The inflatable boat "Frigate 280" is made in St. Petersburg. It is characterized by a U-shaped case with a glued rigid transom into which a small motor with a capacity of up to 5 liters can be installed. from.
The boat "Frigate 280" has undergone modernization and is now available in models 280 E and 280 E mini. It is worth considering each of them in more detail to make the right choice.
Description of the 280E rubber boat model hull
The case of the Frigate 280 E model is divided into two compartments independent of each other. The cylinders are made in a rounded shape, contributing to the proper trim when using the outboard motor and a slight increase in the area of the cockpit (the interior of the vessel for the helmsman and passengers). For cylinders, a five-layer PVC material is used - a product manufactured by the German concern Mehler Texnologies, reinforced, resistant to salt water, oil and ultraviolet rays.
Welding of seams is carried out by hot air and is strengthened by additional PVC overlays. For many, this technology is wariness. But this process takes place automatically and there is practically no marriage, unlike the use of rubber glue, after drying of which the seams begin to diverge.
Options model "Frigate 280 E"
The swimming equipment in the configuration has a hard floor made in the form of a book of four sections. The surface of the floor is non-slip, so you can calmly rise and stand up to its full height. This model of boat is preferred by lovers of fishing on a spinning rod, as it is more convenient for them to cast in a standing position.
"Frigate 280 E" is found in two versions. One - with fixed banks (seats), which are inserted into glued fasteners; the other with seats mounted in grommet strips. The second option is more convenient, since the extra seat can be removed even with the product inflated.
Model 280 E comes with oar with articulated oars. Using the adjusting clamp, you can change their position. Instead of the glued carrying handles present in most models, the Frigate boat is equipped with special cutouts located in the transom and used for the same purpose.
Be sure to include oars - 2 pieces, a hard seat - 2 pcs., A slan book (otherwise - bottom flooring). Additionally, a repair kit, a pump and an instruction manual can be attached to the boat.
Weight and size
The weight of the fully equipped boat "Frigate 280 E" is 24 kg. The product is packaged in two bags, it is quite convenient to carry in your hands and is easy to place in the trunk of a car.
The size of the model 280 E is sufficient for the free location of two people, but the maximum load capacity of 240 kg allows you to transport four. The dimensions of the rubber boat are 280 cm in length, 128 cm in width and 34 cm in height.
With these parameters, the installation of an outboard motor is allowed, the power of which is not more than 5 liters. with. that allows you to comfortably and quickly move along rivers and lakes. Outboard motor is not included in the standard package.
Model 280 E mini: description
The PVC boat "Frigate 280 E mini" was developed recently, in 2015 the model is lightweight and reliable in operation, was invented for children who also love to be on the water and do not want to be inferior to adults.
The Frigate 280 E mini uses the same cylinder manufacturing technology as the 280 E. The hull consists of durable Mehler reinforced PVC fabrics. The use of this type of material is due to its safety, increased wear resistance and a long service life.
In the manufacture of a children's inflatable boat, a bright color, for example red, is used. This allows you to observe children from a great distance, keeping them constantly in sight. The seams are also welded using hot air technology, which guarantees increased reliability and durability of the swimming tool.
Options, weight and size
Inside the body, cast holders are used on the sides, used for rigid fixation of the seats. The model 280 E mini is equipped with an anchor eye that is attached to the front of the boat, and guardrails located along its sides.
The children's rubber boat "Frigate 280 E mini" is also equipped with two oars, two hard seats, a slan book, a pump, a carrying bag and instructions.
The weight of this model is small, only 13 kg. "Frigate 280 E mini" has the following dimensions: length - 204 cm, width - 104 cm, side height - 28 cm. Capacity - 2 people; maximum weight load - 180 kg. In this model, you can also use an outboard motor with a capacity of not more than 0.7 liters. from. The motor is not included in the package.
Total
Inflatable boats "Frigate 280 E" and 280 E mini are suitable for any weather, as they are made of durable German PVC material. Model 280 E is suitable for fishing and hunting, in it you can calmly stand upright. Model 280 E mini was created specifically for children and does not imply its use by an adult, although it can withstand two adults by weight. It is very convenient for teaching children how to drive an outboard motor.