How to wash sintepon jackets: manufacturer's recommendations, the choice of detergent and mode when washing in a car

How to wash sintepon jackets? After all, these products have become popular not only due to a wide range, but also because of their operational properties (they are able to maintain body heat even at a temperature of -30 ° C) and low cost. But such a jacket will please for a long time only if it is properly washed.

Manufacturer's Tips

Before washing sintepon jackets, the first thing to do is to carefully study the available labels. As a rule, manufacturers indicate to them all the nuances of cleaning the product, both in the machine and manually. It indicates the washing temperature, mode and drying methods.

In addition, there are general rules for washing the studied thing:

• glued synthetic winterizer products are strictly forbidden to be washed; only dry cleaning is suitable for them;
• In an automatic washing machine you can wash products from needle-punched or thermally bonded synthetic winterizer.

These rules are important to follow! Before washing sintepon jackets, you should not soak them, because stains may remain on the surface. Before sending to the machine, it is necessary to remove the fur or pack it in a special case.

It is impossible to squeeze sintepon jackets with a typewriter, since this process will bring the filler into one lump.

How to choose a mode

Often the question arises from the owners: "Is it possible to wash a synthetic winterizer jacket in a typewriter?" Yes. But to maintain the integrity of the product and the operational characteristics of the insulation, it is important to choose the correct mode. Most often it is recommended to use the functions of delicate and hand wash (if there is no other information on the label, or the label is completely absent).

A positive result can be achieved by repeated rinsing in a large amount of water (rinsing can be manual or performed by switching on a special mode). Such a thorough rinse is necessary in order to prevent the appearance of white stains, especially if granular powder was used.

The knowledge on how to wash a synthetic winterizer jacket in a washing machine also lies in determining the correct temperature. The studied filler does not like high temperatures. Therefore, it is recommended to wash such jackets at 30-40 ° C.

Helper balls

If you are not sure whether the syntepon jacket can be machine washed, but hand washing is not possible, then you should also think about purchasing special balls with spikes. By the way, if you couldn’t find any special ones, you can go shopping for pet supplies and purchase those that animals play with. The effect of them is the same. Their principle of action is as follows:

• when the drum is twisted, they hit its walls, and then bounce off them;
• after that, they hit the jacket, thereby breaking the lumps of synthetic winterizer (and preventing its clumping), and also knock out dirt.

The advantages of using such balls when washing sintepon products are obvious:

• washing becomes more efficient;
• the consumption of washing powder is reduced;
• white stains on the jacket almost never appear;
• things dry out faster.

How to choose a tool

It is important not only to know how to wash sintepon jackets, but also what tool to choose. For such products, it is better to take the powder in liquid form. The thing is that it is very difficult to rinse such a product, which means that there is a great risk of white stains on the raincoat fabric. If there is no liquid product at hand, you will have to increase the number of rinses (this can be done manually or you can start another wash cycle in the machine, but without adding any powder).

Before use, you need to carefully study the composition of the powder. It should be free of bleach (even if the white jacket is washed) or stain remover. These components are detrimental to sintepon.

During the season, the jacket can be washed about two to three times. In this case, ironing is allowed, but this can be done through gauze. In some cases, it is more advisable to use a steamer.

Hand Wash Features

It is strictly forbidden to wash some types of studied products in an automatic washing machine. This is fraught with unpleasant consequences. Do not do this even in those cases if the label does not indicate in what mode to wash the padding jacket. This primarily concerns products with fur or other decorative inserts. When washing by hand, the following rules must be observed:

• water temperature should not exceed 50 ° C (considered optimal 30-40 ° C);
• there should be a lot of water, therefore it is better to wash in a full bath;
• immersing the product in water is possible only after the washing powder (or gel) is completely dissolved;
• it is impossible to twist or compress the product, it can be slightly wrinkled, and if there are surface contaminants, brush it;
• it is impossible to soak a product;
• during washing, change the water several times (until the water is no longer soapy);

• you need to squeeze the jacket as accurately as possible, without twisting, it is better to squeeze out the water from the synthetic winterizer with your palms a little;

• after rinsing, the jacket can first be hung over the bathtub to make glass water, then laid out on a terry towel, neatly straightened, then you can hang it again until it dries completely.

Rules for washing a denim jacket on a synthetic winterizer

There are some differences in the washing of a conventional raincoat jacket and denim. First of all, this concerns preparation. Before washing a synthetic winterizer jacket in a typewriter, it must be turned inside out, which will not spoil the existing decorative elements (rhinestones, stripes, etc.), all the locks should be fastened and, of course, all foreign objects should be removed from the pockets. You also need to disable the spin mode.

After the end of the washing process in the machine, the product must be manually rinsed. You need to do this at least three times, while twisting the product is not worth it, you only need to mash it a little.

Now you can start drying. First, the product must be placed on a hard, even surface and left in a ventilated area, periodically turning over to prevent the appearance of a musty smell.

It is impossible to dry a denim jacket on a synthetic winterizer (just like any other with a similar filler) near heating devices. You can speed up the drying process using a fan.

How to wash sintepon jackets from Bologna

Bologna is a delicate material, so washing in an automatic washing machine is undesirable.

First you need to remove all surface contaminants. For example, it is recommended to rub greasy places with household soap and leave for 2 hours, and fresh greasy stain can be sprinkled with salt or mustard. The following instructions will tell you how to properly wash a padding jacket manually:

1. Heat water to 40 ° C. Dissolve the selected liquid detergent in it.
2. Soak the jacket in this water for 15 minutes, then wipe the most dirty places (collar, pockets, elbows) with a brush with soft bristles. In some cases, it may be necessary to use household soap if the pollution is heavy.
3. Now you need to rinse the jacket. Water must be changed at least three times. At the end, the jacket needs to be washed with shower water. You need to do this until all the foam is washed.

Ways to help straighten a synthetic winterizer after washing

If it was not possible to avoid trouble when washing the synthetic winter jacket, and the filler still turned into lumps, then the situation can be saved as follows:

• first place the washed product on a horizontal surface, allow it to dry, but not completely, then place it on a hanger and beat it with a bamboo stick in this condition;
• lumps can also be broken with a vacuum cleaner, for which a pipe from the device must be led from the place where the lump formed to those places where there is no filler;
• The radical method is the manual expansion of the synthetic winterizer, for which you need to spread the lining, straighten the filler, and then sew it all up again.

Removing stains at home

If there are stains of any origin on the surface of a sintepon jacket, only those means for their removal should be used that will in no way damage the structure of the material. Stains must be removed prior to general washing. This sequence will avoid color changes.

The way stains are removed depends on their origin:

• you can remove lipstick with medical alcohol;
• foundation and lip gloss are easy to remove with toothpaste (plain white, not colored gel);
• dishwashing liquid will save from oily stains;
• blood stains can be removed with laundry soap (brown, not white).

Any treatment should be carried out with a brush with a soft bristle or a sponge.

The synthetic winterizer jacket is convenient, beautiful, cheap, and practical. In this product, both the girl and the man will feel comfortable and warm. But to preserve all these properties of the jacket will help only the proper washing in compliance with the washing regime, drying rules and the choice of detergent.