Today, many subscribers of wired and wireless high-speed Internet connections, which include the types of LAN, ADSL, 3G, and Wi-FI connections, use a router as a distribution device. After all, it is very convenient, agree! Just put this device in, set it up in a few taps (and often it is done by the specialists of the Internet provider) - and give out one Internet connection to any number of devices you want, especially if you use a wireless router.
In the latter case, wherever you are within the apartment, provided that the Wi-Fi signal is well transmitted, there is always Internet access. It happens that such a connection option is offered by service companies and representatives of providers when a client reports that he wants to have access to the World Wide Web from several computers, which happens very often. At the same time, many customers, before problems arise, have a very distant idea of what this "box from which the Internet comes" is.
But sometimes there comes a time when you need to configure the router. Most often, the client prefers not to understand on his own, but to call a specialist competent in such matters. But sometimes this is not possible and you have to understand the basics of network technology yourself.
The purpose of this article is to help you resolve the issue of how to find out the IP router. Also give some, albeit very superficial, understanding of NAT technology (network address translation). And how to find out the external IP router, it’s not even a question - just go to the 2ip.ru website and see the dynamic address allocated by your provider for your device. But let's get down to the main topic of the article.
Perhaps the settings on the router are lost, you need to "forward the port", change the routing settings or the provider's servers, connect some function or install fresh firmware on the device. There are a lot of options for the need to access this device. In these cases, you will certainly have a question, how to find out the IP router.
Most often, by default, this is the starting address of the range of IP addresses allocated for local networks (192.168.0.1, 172.0.0.1, 172.0.1.1). But sometimes it happens that the IP address for the router was given non-standard. In such cases, the following must be done. Press the "Start" button, select "Run" from the whole variety, type the cmd command in the window that opens. The console opens. We type ipconfig / all. The system gives you all the available information about network interfaces. Here's how to find out the IP router.
There is also an alternative team. It allows you to answer the question of how to find out the IP router by displaying your routing table - route PRINT. If you use a device of a typical Russian provider to access the Internet, then the VPN or PPPOE connection is established on the router, and the Internet is distributed to the local network.
Computers of all shapes and sizes, including laptops and tablets, are given IP addresses of a certain range of the local subnet. A router in this system, of course, is a gateway. It is his IP address that will be displayed using the ipconfig / all command. Then we type the IP address of the router on the command line, and we are presented with a window for entering credentials to enter the router.
If the default settings were set, then the login (account name) and password can be found in the documentation for the device. It may happen that for some reason you do not know the password for the device. Attention! Before resetting, you should make sure that all the data for authorization on the provider's server is accessible (VPN gateway or PPPOE, DNS servers, login and password). Then the easiest way is to reset the settings. To do this, disconnect the router from the network and hold down the Reset button (usually located on the bottom of the device) for a while.
The router port lights will light up and go out at the same time. After this operation, wait until the router loads the firmware with the new settings (the light comes on) and connect it to the network, update the network interface of the computer where you want to access the device’s administrative panel in the console using the ipconfig / renew command.
Thus, the network interface will receive a new IP address and routing table. After that, we go to the router through the browser line and see the authorization window. We drive into it the data provided by default for your model, and proceed with the setup. So, you figured out how to find out the IP router.