Epilator is a convenient device for performing home procedures. The device removes hairs from the root, and the skin becomes soft and smooth. But work with the device has its own characteristics that need to be considered. How to use the epilator, described in the article.
Principle of operation
An epilator is a device that has built-in metal discs or tweezers. When the device is connected to the network, the parts begin to rotate and grab the hair, eliminating it from the root. In almost all modern devices, the rotation speed can be adjusted. It is necessary to take into account pain and the result that you want to get.
The first epilators were designed to remove excess hairs in the legs and armpits. Later they began to produce devices with nozzles that can be used for the intimate area and face. Depending on the nozzles, hairs with bulbs can be eliminated, as well as a massage. It accelerates blood circulation, and therefore the procedure will not be so painful.
At some manufacturers, the devices are equipped with a cooling function, which “freezes” the skin a little, preventing the appearance of severe pain. The latest devices are ideal for everyone, and the pain threshold and the amount of hair on the body does not matter. If desired, the tool can be used for the back, abdomen, chest, shoulders, armpits, legs, bikini area. How to use the Brown epilator or any other brand of appliance is described below. If you follow the established rules, the procedure will be effective and safe.
Advantages and disadvantages
How to use the epilator is usually written in the instructions. The advantages of such devices include the following qualities:
- The procedure can be performed independently.
- Ease of use, storage and cleaning.
- No extra fixtures needed.
- The hairs are removed with the root.
- The result remains for a long time (3-4 weeks).
- Affordable price.
Of the minuses distinguish:
- Loud work (but not every device).
- The duration of the process (compared with depilation).
- Soreness.
Why is it necessary to use an epilator
As you know, shaving with a machine does not allow to eliminate hairs with a root. Only the upper part, towering above the skin, is cut with a blade. In this case, the bulb will be inside, and new vegetation occurs after 2-3 days. The epilator does not have this feature, its main purpose is to remove hairs with a bulb, the skin remains smooth for 3-4 weeks.
How to use the epilator for the first time? To perform the procedure with such a device does not need any special skills. The device is convenient to use, so everything can be done independently. For the procedure, no additional devices are needed, all that is required is the epilator itself.
Features of use
Considering the question of how to use the epilator, you should consider some features of the use of this device. They are as follows:
- Speed. The device has a lever with which you can adjust the speed of rotation of the discs or tweezers. At low power, it is necessary to eliminate hard and short hairs, since due to strong rotation they will break, and the root will be inside. If the device is used for the first time, then there will be painful sensations, especially at a low speed. But you should not increase the power, because this move reduces the processing efficiency. After a specific period of time, the skin will get used to the loads, hair removal will be quick and painless. Only then can you increase the speed, since the hairs will be thinner, so it will be easier to remove them.
- Length. When using the machine, you can not grow dense vegetation on the legs, armpits and in the bikini area. You need to steam the skin, and then remove the vegetation. With the epilator, this is impossible, it will take 2-3 days to endure until the stumps grow to 0.4-0.5 cm. To eliminate hairs with root, the forceps grab them whole.
- Technics. The device must be conducted against the growth of hairs, otherwise there is a risk that the device will be held several times, which increases pain. Hold the device at an angle to the side to which the movement occurs. Do not remove hair with strong pressure on the skin of the epilator. Lead the tool slowly and smoothly.
- Steaming. The downside of the device is soreness. To minimize discomfort, the skin must be steamed before the procedure. You should take a hot bath with the addition of sea salt and essential oils. A hot shower will do.
How to use the epilator may depend on the zones treated. Therefore, you need to familiarize yourself with the rules of work on each specific area of the body.
Laser epilator
How to use a laser epilator? Before use, read the instructions. The device should be tried on a small area of the body to eliminate allergies and irritation. Perform epilation on dry and clean skin when the hairs of the industry are 2 mm or more.
Terms of use are as follows:
- You must turn on the device.
- Then it is placed close to the skin. Effectively removing the hairs will allow the correct exposure angle. One light flash can cover 3 cm 2 .
- Then the device is placed on another site.
- If the length of the hairs is more than 3 mm, then they need to be shaved off, slightly grown and only after that perform epilation.
Hair does not fall out immediately, but within two days after the procedure. Before the session, do not apply cosmetics.
Legs
The most sensitive area is the place under the knees and ankles. Other parts get used to the procedure quickly, so there will be no severe pain in the future. It is most difficult to perform hair removal for the first 3-5 minutes, and then the discomfort disappears. Due to the fact that the legs have a large and even surface, the session is quite simple. It will last 30-45 minutes.
How to use the epilator to treat legs? First you need to prepare - steam the skin by taking a bath, and then apply a scrub from coffee grounds. This event helps to remove dead skin particles and remove ingrown hairs. Then you need to disperse the blood with a hard washcloth, each leg should be rubbed for three minutes.
All manipulations are performed 45-60 minutes before the procedure. After exiting the bathroom, wipe the skin and massage, which consists in rubbing, patting and pinching. After preparation, the device must be turned on (at low speed) and you can begin to remove vegetation, carry out movements against the growth of hairs.
Bikini zone
This part is the most sensitive. There are many pain receptors in this place, so there will be discomfort. It is advisable to perform the procedure with a special spray / gel, which contains lidocaine.
You can use a special cooling mitten, which is sold in cosmetic stores. Pain-sensitive women use painkillers before treatment with the device. Before using the epilator in the bikini area, you need to remove the hair with tweezers from the inside of the thigh. Then the skin is treated with alcohol, vodka or an antiseptic to protect against infection.
After that, you can work with an epilator, and then you need to prepare a decoction of chamomile. A cosmetic swab is moistened in it and the skin is wiped with it. The procedure helps relieve irritation and inflammation.
Armpits
How to use the Philips epilator for armpits? Although this part of the body is small in area, it requires a special approach. The hairs are in the cavity, so when you epilate you need to pull the skin. To properly perform the procedure and minimize discomfort, it is necessary to stretch the epidermis at the moment when you lead the epilator on the skin surface.
If the hairs are very long, then they should be cut to 0.5 cm. Otherwise, the pain will be 2 times stronger. After the session, you need to treat the skin with cosmetic ice with a decoction of chamomile, and then apply a healing cream or lotion. Do not use deodorant for the next six hours.
Face
How to use the “Roventa” epilator on the face? Standard devices are not suitable for this. When removing facial hair with a classic instrument, the skin is injured. This can cause irritation and rash. Many manufacturers produce devices specifically for the face.
Before the session, the skin must be cleaned. It is preferable to perform a peeling to remove dead skin particles. It is important that there are no rashes or irritations on the face. If they are, then it is advisable to postpone the procedure. Position the device perpendicular to the body. Movement should be against the growth of hairs. This will eliminate their ingrowth and inflammation.
Pain reduction
Often the procedure goes with discomfort. But there are recommendations to reduce pain:
- You can use coolants: anesthetic lotions, special gloves. Suitable ice cubes, cold water. If the skin is very sensitive, then opt for waterproof devices to remove vegetation using special foams and gels.
- It is undesirable to process large areas immediately. The procedure must be performed without haste.
- First turn on the device at low speed, it is advisable to start from the first and gradually increase. Gradually, the follicles will weaken, the skin will get used to the procedure, and the process will become less painful.
- Shaving nozzles should be used with lotions, creams or gels that improve gliding. This will protect against irritation.
- You can soothe the skin with a cooling pad or special cosmetics.
For sensitive epidermis, especially for the deep bikini zone, you can purchase a delicate nozzle. The size of this device is smaller, the speed will be lower, which reduces pain. A correctly performed procedure eliminates the appearance of allergies and irritation.