A range hood is one of the main elements that should be present in every home. It is important that the person in the room breathes fresh, cleaned from bacteria and dust air. Hoods play an important role in air purification in a wide variety of rooms. However, without an additional element, namely a filter for the Krona hood, this is not possible. An exhaust filter is an important, even basic element, capable of trapping grease, soot and other harmful particles.
What are the filters for the hood
Cleaning filters for hoods come in three types: aluminum, acrylic and charcoal.
- The Krona aluminum hood filter is also called grease. Its main task is to capture fat particles. This is a reusable installation that is easy to clean and easy to install.
- Acrylic filter, like aluminum, performs a grease-collecting function. In addition, it serves as protection for the exhaust hood.
- The carbon filter protects ventilation not only from grease, soot and dust, but also eliminates unpleasant odors. Since it is so multifunctional, it can be safely called universal. The filter works according to the circulation mode with activated or purified carbon.
The main advantage of the carbon filter is its ability to absorb vapors and contaminants that other devices cannot eliminate.
Grease Filter Specifications
The Krona grease filter , or aluminum as it is also called, is designed to trap soot and grease. Grease filters are disposable and reusable.
The first devices are made of cardboard, non-woven and sintepon. So that every housewife can change the filter on time, special signs are applied to it, which disappear from the surface and signal that it is time to change the filter.
Unlike disposable devices, reusable ones after thorough cleaning can be used again. In turn, reusable filters are divided into two groups:
Outwardly, most filters resemble small rugs; they are included with many hoods.
Cleaning the grease filter
In order for the Krona hood grease filter to serve for a long time, it must be regularly cleaned of contaminants. Dirt and soot accumulated on the surface of the filter adversely affects the operation of the device. Thus, all fatty particles settle on the walls, ceiling and on the structure itself.
There are many different ways to clean the filter from dirt and grease:
- Soak the filter in hot water and add detergent, after ten minutes, clean the remaining dirt with a brush.
- In a soapy solution, lower the filter and add two tablespoons of soda. Wait a few minutes and rinse with clean water.
- In case of severe contamination, it is better to boil the filter for fifteen minutes in a large container.
Charcoal filter: features
Since the Krona hood charcoal filter is made of both plastic and synthetic fabric, the appearance of the devices is different from each other.
- A round plastic cassette is filled with charcoal.
- A filter made of synthetic fabric is impregnated with the same solution.
The principle of operation of the carbon filter for the hood is as follows:
- air entering the hood passes through a viscose dense layer saturated with a carbohydrate solution and is partially cleaned;
- then sent directly to the cassette, where special granules are located.
After several cycles, the air in the room becomes clean and freed from unpleasant odor. If the performance of the hood has fallen sharply and the filler is very dirty, it is best to purchase a new filter. To avoid this, it is worth choosing a filter with a sensor that signals an immediate replacement.
Filter setting
Before proceeding with the installation of the Krona hood filter, you should carefully read the instructions that came with the device. It indicates in what order the installation of the filter is necessary. Sometimes there are pictures in the instructions that greatly simplify installation work.
To install a carbon filter that looks like a rectangular panel, you need to follow a simple instruction and follow the sequence of installation rules:
- unpack the product and fix the mounting bracket;
- open the door and remove the grease filter;
- install the carbon filter and fasten it with a screw;
- install a grease filter and close the door.
Benefits of Circulation Devices
Customers often ask themselves why buy Krona hood filters when ordinary ducts exist, as this is an additional expense. Despite the fact that a hood with a filter costs a little more, it has a lot of advantages, namely:
- Compactness.
- Thermal insulation.
- Easy care.
- Simple installation.
- Autonomy.
These installations have practically no drawbacks, so they are so popular. All you need to do is change the filter on time. Simple operation, but how much benefit such a device will bring to the owner, equipped with a hood of this kind of addition. The filter for exhaust with a carbon filler is indispensable, because it is characterized by a mass of positive characteristics and, importantly, makes the air really cleaner.
By purchasing a Krona Kamilla hood filter, you will never regret your choice. Easy installation, quick cleaning and, very importantly, reasonable price. Timely replacement of filters will extend the operating life of the hood, to clean the room with dust, bacteria and unpleasant odors.