According to the nomenclature of the manufacturer, Kyocera FS-1120D is a mid-level laser printer. A similar affiliation is indicated by a monthly print resource increased to 20,000 pages and high speed. It is about this peripheral device that will be discussed later.
Device positioning and what is included in the delivery list
As already noted, Kyocera FS-1120D belongs to the printing solutions of the middle class. It is based on the laser printing method, which allows it to output up to 20,000 pages per month. At the same time, the speed of this printer is quite high. Therefore, the main area of use of such a printing subsystem is a mid-level office. But it is also quite successfully possible to apply it in a copy or duplication center. The delivery list includes the following components:
- Laser printer.
- A disk with software.
- Warranty card.
- Power cord
- Starter cartridge.
- User's manual.
- Computer interface wire.
Main settings
The presence of fairly good parameters of the technical plan boasts a printing subsystem Kyocera FS-1120D. The main size of the medium on which such a device can output information is A4. In this case, the resolution will be 1200x1200. Of course, for obtaining high-quality monochromatic images this value is not enough, but for obtaining high-quality text, tables or diagrams this will be quite enough. The speed of the device is 30 black and white sheets per minute. This printer needs 19 seconds to warm up, and 6 seconds to print the first page. That is, the first media on it appears 25 seconds after the start of printing. Only USB is used to connect to a PC, but there is also a card reader from which various documents can also be output. The hardware basis of this solution is the PowerPC model 405F5 microprocessor with a nominal frequency of 360 MHz. The buffer volume in this device is 32 MB. Among other features of the device can be noted the presence of support for duplex printing in automatic mode. The last option is most in demand in office environments.
Cartridge
TK-160 is the main cartridge of Kyocera FS-1120D. It is capable of displaying up to 2500 pages at one gas station. At the same time, the peripheral device in question, as noted earlier, can output up to 20,000 pages. Therefore, the cartridge will have to be refilled about eight times a month. Resource drum is 100 thousand pages. That is, in the most intensive mode, he will be able to stretch about five months. After that, you will have to buy a new cartridge.
Setting procedure
To configure any Kyocera printer, you must complete the following steps:
- Unpack the cardboard box for transporting the printing system. We fully remove the entire scope of delivery.
- We install a peripheral device as close to the PC as possible.
- We carry out all the necessary connections. One wire leads to the power supply system, and the second to the computer.
- Then install the cartridge.
- Next, turn on the PC and wait for the end of the system software boot process.
- Then we turn on the printing subsystem.
- After this, the drivers should be installed in automatic mode. If this does not happen, then from the CD-ROM we force-install the application software.
- Test page output /
Conclusion
Indeed, the technical parameters and characteristics of the Kyocera FS-1120D do not cause any significant complaints. For its niche, this is a great solution, which is devoid of significant shortcomings. In addition to this, the manufacturer in this device has implemented the function of automatic printing on both sides of the page. Also, the cost of maintaining such a system is minimized. The result is a laser printer with the perfect combination of parameters and specifications.