How to put a password on Wi-Fi at home

Configuring access for a home router such as SOHO for a layman can seem like a pretty daunting task. This guide allows you to deal with it in a short time and perform everything in the best way. The article is a complete guide on how to put a password on Wi-Fi. This article is recommended for novice users of Windows.

Why change the password of the router?

If you are wondering about how to set a password on Wi-Fi, then you should know that this is a very important step, ensuring the network security from unauthorized access. The factory password of many models is standard, which means it is widely known.

A free access point untie the hands of a huge number of people who want to use free access to the network for their needs (not always respectable) or simply profit from other people's data. The network has many stories of how people connected to the point, stole all the data and went unnoticed.

An unprotected network password other than the standard one is dangerous for those who use it. It can cause a huge variety of troubles from file theft and virus infection to problems with the police, who will still need to prove the owner is not involved in actions committed from his address space. By the way, this article will not discuss the topic of how to set a password on a Wi-Fi DIR router, since the interface and the filling of this router are identical to analogues, for example, TP-LINK, D-LINK, which are already described in the paragraphs below.

Replacing the password of Asus routers

Devices of this brand are usually equipped with interfaces of two possible variations, but the steps for replacing the password are similar in both. By the way, if you want to secure your network, as well as have a more or less high-quality Wi-Fi coverage area, then Asus routers are the best on the market, but also the most expensive.

Step-by-step on how to set a password for Wi-Fi on an Asus router:

1. Connect to the device with a computer of any type capable of entering the network.
2. Access the address 192.168.1.1 through the browser to access the admin panel.
3. Very often factory network access keys for the username and password admin. In case of differences from this value, the details are indicated either in the user manual or on a sticker located on the body of the device itself.
4. After a successful login, you should refer to the "Advanced Settings" section of the "Wireless Network" category (Advanced settings and Wireless, respectively, for English-language firmware).
5. The main line of interest is WPA Pre-shared Key. The value entered in this field will be the network password. An alphanumeric meaningless set of more than eight characters is recommended.
6. It remains to apply the settings and disconnect from the panel.

This will replace the password. For further access, you will need to replace the connection details on all devices that have previously used the same network.

How to put a password on Wi-Fi TP-link

Do not be afraid, in general terms, the interface may differ slightly, but the buttons on the interface are the same as in Asus.

Step-by-step instruction:

1. Log in to the admin panel at 192.168.0.1 with the details Admin / Admin or indicated on the case.
2. Follow the following path: “Wireless Mode” - “Network” - “Wireless Security”
3. Select WPA-PSK / WPA2-PS. ” Of the two, the second is preferred as the more secure.
4. The “PSK Password” input field should be filled in with characters planned as a new password. Cyrillic and special characters should not be used, otherwise there are no restrictions, except for the length. No more than 63 characters, but no less than eight.
5. Confirm the changes and exit the admin panel.

The strong similarity of this algorithm with the previous one clearly demonstrates the similarity of device interfaces of various manufacturers. Having the skills to perform this procedure with one router, you can do the same with any others.

How to put a password on "Wi-Fi" D-link

Unlike other representatives of the routers, this one has a characteristic orange hue, unpleasant for someone, but it is from it that you can determine that the router is from D-Link.

Step-by-step on how to set a password for Wi-Fi in a D-Link router:

1. The admin panel is located at 192.168.0.1 or 192.168.1.1, depending on the specific model. It is worth checking with the manual or just trying both options.
2. Standard login details admin / admin or specified on the device.
3. Due to the difference in different firmwares, the main item required can be called in different ways. Possible options: Wi-Fi, Wireless, Wireless setup.
4. Next, select "Security Settings" or the one in the name of which will be Security.
5. From the choice of various options, you need to focus on “Network Authentication” and the type of protection WPA-PSK / WPA2-PSK.
6. The PSK Encryption Key, as elsewhere, requires eight to 63 Latin characters and numbers.
7. Cryptographic options are best left untouched.
8. Save new settings and leave the admin panel.

This completes the setup of a new key pair of login and password and you can proceed to the operation of the device.

Finally

As you can clearly see when reading the article, almost all standard factory settings of key pairs are identical for all manufacturers of routers. This is dictated both by considerations of convenience for the buyer, and established market rules for manufacturers of devices for this purpose.

However, using the device “out of the box” with this approach makes the buyer a victim of an attacker almost guaranteed. An unchanged router is like the wide open door of a bank vault in the wild west. Any network bully will happily take advantage of an oversight. Also, for a complete acquaintance with the router, in honesty, for a complete understanding of the process of how to set a password for Wi-Fi, we recommend that you read the user manual that comes with the router.