The HP LaserJet 1020 Laser Printer is great for small on-premises printing systems. In the future, its technical characteristics will be examined in detail, reviews are given, and the setup procedure is described.
What market segment is the printer targeting? Delivery List
Today, HP LaserJet 1020 belongs to budget solutions . A similar positioning of the model in question is indicated by its cost and modest technical parameters. It is most optimal to use such a peripheral device in a small, compact office. But it is also quite acceptable to use it at home or in the multiplier center.
The following delivery list boasts this solution:
- Economy laser printer.
- User's manual.
- Interface cord.
- Starter cartridge.
- Warranty card.
- A disk with drivers, documentation and a set of diagnostic programs.
- Power cord
Main settings
The HP LaserJet 1020 printer hardware platform is an ARM microprocessor with a nominal clock frequency of 234 MHz. The amount of memory for storing information is 2 MB. The main page format for this device is A4. The paper weight can be from 60 to 160 g / m 2 .
The resolution of the output pages is only 600x600, and this circumstance significantly affects the print quality. The page speed set by the manufacturer at around 14 pieces per minute. The print limit for such a solution is 5,000 sheets per calendar month.
The cartridge at one gas station is able to bring out only 2000 pieces. The number of possible ways to connect to a computer consists of only 1 USB port. In standby mode, the power of this solution is 2 watts, and when printing, it increases to 250 watts. The noise level during the operation of this peripheral system does not exceed 62 dB.
Setting procedure
The procedure for connecting and setting up the HP LaserJet 1020 is very, very simple. He is capable of even novice specialists with a low level of training. When implementing it, you must perform the following sequence of actions:
- Dismantling of transport packaging. Extract all delivery items from it.
- Installing the printer on a computer table in the closest proximity to the PC system unit. The maximum range of the installation location is limited by the length of the interface cord.
- The next step is to install the cartridge.
- Next, a connection is made, which consists of two stages. One of them is the supply of a power cable. And the second is connecting a computer interface cord.
- Then you need to turn on the PC and printer. The first one should fully boot.
- Then you need to install the full set of software from the disk.
- Upon completion of the installation of the application software, it is recommended to perform a complete reboot of the PC. Next, a test sample page is printed.
At the end of this operation, the device in question will be ready for use. If printing fails, additional diagnostics must be performed and the cause of the malfunction corrected.
Reviews Conclusion
The HP LaserJet 1020 printing system has a number of advantages. The feedback from most owners of such a printer is as follows:
- High performance.
- Profitability.
- Reliability.
- Easy operation and, of course, settings.
- Availability.
There are also disadvantages in the HP LaserJet 1020, which include:
- Low quality of output documentation.
- The minimum set of interfaces.
- Increased noise during operation.
As a result, it can be noted that such a printer is perfect for use in a small office room. But also it can be successfully applied in the copy center. Another possible area of use for this solution is the house. In other cases, the technical parameters will not be enough.