Today we’ll talk about how to glue two kinds of wallpaper in the bedroom, making it unique and cozy. Work on pasting is usually the final stage of repair and is among the decorative ones that are not particularly difficult, however, provided that you take up the matter with confidence in success and, best of all, the two of you.
The article will provide step-by-step instructions for the entire process. It will help even beginners do a good job. So here we go!
Choose a wallpaper
To make the bedroom truly cozy, choosing a wallpaper, remember its size. Small rooms require a light shade of the walls with a fine pattern or without it at all. At the same time, try to get in tone with the color of the furniture - this way the room will appear more spacious. A wide bedroom with high ceilings is perfectly decorated with a more saturated color scheme.
To give special comfort or to visually highlight a sector, for example, a place where there will be a dressing table, the head of the bed or (on a large area) area with upholstered furniture, two types of wallpaper are chosen. In the bedroom This is a fairly common design decision.
At the same time, be sure to consider the level of illumination (do not get carried away by the dark color in the room facing the north side) and remember also that too bright and saturated drawing will tire and can even cause irritation.
Some more tips
When wondering how to glue two kinds of wallpaper in a bedroom beautifully, remember the color: be sure to soften the cold tones, “dilute” them with warm colors.
Dark tones will help to visually reduce the size of the room if you feel in a spacious room with high ceilings too uncomfortable. In this case, combination and come in the form of a horizontal panel or individual vertical stripes of different colors.
When creating panels, place dense relief wallpapers below, and paste over the upper part of the wall with lighter and lighter ones.
Especially successfully combined wallpaper of the same company, the same texture and width, but having different shades or, for example, embossing.
How many rolls do you need to buy?
The bedroom is a very personal area. And how it will look: luxurious or ascetic - you choose.
Having thought over the color and the “geometry” of the walls (that is, how to glue two kinds of wallpaper in the bedroom: combine them horizontally or vertically), calculate the required number of rolls. To do this, take into account the area of the surface to be glued in the room and the dimensions of one roll (as a rule, they are 0.5 m / 10 m). A glue suitable for each type of wallpaper and its quantity will be advised by experienced sellers.
By the way, it is best for beginners to paste non-woven wallpaper, because they perfectly hide small irregularities on the walls, and the joints between their sheets are practically invisible.
We prepare the walls for pasting
Wallpaper of two types in the bedroom (photos of successful interiors are provided for your attention in the article) must be glued to a well-prepared surface. To do this, draw hot water into the basin. With a clean washcloth, wet the old wallpaper, and after 15 minutes, when they are bubbling, tear them off. In those places where the wallpaper is held firmly, wet again and try to clean the walls with a spatula.
Now deal with irregularities - you need to remove all the tubercles, sand the roughness with sandpaper, and cover the holes and all kinds of indentations with finishing plaster. In a situation where the walls are glued for the first time, they need to be primed.
How to paste two types of wallpaper in the bedroom: instructions
- Dissolve glue for wall-paper as it is specified in the attached instruction.
- Prepare the floor (wash it clean) - on it you will cut off strips of the desired length from the roll and grease them with glue.
- First try on a roll against the wall, and then cut the desired length, leaving a small margin. If it is necessary to choose strips according to the picture, try each one alternately, combining the details.
- Use a roller or brush to work.
- Lubricate the cut-off strip with glue, then fold in half, with the glue surface inward, and leave for five minutes to allow it to soak. At this time, to keep the wallpaper better, apply glue and a wall.
- Then, climbing up a stool or stepladder, let one person apply a wallpaper strip at the top and another at the bottom.
Smooth the sheet from the center to the edges, pulling it diagonally. To do this, use a clean, dry cloth or a special roller. Best glued butt. Cut the excess underneath after drying with a ruler and a knife blade.
Wall mural - is it no longer fashionable?
Before sticking a wallpaper of two kinds in the bedroom, remember that they will not only divide it into functional zones, but also help visually change the ceiling height, move the walls apart and adjust the light level. Wall murals are especially effective in this case.
Nowadays, they not only did not go out of fashion, but also gained special popularity, since with their help you can create an absolutely incomparable interior. In stores you can buy not only ready-made, but also order your own, exclusive, using the photographs you provide.
Now wall murals are produced on a fabric, non-woven or paper basis, and the images on them occupy either the entire wall, or part of it, in the form of a panel.
How to paste wallpaper in the bedroom of two types: photo wallpaper and ordinary
Remember that the wall for wallpapering is carefully prepared: all the bumps, joints and cracks are carefully putty. Then the wall is covered with a water-based paint in one layer to prevent moisture penetration and the appearance of dark spots, and to achieve good adhesion, glue is applied to it.
Before starting gluing, check that all the sheets are joined correctly. In order not to disturb the drawing, make notes on the wall in the places allotted for each of its parts. To do this, use a plumb line, a long ruler, a building level and a pencil. As a result, on the wall you will find the drawn and numbered cells for each element of the picture.
Please note that when decal murals need only use the adhesive recommended by the manufacturer. And pasting begins from the middle of the wall, gradually moving to the edges. Slightly not reaching the corners, cut the wallpaper or, conversely, pasting the corners with wallpaper, put them on adjacent walls. Docking different types of wallpaper in the corners do not!