old layer of glue from the surface. If it is firmly stuck to the leg, then you can try to steam it using a boiling kettle.
- If the old adhesive is a thin layer, it can be removed with sandpaper.
- It is necessary to apply a layer of fresh glue on the surface of the legs and install it in the nest. For a better grip, you can tap with a hammer on top. It is important to use a rubber nozzle on the hammer.
- If the glue has leaked onto the visible part of the leg, it must be removed with a damp cloth.
- Before using the furniture, make sure that the glue is completely dry. To do this, wait 24 hours.
Features of PVA Glue
This type withstands temperature extremes. This glue is absolutely non-toxic. The advantage of PVA is its shelf life, it is not limited. Even a beginner in the carpentry can take advantage of it, since there will be no traces and stains from it on the surface. It is important to degrease the wood before applying PVA. Press the gluing place with the press. Complete drying of the surface is achieved in a day.
Casein glue difference
It differs from its counterparts in increased strength. Glue can affect the color of wood and change it. Sold in the form of a white powder, which must be diluted in water. Stir the solution for about 40 minutes. It turns out a composition that is resistant to temperature extremes.
Features of epoxy adhesive
It differs in durability of fastening. The product is universal. They can glue any part of a wooden chair. This type of glue perfectly levels the surface and dries quickly.
Why is BF glue good?
Experienced craftsmen often buy BF glue for repairing wooden products. In particular, they are good at repairing broken chairs. BF has a set of characteristics that attract buyers. After bonding, fungus and mold do not form on the surface of the product. The composition is characterized by increased moisture resistance, as well as fire resistance. The glue is not even exposed to gasoline.
What glue can withstand heavy loads?
If the chair is subjected to heavy loads, then it is better to repair it with the help of a syndicon compound. This type of glue has high bonding strength. It has increased moisture resistance, as well as resistance to chemicals.
Nuances when using synthetic glue
This product is in demand as it is easy to apply. To do this, it is not necessary to completely clean the surface. Differs from others in the increased frost resistance.
Features of wood glue
It is considered one of the most durable compounds that can be used on wood. Joiner glue is resistant to changes in room temperature. When preparing the solution, it is important to maintain the specified proportions, especially at the stage of adding cold water.
Conclusion
So, we examined how to glue a wooden chair with your own hands. As you can see, there are many means to restore such furniture. Everyone chooses their option based on the budget and characteristics.