If in your winter most of the heat escapes through the window, then this situation should be corrected. Otherwise, your heating will be uneconomical. If you want to know how to seal windows for the winter, our tips will help you do this quickly and efficiently. Previously, a method of warming with newspapers or paper, which was molded on a soap solution, was very popular. However, this method harmed the windows, since subsequently strips could only be torn off together with paint. Yes, and the procedure had to be repeated every year.
Sometimes people are interested in
how to seal windows for the winter with fabric. This method is gentle, but it is very time-consuming. First you need to close all the cracks in the frames. For this, tow or foam rubber is usually used. Then you need to cut the fabric into strips, moisten well in soapy water and glue it evenly to the surface of the window. The material should adhere well. For reliability, you need to smooth it out.
If you have no idea how to seal the windows, you can use a special adhesive tape, which is intended for this. In principle, it can last on the frame for several years, but over time it will be very difficult to remove. For work, you can use foam with a self-adhesive base. In this case, you must know exactly the width of the gaps between the frames.
Since it is not difficult to seal windows for the winter with modern means, you only need to choose the appropriate method. For example, rubber or propylene inserts, which are of high quality and durability, can be inserted into the wings. However, from time to time they must be replaced, since under the influence of ultraviolet radiation they can lose their functionality. Often the owners of a house or apartment prefer to use silicone sealant, which can be applied both inside and outside the window in the place where the glass adjoins the frame. It should be noted that this method is practical. However, for effective sealing, you need to choose the right sealant.
How to close up the windows for the winter yet? You can solve the problem with a special putty, which is sold in the store. In principle, it can be prepared independently from chalk and alabaster (1: 2) or sand (3 parts) and flour (1 part), diluted in boiling water. Coat the gap with such a mixture with a spatula. Windows for
insulation needs to be prepared, that is, untwist the sash, check the strength of the glass. You may have to change the glazing beads. In order for the glasses to stand firmly and not to let the draft pass through the joints, install them on oil paint or putty. Next, you need to firmly press them with new glazing beads. After the glasses are fixed, it is necessary to additionally seal them with silicone at the junction with the frame.
If you still have no idea how to seal windows for the winter effectively, try embedding tubular gaskets in the sashes. This work, of course, is laborious, but you will forget about drafts and cold for a long time. All the funds presented have been tried in practice and have been more or less effective. Therefore, you can only choose the method that suits you.