The driver is often lost and does not know what to do if his battery suddenly refuses to turn the engine starter and does not start the power unit. Naturally, you can push the car, use the "crooked starter", or you can go and buy a new battery. But if you know how to properly maintain the battery, then such a situation by surprise will not catch you.
This procedure involves periodic charging of the battery, which is the most economical and effective way to ensure a guarantee of engine start. Charging the battery yourself is a very easy process, and
anyone can cope with it. True, there are some rules that should not be violated.
First you need to solve the problem of how to remove the battery. To remove the battery from the machine, disconnect the battery terminals to prevent a short circuit. This will save wiring from damage, and in some cases from fire. When answering the question of how to remove the battery, it is worth noting that you first need to disconnect the negative wire from the battery.
If the battery needs to be removed from the engine compartment, then the positive cable must also be disconnected and all fasteners unscrewed. So, with how to remove the battery, figured out now what to do next.
The first step is to prepare the battery for charging. It is worth noting that it is not necessary to remove the battery from the car, but in this case everything going
to her, the wires should be disconnected. The chemical inside the battery must gain access to fresh air, for which purpose the protective bolts are removed or the cover is removed.
When answering the question of how to properly maintain the battery, it is important to note that the liquid level in it plays an important role, and therefore it is necessary to monitor it. If the liquid does not suffice to the required level, then distilled water or electrolyte must be added to the banks, it all depends on the capacity of the liquid. If you ignore the procedure, then the plates inside will simply burn out, and the device will lose the ability to hold an electric charge.
After servicing the battery, it must be connected to the charger, while the power on the charger itself must be turned off. When all the wires are connected to the appropriate circuits, you can plug in the network.
Qualitative and correct charging will be carried out when the current on
The charger will be set to minimum. In this case, the battery will be able to hold a charge for a long time. When the charge level in the battery reaches the required value, the battery can be turned off, wiped, and the protective cover installed.
When the charging procedure is completed, the battery is installed on the car. All actions are similar to how to remove the battery, only they are performed in the reverse order.