Modern repair is difficult to imagine without the use of drywall. With his help, walls are leveled, partitions and boxes are erected. In terms of finishes, this material is not particularly whimsical, however, heavy lining is not mounted on it. Is it possible to apply liquid wallpaper on drywall? We will try to find a comprehensive answer to this question and consider the technology for carrying out such work.
Features Liquid Finish
Liquid wallpaper is based on cellulose, textile fibers, adhesive components and decorating agents. Finishing from such compositions has no seams, is easy to repair and is characterized by a long service life. Wallpaper is applied on both horizontal and vertical surfaces, which allows you to design with their help multi-tiered ceilings and curly structures made of drywall.
But is it possible to combine these two materials? Do liquid wallpaper apply on drywall? “Of course you can,” experts in the field of interior decoration are responsible. Moreover, there is nothing complicated in this process. The peculiarity is only that the surface of drywall should be properly prepared. How to do this, we will describe below.
What materials and tools will be needed to work?
To properly apply liquid wallpaper on drywall, prepare all the necessary materials. In the process, complex tools and equipment are not used, but the simplest devices will be useful to you. These include:
- container for mixing the working composition;
- spatula for applying the mixture to the walls;
- a special trowel for smoothing the applied finish;
- dry mix "Liquid wallpaper";
- water;
- putty;
- primer;
- serpentine tape;
- moisture resistant paint of white color.
If you need to process the ceiling, it is better to use a special hopper gun with a nozzle diameter of about 4 mm. This device will significantly speed up the work, however, in the absence of such, you can do with a conventional spatula and a ladder of a suitable size.
How to prepare the base?
Understanding the question of how to apply liquid wallpaper on drywall, you should pay attention to the fact that in this process special emphasis is placed on surface preparation. Since this finish is quite wet, drywall joints should be protected from moisture.
The fasteners that were used in the installation process of the drywall construction also need additional processing.
The stage of preparation of the foundation is as follows:
- The entire surface on which the composition will be applied is coated with a primer. Particular attention is paid to the joints of the plates.
- All seams and corners are glued with reinforcing tape. It will prevent surface cracking during operation.
- Hats of metal fasteners are covered with putty. Similar processing is carried out in the area of joining sheets. Many masters are concerned about the question of whether it is possible to apply liquid wallpaper on drywall without putty. You, of course, can refuse preparation, but at the same time there will be a high probability of bloating of seams and manifestation of rust through on wall-paper.
- When the putty is completely dry, the surface is primed again.
- At the final stage, the base is covered with white paint.
Since moisture can penetrate deep into the sheet, self-tapping screws can begin to rust, which will manifest through the finish. For this reason, experts recommend covering the walls with water-repellent paint. However, with a careful approach to puttying problem areas, you can do without additional protection.
How to prepare a working mixture?
To apply liquid wallpaper to drywall, you need to properly prepare the working composition. To do this, read the instructions on the packaging of the dry mixture. In most cases, the fibrous powder is packed in small bags of 1 kg. The contents of one such packet are poured into a prepared container and filled with water in a ratio of 1: 6 (where 1 part is a filler and 6 parts is a liquid).
The resulting mixture must be thoroughly mixed. You can take the composition with your hands, squeeze it, knead the lumps. The main thing is to ensure that each fiber is saturated with water.
If the composition is supplemented with decorative additives, they need to be added to the mixture at this stage. After that, the liquid composition is transferred back to the bags and left for 10-15 hours.
How to apply liquid wallpaper on drywall?
Before use, the working mixture is removed from the bags, poured into a bucket and mixed again. If lumps are found, they must be well kneaded.
In order to glue liquid wallpaper on drywall as beautiful and quick as possible, in one step you should cover the wall from one corner to another. If you take a break in the middle of the surface, a seam may be visible on the wall.
The technology for applying the mixture looks like this:
- Put the finished mixture on the spatula, transfer it to the trowel and apply the fibers to the wall with reciprocating movements. At the same time, you do not need to rub in one place for a long time! Simply smooth the composition. The optimal layer thickness is 2-3 mm.
- In a chaotic direction, apply the composition to the entire wall. Try to work without interruptions.
- At the end of the work, look at the finished surface at an angle. So you can see the bulges and places where the mixture is poorly smoothed.
You can control the process using a lamp. Bring the light source close to the wall and see if there are any areas that cast a shadow. If any are found, walk over them with a trowel again.
Useful Tips
The drying time of the surface is 2 days. During this period, it is undesirable to open windows and prevent the formation of a draft.
If you apply wallpaper in a room with a humid climate, additionally cover the walls with a transparent layer of varnish. It will extend the life of the finish and protect it from mold.
If during the operation of the wallpaper some section has lost its original appearance, it can easily be repaired. Remove the damaged coating and apply a new mixture to this area.
How to remove liquid wallpaper from drywall? To do this, use a small spatula and water. Moisten the desired area with water and gently pry off the finish. So clean the entire area you need. If you do not have dry powder left, you can use the removed fiber. To do this, re-soak them in water, add a little glue and apply the mixture on the wall again.
Material Reviews
So, is it possible to glue liquid wallpaper on drywall? Feedback from consumers and specialists comes down to one answer: it is possible. This method of decoration allows you to beautifully design complex structures that are difficult to paste on with rolled wallpaper.
The absence of seams, rich colors, attractive appearance - these are the main qualities of the material for which customers choose it. However, if you decide to apply wallpaper on drywall, focus on high-quality processing of the base. Unfortunately, you can find reviews that moisture penetrated into the seams led to swelling of the sheet material. But it is worth noting that such a phenomenon is possible only if there is a violation of the technology for applying the composition.
If you have chosen this finishing method, along with dry mixes get a serpentine tape, primer and putty. In this case, you will be guaranteed an excellent result.
findings
Having considered the question of whether it is possible to smear liquid wallpaper on drywall, all concerns about damage to the foundation can be immediately thrown away. If the composition is prepared in accordance with the instructions for use, and the seams between the plates are protected, there will be no difficulties.
The mixture is applied very simply, which allows you to do your own work and save on the services of specialists. If you show imagination, then on the surface you can create a variety of patterns from compositions of different colors. Additional varnish processing will allow you to wipe the walls and ceiling with a damp cloth, which will ensure cleanliness and fresh air inside your home.
All these qualities make liquid wallpaper a fairly popular finishing material. Moreover, they are fully compatible with plasterboard that is in demand today.