ZyXEL Keenetic Lite is positioned by the manufacturer as an entry-level Internet center. It has the most modest characteristics among the entire line of devices of this company. Such functionality is more than enough for organizing a small LAN of a small office or just for home. Some of the most significant options are missing, those that are in devices of the ZyXEL trademark of a higher level, but their presence is not absolutely necessary for those segments for which this router is positioned. In turn, his price has decreased, this router is the most affordable of this line of network devices.
The ZyXEL Keenetic Lite package is as follows:
- Internet center.
- 5 decibel omnidirectional signal antenna.
- Power Supply.
- Ethernet cable.
- User's manual.
- A CD-ROM with a set of documentation and Zyxel NetFriend proprietary software for parameterization.
- Warranty card.
As you can easily determine by configuration, something special can be expected from this network device. The usual entry-level router with standard equipment.
The form factor for this device is standard. The ZyXEL Keenetic Lite case is similar to the older models with the “Giga” and “4G” indices. All the same white plastic with front display and rear patch panels. Ahead are the following LEDs: power, wireless network operation, connection to global resources, indication of 4 working wired LAN ports. From the back of the case there are 4 ports for connecting devices over twisted pair, an input connector, an attachment point for an antenna, and a power supply socket to a router. Additionally, there is a button that allows you to return all the parameters to the factory settings. It is designated “Reset”. To activate it, you must press it and wait 10-15 minutes until the initialization of the Internet center.
The connection scheme is no different from most devices of this class. Immediately you need to screw the antenna to the contact. A wire from the provider is installed in the input connector. The bundled
Ethernet cable should connect the PC and the router. Then the power supply is connected to the corresponding socket and voltage is applied. After the download is complete, the router is ready for parameterization.
There are 2 ways to configure ZyXEL Keenetic Lite: either using special software, or standardly using any browser. In the first case, the program is launched from the disk that comes with the kit, and a phased configuration is performed in accordance with the inherent algorithm. In another case, the browser starts. In the address bar, enter 192.168.1.1. The login and password for this router are standard for the entire ZyXEL line - admin and 1234. After entering them, you get access to the configuration and parameterization interface. Here the opportunities for networking are wider and it is recommended to use this particular method.
Here are the technical specifications of ZyXEL Keenetic Lite, a review without them would not be complete. They have the following:
- The maximum transfer rate is 150 Mbps.
- The antenna gain is 5 dB.
- Supported Wi – Fi Standards - b / g / n.
- Support for encryption standards - WEP, WPA / WPA2 and 802.1x.
- The operating frequency is 2.4 GHz.
As a result, it can be noted that this manufacturer turned out to be an excellent device. This is confirmed by the ZyXEL Keenetic Lite reviews, which are only positive. This company has not changed the established tradition and released another excellent product.