It is difficult for a modern person to imagine life without access to the World Wide Web. The times when there was only one computer in the family were long over. Now people use tablets, smartphones, laptops that are equipped with a WiFi module. A wired router without wireless support has already become irrelevant. He is not able to provide the Internet with all available gadgets. How to be? Of course, replace it with a device that works in WiFi mode.
Previously, routers were quite expensive. Their setup required special knowledge. Now everything has changed dramatically. Router manufacturers have tried to make their devices not only accessible to every customer, but also as simple as possible. This can be seen by customers who have purchased devices from brands such as TP-Link, Linksys, ZyXel, Asus, D-Link and others. Their range of products includes both budget models and expensive ones.
However, even though the configuration of the routers is as simple as possible, sometimes users encounter crashes. For example, the lack of a WiFi signal. There are many reasons for this malfunction. Therefore, let's figure out how to set up a WiFi router TP-Link and other brands, as well as fix problems with the wireless network yourself.
Wireless Network: Symptoms
As soon as the user first encounters a malfunction in the router, he begins to look for reasons in the device itself. However, in rare cases, it is it that fails. Typically, the problem is the settings. Moreover, it is important to pay attention that they need to be checked not only on the router, but also on a gadget that cannot connect to the access point. Most of all users care about why the router does not distribute the Internet via WiFi.
What signs may indicate a malfunction?
- There is no signal.
- Long connection time.
- Slow internet speed from router.
- Frequent network outages and reconnecting to WiFi.
If you find such signs, you will need to check the correct connection and configuration of devices.
Guilty Search
When you can’t figure out why the router doesn’t distribute the Internet via WiFi, but it connects to the network, you need to find out what or who is to blame. To do this, a number of specific actions are carried out:
- Cable provider. Its performance is checked in the following way: connect it directly to the computer and make all the necessary settings. If there are no problems with the Internet, then the reason is to look in the router.
- Wireless Settings After checking the cable and connection, we can conclude that the device itself is functioning properly. The problem may be with the wireless network configuration. There are such devices that are equipped with the function of turning on / off WiFi.
- Device Verification. There are times when a malfunction lies directly in the device that connects to the network. In order to verify its operability, it is enough to make a connection from another gadget.
Why does the router not distribute the Internet via WiFi? Causes
If with an active connection the user cannot access the global network, then the reason for this is the errors made when configuring the router.
- Incorrect entry / determination of IP address.
- The transmission channel is configured incorrectly.
- Invalid DNS value.
The first two errors are made by the users themselves when creating a wireless network. And this is the reason that the TP-Link WiFi router does not distribute the Internet. The same problems are relevant for routers of other brands. As for the last error, several factors can influence the value, for example, a virus on the device.
To resolve this problem, it is not necessary to contact qualified programmers. All that the user needs is a cable that allows you to directly connect the Internet, PC or laptop and, of course, the router itself.
How to set up TP-Link WiFi Router?
Devices of this manufacturer are in high demand among domestic buyers. Therefore, it is fair to start with it. Entrance to the settings is standard - enter the address in the browser bar. After authorization, you need to find the WAN item in the Network tab. It will prompt you to select the type of connection. You can find it from the provider. On the computer there are current values for the gateway, subnet mask, provided that the Internet cable is directly connected to the device. In some models it is possible to activate automatic detection. After that, you can proceed to the settings of the WiFi network. To do this, find the Wireless tab. In it, the user selects the item Wireless Settings. On the page that opens, you will need to enter the network name. Be sure to select the region for the correct operation. In the line with the transmission channel, it is recommended to set Auto. After that, click Save.
Now you can begin to protect the network. How to change the password on the TP-Link WiFi router? All tinctures are located in Wireless Security. Having come into it, the user is offered to choose the type of encryption. Most programmers recommend using WPA / WPA2. By activating it, you can enter a user key. After you must save and reboot the router. If necessary, the network access key (password) is changed in the same way.
Asus Routers: Wireless Setup
In addition to the two models described above, Asus routers are popular in Russia. They are easily and quickly configured using a special program. Ideal for a novice user. In modern models, the firmware has an intuitive interface. All tabs are presented in Russian.
How to change the password on the Asus WiFi router if you don’t remember it? Very easy. It is enough to connect the device directly to the PC via cable. Then make a complete reset. The router will reboot and the user will be able to enter all the data.
Network setup on a D-Link router
Why does the router not distribute the Internet via WiFi? In order to answer this question, you need to go to the "Network" tab. In the WAN section, check the correctness of the selected type of connection. It is important to note that there are some providers that work with binding to MAC addresses.
Most devices with new firmware have a feature for automatically setting up a wireless network. To do this, go to the item "Quick Setup" and activate the "Wireless Network Setup Wizard". At the end, save the results. There may also be a WiFi tab. In it, just select "Enable".
WiFi network setup on ZyXel routers
In the assortment range of this brand, it is easy to choose an excellent WiFi router for an apartment. According to many users, these devices are characterized by reliability and high signal quality. However, sometimes there may be problems with the wireless network. Causes and solutions have already been described above. But in order for the user to know exactly where to correct the error in the settings, you should step by step follow the instructions below.
- The entrance to the settings is 192.168.1.1.
- In the interface that opens, select the “Internet” tab and check the type of connection.
- Go to "WiFi Network". There, check the parameters of the network standard, channels.
It is important to pay attention to the selected signal strength.