What you need to know when making baby beds made of wood with your own hands

Not always there is a desire to spend money on the purchase of certain furniture. But this is not necessary. After all, you can do something yourself. In the modern world, with such a variety of tools and materials, it will not be difficult to make children's beds from natural wood.

What is required to design a bed

To assemble the crib you will need the following:

1. Side boards. They need 4 bars and 18 round posts. Through bars on the front side, it is necessary to make through holes so that all parts can be bolted together.
2. To assemble wooden beds with your own hands, you will need an end board. For it, you need 14 bars of various sizes and 12 round columns, 4 of which should be a little narrower.
3. Bottom. For the bottom you need 2 wide thick bars, 4 bars thinner, half the size of the previous ones, 1 sheet of plywood.
4. To assemble beds of wood with your own hands without fasteners will not work. You will need 8 countersunk bolts, nuts, washers, 4 legs that can be unscrewed from unnecessary old furniture.

In order to make wooden beds with your own hands, you will need the following tools: a hacksaw for metal, a flat surface, stationery, tape measure, angles, a screwdriver, pliers, a drill.

Let's start the assembly. Knowing the algorithm of work, you will be able to continue to assemble beds from wood with your own hands. You should immediately pay attention to the fact that the parts are attached to each other by corners, and not by bolts. In the bars we drill through holes and insert them into each other, fixing with glue. When sawing, it is necessary to strictly observe the dimensions so that the bottom panel of the bed matches the width of the mattress. The legs for the bed, if there are ready, we put on glue. You can also make supports yourself. To do this, cut a wooden beam into equal parts. In addition, to make a crib, we purchase a mattress corresponding to the size of the bottom panel, or we adjust the old one to the required parameters. After that, we attach the legs to the transverse side panels. To do this, leave gaps of 1.5 cm throughout the main panel of the bed, so that you can then fix the supporting bars. After that, we attach the legs to the furniture we assemble, and also install the longitudinal part of the bed. Next, we fix the base for the hinge and install the hinge itself. For the base of the bed, it is recommended to choose plywood, as it is a light and sufficiently durable material.

What can I say in conclusion

A homemade bed made of wood can not only save money, but also stores a piece of the master himself. In addition, making a bed is a creative process, and after assembly, you can do its design, which will give it even more uniqueness. In any case, you yourself choose the way to create a bed. You can do it yourself, or you can order from professionals. And if you chose the first option, then good luck in creating such a wonderful piece of furniture!