Laminate - a modern flooring that imitates tiles or parquet. The quality of the material is not worse than that of a natural parquet board, and in some cases even surpasses it. The coating repeats the texture and color of the solid wood with 90% accuracy. The operation of the laminate depends on the class of the material.
Over the past two years, the price of natural wood has jumped sharply, because the buyer is increasingly inclined to choose an alternative option - a less expensive, but high-quality laminate. Hence the question: how many squares are there in a pack of laminate, because it is difficult to determine by eye the necessary number of packages with goods for arranging the floor in the house.
Indicators determining the weight of packages with lamellas
Having opted for a laminate flooring, the buyer wonders: how many laminate in the package and how many packs of lamellas will have to be purchased to install the flooring in the bedroom or guest room.
Information about the number of boards in the package and the square of the laminate unit is readily available and is prescribed in the accompanying documentation. The number of products in the package differs depending on the manufacturer and is 6-9 pieces according to the standard.
In exceptional cases, packages contain up to 20 units of panels, but such packaging is rare. Because the number of products depends on how many squares in a pack of laminate.
To determine how much laminate is in the package (in m 2 ), it is enough to multiply the area of 1 unit of the product by the total number of lamellas in the package.
Parameters of lamella packages
The structural parameters, mass and parameters of the laminate determine how many squares are in a pack of laminate 33 (with a thickness of 12 mm). The linear dimensions of the panels for each manufacturer are different. This explains the differences in the number of products in one package. Therefore, information is useful not only about the covered area, but also about the number of panels in 1 package with a laminate.
The table below provides information on the parameters of the boards of selected collections of world laminate manufacturers sold on the Russian market.
Lamella width
To simulate the floor for ceramic tiles , a coating of 330 mm is used, under a natural tree - 190 mm. Narrow panels with a board width of 90 mm as closely as possible repeat the texture of the parquet. Although the greatest demand is for lamellas 185-195 mm wide.
Panel Length
The lengths of the boards are also different. Usually this indicator is maintained within 1260-1390 mm - this is the standard. If products with a length of up to 2000 mm are needed, an individual order can be made. Although this embodiment has some disadvantages: the complexity of installation work and sensitivity to roughnesses of the base under the laminate.
Laminate thickness
The average coating thickness is 6-12 mm, the optimum is 8 mm. Such options are not uncommon, but you can find them at any manufacturer of quality products.
Note that the greater the thickness of the board, the higher its characteristics, easier installation, warmer floor feel. For thick lamellas, standard deviations are minimal. Products are resistant to mechanical stress, which deserve positive feedback from customers.
Laminate Weight
How many squares in a pack of laminate 33 class, you already know. And how much will such a package consisting of 8 boards weigh? It all depends on the parameters of the lamellas and the manufacturer. The average weight of the package is 15.5-17.5 kg, which contains 2 m 2 of “floor” equal to 8 boards with a width of 160-185 mm and a length of just over 100 mm.
Laminate quadrature calculation according to technical characteristics
How many squares in a pack of laminate is easy to calculate, knowing the parameters of the products. This number will help determine the quadrature of the coating and suggest whether there is enough supplies purchased in the store to install a new floor in the room.
Admitting a mistake in the calculations, the master takes risks, because it is not always possible to find a variant identical to the shade of a previously purchased product from a new batch.
Therefore, even knowing how many squares are in a pack of laminate, experts advise taking another package in reserve. Without using the floor mounting cover, set aside the lamellas. They will come in handy when some of the boards become unusable or wear out too much.
Having all the records on the parameters of the laminate in your hands, you can easily calculate how many squares in 1 pack of laminate and how many lamellas will be spent on covering the floor area in the room where the repair is taking place.
How many laminate in 1 package
Claiming customers ask, “How many squares are there in a laminate?” On average, in a pack weighing 15-17 kg when packing 8 slats with a board width of 150-200 mm and a length of 1100-1200 mm, from 2 to 2.55 m 2 of flooring will be obtained.
You can learn about the exact weight of the package from the accompanying documentation or read the information on the end of the pack.
What to look for when buying?
When buying a product, be sure to pay attention to the parameters before calculating the quadrature, because each manufacturer adjusts the parameters of products at its discretion and, having missed such a small detail, you can make a mistake.
In addition to the accompanying documentation containing all the technical characteristics of the laminate, the manufacturer attaches to the product detailed instructions on how to work with lamellas and how to properly lay the laminate on the floor. Some manufacturers can even find in the package leaflet how much laminate is in the package.
Square laminate and its features
There is another modification of the lamellas - a square laminate. The product line includes Quick-StepArte and Quick-StepQuadra, with dimensions of 624x624 mm and 394x394, respectively.
Choosing such a coating, keep in mind that the parameters of each of the models result in rounding down. This nuance is often forgotten, and getting started, the material is often not enough. You should also consider the possibility of combining the picture with laminate panels from different parties.
Labeling details for laminate flooring packages
For 80% of manufacturers, such an indicator as the area of the material in the bundle can be found in the information on the bundle. Therefore, how many squares in a pack of laminate of class 32 can be found by just looking at the packaging of the goods. If there is no data, you can choose another simple option - ask the store about the certificate. It definitely has all the necessary data, specification, technical characteristics of the goods.
Features of coverage calculation
The work is carried out in stages:
- First, they calculate the floor area in the room where the floor will be laid. For this, it is necessary not only to multiply the length by the width, but also to take into account the design features of the future flooring and the subtleties of floor planning: indents from doorways, radiators, radiators, radiators and heating pipes, architectural elements in the form of arches, columns, etc.
- Prepare a drawing of the room where the repair work takes place, indicating all the details. So doing the calculations will be more convenient.
- Having calculated the floor area according to the formula, print the final number m 2 with a margin for trimming the laminate. Its volume is directly proportional to the selected lamella mounting scheme. Laying the floor at an angle of 90 ° or parallel to the window, the material consumption is 7%, with a diagonal flooring - at least 10%, when performing a patterned original scheme - from 25%. In any case, foreseeing how much material you lose will fail.
- In addition to the installation scheme, do not forget to calculate the loss of material at the joints between parquet boards or panels, the gaps between the lamella and the wall, cutting boards, rounding the volume of material.
A detailed calculation of the quadrature of the material using an example
It is possible to calculate the amount of materials correctly by the ratio of the floor area and the amount of necessary material of the selected brand from a particular manufacturer. Such an approach to the purchase of coatings will help to avoid additional costs for consumables and waste from the laminate.
By calculating the floor area and familiarizing yourself with the parameters of the laminate, you can easily calculate how many packs of lamellas you will need to install the floor covering. Consider an example.
Suppose a surface area of 100 m 2 . In 1 package - 8 slats, the total area of which is 2 m 2 . Divide S rooms into S products and get a number equal to 50 packs of panels or 400 laminated lamellas.
When making calculations, one should not forget about a separate percentage of material consumption, which depends on the layout. Suppose that the laminate is mounted at right angles, add another 7% of the total number of packages, and this is another 4 packs of laminate.
As a result, according to the conditions given in the example, 56 packs of laminate will be spent on arranging 100 square meters of the floor.
Now you know how many squares in a pack of laminate 32 (with a thickness of 8 mm), how to correctly calculate the sum of the coating area for different schemes of its installation.