Before talking about how to make gypsum plasterboard ceilings, it is necessary to talk about what this material is. Let's figure it out. Gypsum plasterboard is the most popular material intended for interior decoration of any premises in which a low level of humidity is noted. It can be used to organize partitions, slopes, as well as to align ceilings and walls. If you make a suspended ceiling from drywall, this will be a quick convenient way to get a flat surface. Before proceeding with the installation of such a system, it is necessary to clean the surface of old coatings, and the joints of the plates should not be putty, as the new ceiling will hide all these shortcomings.
How to make drywall ceilings
Before you begin fastening sheets of material, you should build a frame of the future design. First, you need to mark the perimeter on the wall, for which the hydraulic level is useful. Along the received line, the UD profile should be fixed. With a small area of the room, it is enough to insert several CD-profiles into it, which will be cut to size. Using self-tapping screws, sheets of material can be fixed on them. Such a technique is inappropriate in a room where the ceiling area is large enough, because due to the heavy load it can sag. If we talk about how to make a ceiling from drywall in this case, it is appropriate to note that the profile must be fixed to the ceiling through a certain distance by means of special suspensions. Level control can be done with a tense fishing line.
Other species
You can make a two-level ceiling made of drywall. To do this, you need to think in advance about the outlines of the future design. Patterns should be made of cardboard of the required shape, then to properly manufacture and fix the parts. Such ceilings look quite impressive, allowing you to create a unique interior. Such multi-level structures can be used in conjunction with suspended ceilings. If you are interested in how to make gypsum plasterboard ceilings in this case, you need to say that along the line that is marked on the first tier, you need to fix the radius profiles, which are made of ordinary profiles using metal scissors. To do this, you need to make cuts every couple of centimeters, and then bend the profile. It then needs to be fixed to the first level in those places where there are stiffeners, and after that, the installation of stiffeners is carried out similarly to the first level. The patterns can also be used to pattern elements from drywall, which then need to be fixed to the profile. Fastening is carried out using special screws with conical hats, which will allow them to hide in drywall.
If we talk about how to make gypsum plasterboard ceilings, it should be noted that after the construction of all the elements, it will be necessary to putty the surfaces in order to prepare everything for the final painting. On the perimeter of the room it is worth sticking ceiling polyurethane skirtings.