In the modern world, it is not so difficult to create some kind of high-tech equipment, which is assembled at the plants with your own hands. Many people are able to make the most diverse and interesting devices with their own hands. The main thing is to know what parts this or that device consists of. It is also important to understand the principles of work. So you can assemble a mobile phone, a washing machine or even a car. Of course, we can talk about the electronic cigarette. "How to make an electronic cigarette?" - The question is not so complicated. In this article we will deal with this. If someone does not want to create an electronic cigarette with their own hands, perhaps this article will help him repair electronic cigarettes.
Main components
In an electronic cigarette, there are several parts responsible for its device. The main components can be called a microchip, a removable cartridge, an atomizer, and a battery. You can purchase these parts in free sale both in ordinary stores and in the Internet space.
In addition, there is a need to buy the case itself. Of course, you can do it yourself, but if you buy a case that is manufactured at the factory, then the probability of breakdown of such a thing as a homemade electronic cigarette will be minimal, and it will look very nice.
A few words about the atomizer
Many beginners who smoke electronic cigarettes wonder: "What is an atomizer?" At its core, it is an electronic cigarette vaporizer. A special liquid is heated (previously it is in the electronic cigarette itself) immediately to the state of evaporation. This happens as follows: refueling is fed through the cartridge to the electronic cigarette vaporizer itself, i.e. an atomizer. There, a heating process takes place, which is performed using a nichrome spiral.
In addition, directly besides the nichrome spiral in the atomizer-atomizer itself, there is a wick, metal, as well as a ceramic cup. The liquid passes to the wick, and from it - directly to the nichrome spiral, which is placed in a cup made of ceramic.
Build Components
Based on this, we will need to assemble such a thing as a home-made electronic cigarette, a nichrome thread, a battery case (you can use a flashlight), a wick, and for it it is best to use a silica thread. In addition, you need a case for the atomizer and, in addition, a lithium-ion battery, which has a protective board with a voltage of 3.7 Volts. Thus, an electronic cigarette with its own hands is assembled from a very small number of parts.
How to make an electronic cigarette?
When wondering how to make an electronic cigarette with your own hands, smokers should refer to the instructions. Let’s bring it here.
In this case, the main direct engine of energy in a homemade electronic cigarette should be the battery. Most often, this part is located in the completely opposite side of the cartridge. A microchip should be installed behind the battery.
It connects the battery and atomizer device itself. But it is important to firmly attach the cartridge to the atomizer. As soon as the puff takes place, in theory, the battery begins to supply the atomizer with its energy, and as a result, heat it up. As a result of this, the pre-charged liquid will evaporate. What is needed to ensure that this process is provided in a homemade electronic cigarette?
To do this, it is necessary to connect the positive and negative contacts of the battery with suitable screws in the case of the atomizer itself, onto which, subsequently, wrap a nichrome thread-wire. Also, you need to install a wick on it. In the case of your purchased atomizer, you need to make a small hole. This opening should be used for air intake. As a result of all this work, the liquid should fall onto the spiral, which will evaporate, and then be inhaled as from a regular cigarette.
Making a homemade case
In order for your homemade electronic cigarette to look pretty enough, you will also need to make a case with your own hands. As mentioned above, you could buy it in a store, but you can make it yourself.
Cut a cardboard tube. The cut should extend along its entire length. Now set the diameter of your tube. It should be such that the batteries can be inserted without much effort. Then set the length of the suitable batteries, and then draw a loop from the bottom of the wire and tightly fasten it to the bend with a bracket or glue. In conclusion, you need to wrap the upper part of the tube with an elastic band.
You can insert a battery into the handset. To it, you connected the wire from the very beginning so that the minus point down. The wire itself must be installed in a special way. Its clip should protrude from the top of the cardboard flask. You can fix the clip using an elastic band. Install the remaining batteries in the case in the same order as the first one.
Where to find the fluid?
In order to create such a thing as a full-fledged electronic cigarette, with your own hands, you will also need liquid for your device. It will be necessary for this to acquire a special basis for refueling. The composition of this mixture includes: propylene glycol, which, if desired, can replace vegetable glycerin, distilled water. If the owner of the device is interested, then nicotine can also be part of the liquid, but a home-made electronic cigarette, like a real one, allows a person to smoke without using nicotine, or using it to a minimum.
In stores you can find a large assortment of flavors to choose from. Of course, for this you will need a specialized store, which is extremely convenient to find on the Internet if it is not in your hometown. With the help of aromas, the smoker is given the opportunity to create his own recipes for electronic cigarettes, changing the proportions of certain components, mixing the liquid in those options that, in fact, are preferred by the cigarette owner.
Benefits and Cautions
The main advantages of electronic cigarettes are that there are no tar and carcinogens there, as well as the fact that the cigarette does not burn when smoking, without emitting about four thousand chemical compounds and not being a fire hazard. In addition, it does not pollute the environment, operates in a wide range of temperatures, and the temperature of the smoke itself is close to that of the human body.
An electronic device uses an electromagnetic screen, and therefore does not produce any kind of electromagnetic radiation. In addition, as mentioned above, there is very little nicotine in it, which harms people. In each of the liquid containers, there are less than 20 of the most common cigarettes.
It is extremely important to remember that even electronic cigarettes are by no means suitable for children under 18 years of age, as well as people who do not have a smoking habit. In addition, if a person is allergic to nicotine or any of the direct components of an aerosol, he should also not use this device.