Any angler should know how to tie a fishing line to a spinning leash. This is one of the most important factors for getting a good catch. This is due to the fact that when immersed in water, the fishing line loses about a fifth of its strength. And if the ligament node is unsuccessful, the moment of breakage of the mechanism increases by another quarter. Consider the features of this site and how to create it. There are many such methods: some of them are elementary, while others require some skill.
Features
How to tie a fishing line to a spinning leash correctly? It turns out that the best option is a leash that is attached to the fishing line in such a way as to provide a reliable bite. It is as important as equipping the bait, reel, fishing rod.
The bottom line is that regardless of the strength of the rod, the quality of the bait and the excellent reel, a poorly selected leash with an improperly tied knot entails a break in the connection of the main fishing line. This suggests that any catch can be forgotten in a similar situation. The only feature is that certain knots can be knitted directly in the “field conditions”.
It should be noted that hooks to leashes are much more difficult to tie. The time spent can be worth a precious catch or skipping the appearance of a bite. The formality associated with how to tie the leash to the main fishing line on a spinning rod is an important thing, if not paramount, when organizing decent fishing.
Mounting Options
There are many ways to fix the devices in question, which will allow you to securely fix the tackle, avoiding its breakage. Simple and complex versions are available, but they are all quite effective. The main thing is to develop practical skills in a particular method.
How to tie a fishing line to a spinning leash (basic methods):
- A simple and frequently used method is loop to loop. The simplicity of the design does not indicate its utmost reliability.
- Dressing is done in a few simple steps.
- First, a pair of ordinary loops is knitted from the main and additional fishing lines with elongated dimensions.
- Further, the ends of the fishing line with a loop are folded in half, after which they turn 2-3 times around its axis.
- Initially, a fishing line loop is threaded through a ring that forms at the beginning of the process. After that, the system is simply delayed.
- The hinges of the leash and fishing line are fixed together, the mount is ready.
How to tie a fishing line to a spinning leash: an improved way
Another well-known fishing node of a modernized type is used. It fits in the loop-to-loop method, simply and quickly. It can be organized directly on the spot, without special skills and adaptations. This node is considered a universal type.
The stages of its creation are in the following stages:
- The main fishing line and leash are attached to each other.
- The leash is wrapped around part of the fishing line, after which its end is pulled up.
- The same edge is threaded into the resulting loop without tightening.
- The rest of the leash once again wraps around the loop.
- The node is finally tightened.
- A similar operation is carried out with the edge of the main forest.
"Nail"
You can tie the leash to the main spinning line in another way called “Nail”. It is not as simple as the options considered, but it is characterized by high strength and reliability.
Stages of work:
- A stop knot is made on the main fishing line.
- The main fishing line and the leash are parallel to each other.
- The line of the leash is threaded under the main counterpart.
- One revolution is carried out around the main forest.
- An oblong strong object such as a nail or handle is threaded into the resulting loop.
- Around this fixture is a few more skeins.
- The edge of the leash is pulled through the object, after which the knot is pulled. This manipulation requires care and accuracy so that tangled and disheveled areas do not appear.
- The rest of the leash is simply cut off.
"Eight"
How to tie a leash to the main fishing line on a spinning rod using this method, we will consider further. This method is simple and elementary. At the same time, the design has established itself as a reliable and fairly durable unit. Stages of creation:
- The leash and the main fishing line are applied parallel to each other.
- A loop is made in the form of a figure eight (Flemish analogue).
- The knot is tightened tightly.
Swivels
Next, we will study another way, how to tie a leash to a spinning line? For fishermen, it is called an "improved clinch." This system is durable, its strength reaches 95 percent. This design can withstand easily catch a mass of 10 or more kilograms. In this case, the main thing is to observe the identical parameters of the main fishing line and leash.
Manufacturing process:
- The liberated edge of the forest stretches through the swivel.
- The same end is wrapped around the woods several times (up to five turns). The node is not delayed.
