If it happens that the tap is leaking, then often many people turn to management companies and invite a qualified plumber. But not always these specialists can be waited on time. So what to do if a faucet is flowing in the kitchen? Any home master should know how to fix it with your own hands and what tools are needed for this.
Preparatory work
The first and most important rule for all plumbing repairs is to turn off the water supply.
Often, the valves that are responsible for it can be found in the toilet. In order to turn off the feed, just turn the tap.
However, due to the fact that there were no problems with the equipment and these cranes were not used for a very long time, the valves can rust or block. These valves should be designed with utmost care and very smoothly. Gradually, you can increase the force, also do not forget about lubrication. This is the first thing to do before fixing the current faucet in the kitchen, in the bathroom and in any other room.
Necessary tools
Before work, it is important to assemble the necessary set of tools. They should be at hand at any time.
So, for work, you need an adjustable wrench, a flat-blade screwdriver and a Phillips, wrenches. Often, this modest set should be enough. It happens that a faucet suddenly and strongly flows in the kitchen. How to fix which keys you need is not concrete. The fact is that each manufacturer has its own standards. A set of keys that every motorist will have is enough.
Also, it will not be superfluous to prepare various additional elements. These can be pieces of rubber, leather, from which gaskets can be made. A fluoroplastic sealant in the form of a tape, rags, detergents may also be useful.
Sometimes during the repair process, keys or any other tool may fall - so as not to damage the expensive sink or sink, put a sponge, rag, or something else under the bottom that can absorb shock.
Why the faucet flows in the kitchen: how to fix and typical malfunctions
Leaking taps are a fairly common occurrence.
But there are not so many reasons that can provoke a breakdown. There are four of the most common ones.
Poor quality cranes
Often acquiring plumbing fixtures, many people are guided by considerations of economy and choose Chinese or Turkish products. In this case, people are happy that they were able to save in this way.
But this tactic when buying faucets is extremely erroneous, and the joy of the amount saved does not last long. This small amount may cause leakage. Well, if at that moment when the crane fails, someone will be at home and will be able to shut off the water very soon or repair the equipment. But more often it is different.
You should never save on things like plumbing fixtures. Be sure to make sure before buying that the offered product is not made in China, but at least in Russia or in Europe. Also, cheap products for a well-known brand are a cause for suspicion. Dear branded products in our markets are 50% fake.
Sometimes it happens that even on expensive equipment something can leak.
Then you should familiarize yourself with other reasons to understand how to fix the faucet in the kitchen. It also flows in the case of illiterate installation.
Incorrect installation
You can also safely include manufacturing defects or errors in the assembly of the product here. If you purchased a high-quality faucet, at a serious price, it is worthwhile to take responsibility for its installation. Various errors that may have occurred during the installation process can minimize all the benefits of an expensive product.
Violation of the operating rules
This is another popular reason. It is very important to remember that the crane, like many other instruments and devices, has operational characteristics. If during the use excessive efforts were made and pressure was exerted on the crane parts, then you should not think that for the device it all went without a trace.
Natural wear on parts
During frequent use cycles, various moving parts of the product may wear out.
Especially often
rubber seals and various gaskets come into disrepair. In this case, there is nothing easier than fixing the faucet in the kitchen. Flowing? It is enough to
replace the gaskets.The problem with gaskets is more relevant for traditional models with two valves. In the case of ball valves, the device of which is seriously different, you will need a different repair scheme.
Two-valve tap repair: gasket replacement
How to fix the current faucet in the kitchen, if it flows constantly, no matter how tightly tighten it, the whole thing is in a worn gasket. It must be replaced. The first step is to unscrew the valve body - for this it is necessary to rotate it clockwise.
Then remove the damaged seal. If a new gasket is not available, it can be made of rubber or leather. It is recommended to use the extracted part as a sample. Then a new gasket is installed in place of the old one. A sealant is wound around the stop edge, the valve body is mounted in its rightful place.
For reliability, it is worth tightening the valve a little with wrenches. So that you do not have to spend time on the process of manufacturing a seal, it is easier and faster to purchase one in a store or on the market.
We replace a sealing insert on an epiploon
During operation, wear on this liner can cause leaks. What to do in this case? How to fix a faucet in the kitchen? It flows most often when the element is open. Water passes between the nut on the stuffing box and the stem on the valve.
Using a screwdriver, unscrew the nut on the gland. Further, an insert is made of a fluoroplastic tape. Then it is installed in place of the worn out, and the nut is twisted.
If flowing from a spout
Often a tap spills in the kitchen. How to fix it? Very, very simple.
To do this, unscrew the outer nut. Then, very carefully, the spout rotates and rises, and after that it is removed. It is necessary to carefully check the insulating gasket and the expansion ring. If something is worn out, replacement can solve the problem.
We repair spherical in the kitchen
Fashionable and modern cranes have a more complex device, unlike valve models. How to fix a faucet in the kitchen? A ball valve is flowing - it means that some pollution has got inside it, which prevents the mixer from working normally.
So, to defeat this problem, the crane is disassembled and cleaned.
First of all, the screw-clamp lever is removed with a screwdriver. Then very carefully remove the lever. Using a screwdriver, unscrew the screw, dismantle the dome and seal from plastic.
The latter should be carefully examined, remove all plaque on it.
If it is worn, it is recommended to purchase a new part. Then the ball is removed and carefully inspected - if there is damage, replacement is necessary. When wear is observed on the seals that fix this ball, it is also recommended that they be replaced immediately. Then, after replacing parts or cleaning them, all plastic elements must be lubricated with the composition recommended by the manufacturer. It sometimes happens that even after replacing parts, a faucet still flows in the kitchen. How to fix it? The repair scheme will be slightly different - here you need to replace the entire cartridge cartridge.
A new tap is flowing: what to do?
Sometimes such situations also happen. The reason for this phenomenon is manufacturing defect. There may be various defects inside the faucet, such as fragments or cracks. Do it yourself with your own hands. Need to change the product from the seller. Now you know how to fix the faucet in the kitchen. Is water flowing? This is no longer a problem.