The process of replacing the cabin filter can be said to have grown with incredible rumors. The procedure is very time-consuming and it is necessary to clearly understand everything in order to get to the filter. Oxygen enters through the heating and air conditioning system into the air purification system itself.
A very important detail
on the Ford Focus 2 is the cabin filter. Replacement is carried out regularly every 20,000 thousand kilometers. Regardless of the mileage, a deformed or damaged filter should be replaced. Note that the part cover is located in the passenger compartment, directly under the dashboard. The process of replacing a part is somewhat simplified if you put the original filter in the car - the reviews of the owners of this car indicate specifically at this point. The fact is that the original filter is easily twisted, it is elastic, making it easily bent. This greatly facilitates the installation process. And most importantly, after releasing it, it immediately takes on its initial form. This all allows the owner to not remove the gas pedal. If you still removed the pedal, then it is best to change the compressed standard nuts.
Ford Filter Replacement Reports
In order for the air in the car interior to become better and cleaner, it is necessary to regularly replace the cabin filter. You can also insert a carbon filter at the time of the next replacement . How to change the “Ford Focus 2” cabin filter? Replacement is as follows.
Initially, unscrew the three nuts, and remove the gas pedal. Thanks to this simple procedure, we lift it up and try to put a slipper behind the steering shaft. The filter is hiding here. The following is an absolutely simple procedure. We turn off the screws, we pull off the far side of the cover fastening in the direction of the pedals and remove it. We take out the old, failed filter and install a brand new air purification element. Now put the filter cover in place. Due to the inconvenient location of the upper self-tapping screw, it will be difficult to tighten it. On this at the time of installation will have to spend a little effort and nerves.
How to facilitate the installation of the filter cover?
You can resort to improvisation. Try not to screw the upper screw at all. Limit yourself to just the bottom two. Then carefully place the gas pedal in its rightful place.
How long does it take to replace a cabin filter with a Ford Focus 2? Replacing this part will take about forty minutes. We can say that the costs are a penny, but the air in the cabin has become much fresher and better. Repairing "Ford Focus 2" is a time-consuming task, but the result will be excellent, since freshness in the cabin is always pleasant for both the driver and passengers.
How to replace the filter and not remove the gas pedal?
How to update the “Ford Focus 2” cabin filter? Replacement is made without removing the gas pedal.
To do this, “arm” with a 7/10 key (off-plan), bedding and a flashlight. The gas pedal is mounted on three nuts. With a little effort, you can reach the mounting nuts on the filter cover. In this position, it will be difficult to turn the key, but "art" requires sacrifice. To facilitate the task, it is necessary to unscrew the screws. Then we remove the cover and easily take out the cabin filter "Ford Focus 2". Replacing a new filter is not so easy. Most importantly, try to squeeze it harder and push it into the intended place. After that, a new cabin filter for the Ford Focus 2 is ready. The cabin filter, as the name implies, cleans the air entering from the air conditioning and ventilation systems. Compared to other machines, the Ford Focus 2 repair is a rather complicated, time-consuming and not entirely simple process. However, the car has its advantages, namely the fact that the cabin filter for the Ford Focus 2 is not at all expensive and is a practical and universal part. It is easy to find in any car supermarket.
Removing and replacing lamps in the front of the vehicle
Repairing a vehicle like the Ford Focus 2 is a pretty serious business. What to do if it is necessary to replace only PTF lamps? To do this, you will need a Phillips screwdriver. We open the hood and on the headlight we unscrew the bolt, wring out the clamps. After this procedure, you can remove the headlight and remove the wiring to the sides. This will provide access to the headlamp. By turning the light element towards the wing, you can remove it. We click on the terminal and easily remove the lamp. We replace it and collect everything back. This procedure will take approximately twenty minutes.
Removal and replacement procedure for fog lamps
To replace the fog lights, you will need a flat screwdriver and a TORX T25 wrench. Firstly, you should pry off the plug of these headlights with a screwdriver. Next, they must be removed and two bolts unscrewed, resorting to a wrench. We take out the old fog lights and disconnect the terminal from the lamp. We replace and install everything in its place.