- Further, the end is threaded through the hole, which was formed in the area of ​​the swivel ring.
- The pre-wetted prepared unit is tightened tightly.
It is worth noting that this design is not recommended for use not with ordinary, but with braided fishing line.
Carbine
What is the best way to tie a leash to a spinning line? There is no definite answer to this question, however, many fishermen use a system with a swivel and a carbine. The swivel assembly is made as follows:
- A swivel hangs in.
- Parts of the leash fold in half.
- The remainder also doubles.
- The fishing line is fixed 2-3 cm from bending mechanically (manually).
- At least a couple of revolutions around the main fishing line.
- The double edge of the scaffold is threaded into the loop obtained.
- The nodal part is wetted and tightened.
- All residues in the region of 0.5 centimeter are cut off.
It should be noted that the resulting assembly relates to a fixed-type design.
Integrated Mount
How to properly tie the leash to the main fishing line on a spinning rod using a snap hook and swivel, we will consider further:
- A sinker is attached to the edge of the main fishing line.
- The leash is fixed 200-300 millimeters above the weight. Here it is necessary to note one nuance: the retractable leash should be strictly perpendicular to the main fishing line.
- If the leash and the forest are connected directly, the fact that there is an increased chance of entangling gear should be considered. The simultaneous use of not only a swivel, but also a carbine will help solve this problem.
- With such a system, a swivel-carabiner system is attached to the main fishing line, and then a leash.
Attaching Multiple Leashes
How to tie a leash to the main fishing line on a spinning rod (photo above) when using several elements. To do this, you need to correctly attach the parts (no more than three pieces are used). Proper placement will allow you to not confuse the leashes among themselves and not tear them from the main fishing line. In this case, a “snake” knot is used.
It is created in the following way:
- The main part of the line is parallel to the leash counterpart.
- A few turns are carried out by a leash around the main fishing line.
- Similar manipulations are carried out with the opposite end of the main forest.
- The resulting segments are threaded through the loop, which was formed as a result of creation.
- The knot is neatly tightened.
As a result, you should get one fixed leash and a pair of freely sticking ends. If you lengthen them, they really add additional leashes. To strengthen the design, you can use swivels and carbines, and already attach leashes to them.
The overall configuration largely depends on the needs of using gear and imagination. When creating a design, the main thing is not to go too far. Do not make such a device that will scare away fish. If there is no particular need for additional leashes, it is best to simply trim the protruding ends.
Recommendations
The following are some tips on how to properly attach a fishing line to a spinning rod:
- The “loop to loop” method is completely reliable.
- To prevent entanglement of the main fishing line, it is necessary to operate carabiner devices and swivels.
- It is desirable to tie carabiners and swivels with a fixed structure.
- For binding leash with fishing line, you can use the simple method of "loop into loop".
- More than three leashes should not be tied to the main fishing line.
- For complex use, it is better to use a "snake" node.
- For this configuration, you will need to leave the long edges of the leashes, which will subsequently reliably fix additional elements.
- Any knot formation has a specific strength parameter.
- Any, even a novice angler, is able to master different weaving techniques of the nodes under consideration.
- A well-formed leash plays an important role in the final success. Weak tackle can easily go under water with fish.
- It is worth noting that each type of assembly has its own strength and reliability, and is also subject to rupture under certain circumstances.
Finally
As can be seen from the article under review, there are no special problems with attaching the leash to the main fishing line. In this case, be patient and tune in to work that is not particularly difficult, but without dexterity to cope with them is problematic. The operation may not work out the first time - do not despair, try again, and everything will be implemented. Thin and small nodes - it is not so easy to do as it seems at first glance. Remember the famous proverb that the gods did not burn pots. Everything is known by comparison, and experience comes with time. Several workouts will make it possible to make an excellent fishing device. In this case, you will understand where to look for the cause of the malfunction, in case the device goes out of operation.