When laying ceramic tiles on the floor, check its appearance and caliber in advance. This is due to the fact that products of the same batch do not always coincide in all respects. In the process of getting acquainted with how to lay the tiles on the floor, pay attention to the necessary tools and materials. Their choice should be right, because this can affect the quality of the coating.
To work, you will need the following: ceramic tile for the floor, cutter, special glue, a saw designed for this material, gloves to protect against cuts, tape measure, level, pencil and primer. In addition, prepare a paddle and scraper with rubber nozzles, a cord, a water tank, a cloth and a sponge.
When we start repairs, many of us are interested in the question of how to lay tiles on the floor, because this process is not very simple and requires compliance with the installation technology. Initially prepare the foundation. Typically, this is a concrete coating, but there are often cases where the surface is the previous ceramic or vinyl floor tiles. To comply with the laying technology, first thoroughly clean the substrate, regardless of the coating option. Carefully monitor the coverage of the territory with which you have to work. Laying ceramic tiles is necessary in conditions of perfect visibility in order to accurately position each of the products. To do this, you can use lamps and spotlights with directional light.
How to lay tiles on the floor? First, its placement on the surface is considered. To do this, draw a mark in the middle of the room, and then draw a line with the help of the cord taken. Perform the same procedure on the other side. Received lines must cross each other. Then dismantle all the old skirting boards and door jambs. Lay out the tiles on the floor according to the lines drawn. Choose the most suitable location of the product so that you do not have to cut it, because it will look unaesthetic.
Glue must be applied from the center of the room, in one of the corners formed by the drawn lines. To apply the composition evenly, use a spatula and a spatula. If the glue is applied unevenly, the tile may crack, as its adhesion will be weakened. Press down the product slightly to firmly fix the composition at the base. Follow this procedure, moving along the line until the floor under the tile is completely closed. For proper measurement of seams, use special dividers. After the glue dries and hardens, grout them. The design of the seams should be correct, as this will improve the performance of the tile. Each area is cleaned with a scraper, and then a special mixture can be applied to the slots. Its excess is removed with a moistened sponge.
Having learned how to lay the tiles on the floor, pay attention to the fact that, as the final stage of work, it is polished with a dry cloth. This material does not require special care during operation, but be sure to monitor its condition.