Ceramic tile is an excellent finishing material for rooms with a high level of humidity. Due to its hygienic properties and ease of use, ceramic tiles in the bathroom fits perfectly. It is very easy to wash, it looks stylish. It protects against moisture and is not susceptible to mold. In addition, this material is considered refractory and very reliable.
But at the same time, when you are going to make a hanging cabinet or a mirror in the bathroom, you can meet difficulties. Ceramics is a hard, but at the same time brittle material. Therefore, it is important to know how to drill the tile so as not to damage it. From careless handling, it can become covered with cracks and break.
There are several rules on how to work with tiles and ceramic tiles. Holes should be farther from the edges, use a professional power tool. When drilling ceramic tiles, it must not be allowed to overheat.
When choosing tools to solve the problem of how to drill a tile, stop at the drill with the ability to control the rotation of the drill. A tool with a high speed of rotation can damage the tile or break it into pieces. An electric drill is best suited by controlling which you can smoothly change the speed of rotation. If there is no electric, you can use a hand drill. Initially, holes are made in the tile, and then attached to the place allotted to it. Before drilling a tile, it is necessary to pick up special drills. They must have solders made from a special hard alloy. In accordance with the size of the proposed holes, it is necessary to select the required sizes and drill bits. They are used at the last stage of drilling. If you plan to make several holes, then use the level.
Marker or marker on the tile must be marked where the hole should be. To do this, you need to make a small recess with a hammer, the smallest drill or a metal tap. When considering how to drill a tile, it is necessary, first of all, not to forget about caution when working with brittle material. The speed of the drill must be adjusted without pressure, very smoothly. If you have a percussion drill, then you must first use the shockless mode. After passing the hardest, upper part of the tile, you can switch to shock mode. As a tool for drilling, you can use not only a drill, but also a perforator. When working with it, it is necessary to select a drill of a larger diameter than a drill. This will protect the tile from splitting during the application of the impact mechanism.
These tips apply to drilling tiles that are horizontal on the floor. But sometimes the question arises of how to drill a tile, if it is already attached to the wall. Initially, the tile must be tapped so that there is no void under it, otherwise it may collapse during drilling. To avoid deformation of the tile surface, it is necessary to fix the paper rectangle to the place where it was supposed to make a hole. You can apply masking tape for this purpose . Such measures are also necessary so that the drill does not slip. To judge the drill, it must be lowered into the water.
The master, engaged in drilling tiles at home, must be able to handle the tool, have experience with it. If you are confident in your own abilities and are not afraid to harm the facing material, then feel free to start repair.