The choice of the front door is a very responsible task. After all, it carries not only an aesthetic function, but also carefully stores all your values. In many door salons and supermarkets, the consumer is offered an unimaginable selection of front doors. They are made of various materials, have significant differences in design and exterior finish. Therefore, when finally the time comes to put an end to the long search and decide on the manufacturer and model, the final decision is given with great difficulty.
Criterias of choice
Each entrance door must certainly meet the following characteristics:
- Reliability: the design of the door leaf and frame, as well as the quality of the installation of door hardware should guarantee protection against burglary.
- High sound insulation: the door must reliably keep the secrets of the residents of the house or apartment.
- High-quality thermal insulation: the door must retain the heat of the interior, this is especially important if it leads directly to the open street space.
- The design of the door should provide for the possibility of inspecting the surrounding area.
- The front door is the first thing that guests see, so it should be beautiful and consistent with the overall interior design.
Only with full compliance with all these characteristics, the door will be bought and popular, and grateful owners will not be too lazy to leave a positive review to the manufacturer.
Responsible Manufacturer
It can be said with accuracy that the entrance doors of the “Profile Dors” fully meet all of the significant characteristics listed above. This factory began its work in 2002 with the production of components for door and furniture production. After 2 years, the first entrance doors of the Profile Dors saw the light.
More than 10 years have passed since then. All this time, the company's specialists worked on the development of the enterprise, product development. Close cooperation with colleagues from Italy and Germany, which took place during the installation and commissioning of new equipment, as well as in the selection of new European materials, greatly helped in this difficult matter.
Doors and doors again
At the moment, the factory does not only produce entrance doors. The production has successfully mastered several lines of high-quality interior doors. This is very convenient for potential buyers of factory products, as they have the opportunity to arrange all the doorways of their home in the same style.
In detail about the entry doors "Profile Dors"
Customer reviews have always called the company the best manufacturer of entrance doors in the Russian market. What is so pleased with the company's customers? What are the front doors of the Profile Dors?
Let's start with the boring technical information that is still necessary to understand the reliability and practicality of products:
- all Entrance Doors Profile doors are solid-curved with stiffeners for increased strength;
- metal thickness - 1.5 mm;
- profile thickness - 2 mm;
- hardware installation sites are reinforced with additional metal plates;
- attempts to penetrate into the room are prevented by anti-removable crossbars;
- the internal filling of the entrance doors is made with basalt plates.
Beauty and harmony
With regard to aesthetic characteristics, here the designers and constructors of the factory brought to life a very relevant idea: a patch panel can be installed on any front door, which repeats the design of any interior door produced by the factory. Thanks to this, the doors of the “Profile Dors” in the interior are not at all knocked out of the general ensemble of internal joinery.
Ideal for interior decoration
The company "Profile Dors" produces four lines of interior doors:
- X series - collet door leafs of collapsible design with polypropylene coating. Their main advantages are durability and the ability to repair or replace any part of the structure.
- Z series - frame doors made of solid pine and MDF with various options for internal filling. Their highlight is the aluminum edge framing the ends of the door leafs and giving the product greater strength and wear resistance.
- Series D - frame doors with a unique veneer sheet made in Germany. All products of this line are delivered in the maximum configuration, with factory tie-in and installation of first-class fittings of European manufacturers.
- The VG series, or high gloss, is a unique series of doors made in the best European design traditions. These doors feature a smooth, scratch-resistant surface that can reflect objects on a par with a mirror.
This is just a general summary. All the beauty and perfection of products can be appreciated only by seeing firsthand the "Dors Profile" interior doors. The photo of the model range in the catalog, unfortunately, will give only distant ideas about the quality of door panels.
Where can I buy
The factory successfully sells its products throughout Russia. Its own offices are located in Moscow, Novosibirsk, Samara and Tatarstan. In other regions, an extensive dealer network implements the “Profile Dors” doors. Feedback on the work of the company's partners is always positive.
In neighboring countries - Belarus and Kazakhstan - you can also buy Profile Dors doors. Minsk is represented by the Yurkas company. And in the city of Almaty has opened its own representative office of the manufacturer.
In conclusion, I would like to emphasize once again that Profile Dors is a reliable, experienced manufacturing company whose capabilities are time-tested.