Imitation brick for interior decoration - an interesting design decision. It can be used for the whole room, and to highlight any zones, walls. Many people ask: "How to do this, do not expose the walls to masonry?"
And they are not always built of brick. There are a lot of options for the materials themselves and ways to make a variety of tools at hand. Two large groups can be distinguished: imitation of brick for interior decoration using purchased materials and do-it-yourself DIY tools. It is worthwhile to analyze this topic in more detail.
Preparatory work
This stage will be the same for all types of finishing materials, with the exception of PVC and MDF panels.
- Remove old material.
- Putty the deep flaws on the wall.
- Prime the surface.
- If necessary, plaster the walls to a level state. Sand, primer.
Wallpaper
This type of material is the easiest way to translate such a design decision. For this finish it is important:
- Flat base. There should be no waves, deep flaws and bulges.
- Compliance with pasting technology. So that as a result, at the joints of the canvases there are no gaps.
But the fact is that even vinyl thick wallpapers will not create the fullness of the feeling of natural masonry. As can be seen in the photographs, a more or less real imitation of a brick for interior decoration is achieved using 3D wallpapers.
The remaining species, unfortunately, do not visually convey the masonry texture.
PVC panels
An interesting solution for rooms with high humidity and aggressive environments. This type of material is easy to maintain, wear-resistant, communications can be hidden behind its design. Where is better to use? Imitation of brick for the interior decoration of the kitchen will add a twist, will help to get away from standard solutions in the design of this room. In the photo you can see one of these use cases.
Stages of the work:
- As such, the preparation of the base does not require this type of cladding.
- A frame for panels is assembled around the perimeter with the help of guide and rack profiles. Since the finishing material is lightweight, a rigid skeleton is not required. Unless it is planned to insulate the walls.
- Further along the perimeter, a starting plastic profile is attached, if it is not planned to cover the perimeter of the walls with other decorative elements. It is better to use corners, profiles, plinths to match the color of the main material, then imitation under a brick for interior decoration will achieve a greater effect.
- The most crucial moment is the docking of the panels. It should be as tight as possible to make the canvas, so as not to form a gap between them.
Two minuses should be distinguished:
- At a certain angle of illumination, the joints between the canvases can be viewed.
- Plastic can not be attributed to natural materials.
As can be seen in the photo, the panels can be textured and look quite realistic.
Where else can such imitation bricks be used for interior decoration? Plastic can show itself well when used in the bathroom, toilet, corridor. For such premises, it will be ideal. Firstly, it does not absorb water, and secondly, it is easily washed from any types of pollution.
Brick tile
Imitation of brick for interior decoration with this option is one of the most popular.
This material will create the most realistic kind of brickwork. Clinker tiles are usually produced in canvases on which several rows of bricks are “laid out”. This simplifies and speeds up the cladding process. Mounting Method:
- The base should be more or less even primed.
- Glue is mixed. First applied to the base. Usually no more than one square meter is treated at a time. Next - to the tile. Laying lead from the bottom up. Work must be carried out with level control. It is impossible to choose the perfect tile size for the wall, so you can not do without cutting.
- After the surface dries, grout the seams.
This type of cladding is used as part of the decor. They are used in the interior of living rooms, corridors.
Very often used for facades. This is one of the most realistic types of brickwork.
Ceramic tile
This material is lighter than the previous version, but also difficult in the installation process.
It is better to choose plates with imitation of several bricks. This will facilitate and speed up the cladding process. The principle of operation is similar to the previous version. It can be noted that the facing is a complex type of finish and it is better to trust a professional. But if you still want to do it yourself, then you should follow the masonry technology. No need to rush - observe the dimensions of the seams.
Such imitation under a brick for interior decoration of a bathroom , toilet, kitchen will be an excellent solution, because it can withstand direct water, is easy to clean from any contaminants. The presented photos show several design ideas for the design of these rooms.
Gypsum tile
This option should be noted separately, because it is possible to make such a facing not only by purchasing the finished material, but also by making it yourself. This will require: gypsum plaster / putty, a box for the size of a brick. It should be noted that the most popular imitation of brick for interior decoration is in the form of a spoon masonry. Dimensions spoon standard brick 65 x 250 mm. That is, the capacity must be selected either the same size or close to it. The process itself is simple:
- Knead the solution, pour into the mold. Kneading should be done in one portion, because it has the property of quickly hardening.
- Wait for the solution to set completely. Pull out.
Advice
Of course, the production process will accelerate if there are several tanks. You can add dyes immediately to the gypsum solution or paint the finished surface. After the plates are ready, they are glued in the same way as the previous two options. After solidification, stain with the desired color. For greater realism, you can shade the bumps. Seams are also stained with simulated masonry mortar. Or simply left unpainted, depending on the solution used for facing.
Plaster and putty imitation
This type can quite imitate brickwork, if the work is done correctly.
A layer of plaster or putty is applied to the wall, a short time is given for drying, and then a masonry pattern is extruded with a finger or the back of the spatula.
For this option, the applied layer should not be carefully aligned.
Roughness of the surface will create a more realistic imitation. Another caveat - to apply plaster in large areas is not worth it. The solution can dry quickly and drawing a drawing will be difficult.
After finishing work, the layer should dry. And then paint is applied to the desired shade. Roughnesses can be tinted.
Do-it-yourself brick imitation
You can highlight a number of options available for in-house production:
- Paint. The cheapest and easiest option. To do this, you need paint to match the color of the facing brick. Preparing a stencil for masonry. You can use cardboard, plastic - to whom it is more convenient. And then the wall is painted over, dries up and a pattern of seams is applied over the screen with a different color through the stencil. This close view is not very similar to the original, but from a distance it looks believable. It can be used, for example, for the design of balconies.
- Another budget option. Cut bricks from thick cardboard (packaging material can be used). Stick to the wall, leaving gaps for the seams. Then glue the entire plane with a napkin, first crumple it, then straighten it. This will help the surface to give texture. And finally paint over. For this type of finish, you can use fine-grained foam, cork substrate.
What does imitation brick look like for interior decoration? The photos presented in our article give the answer in detail. Based on this article, you can pick up an interesting design solution for home decoration.
As for the choice of material for decoration - this is an individual decision. The only advice: before purchasing, you should definitely get acquainted with the characteristics and properties of the material. And then make a purchasing decision.