“Bustilat” is a synthetic universal construction adhesive, which is intended for gluing wallpapers, carpets, fiberboard, particleboard, asbestos-cement and wood-fiber boards, ceramic and polymer tiles, linoleum. Bustilat glue allows you to easily connect walls, floors and ceilings with decorative elements and at the same time not spoil them with unnecessary holes. The adhesive is for internal use only.
Structure
Bustilat glue consists of vinyl latex, chalk, thickener, modified cellulose, water, preservative and other special additives. Bustilate looks like a grayish-white mass with a creamy consistency.
Glue varieties
In addition to traditional glue, which is still familiar to our parents, today many of its advanced varieties are produced, which differ in their properties. They have different frost resistance, heat resistance, moisture resistance, etc.
So, we will consider glue "Bustilat", application and varieties.
- "Omega bustilate" is used, as a rule, for floor coverings or wall decoration with materials that have a fabric, felt or pile basis. It is also used for carpet, textile wallpaper, etc. In addition, it is suitable for materials made on paper basis. However, it has a rather poor adhesion to poorly absorbent PVC products, as well as enameled metal, etc. This adhesive is also used for gluing dropped tiles or wood products. It has the property not to soak through fabric materials, due to which spots do not appear on the other hand.
- Bustilat-M. It has good adhesion to many types of materials for walls, floors and floors. These include concrete, brickwork, plaster, putty, whitewash, wood, drywall and ceramics. Its composition includes frost-resistant additives. It is designed for gluing carpets, linoleum, various types of tiles, wallpaper. It is also used as a primer.
- Bustilate-N. This glue is characterized by enhanced adhesion. It is used for fixing materials that are difficult to stick to. These include heavy roll wallpaper (non-woven or glass), linoleum without a backing, synthetic carpets, etc. The glue does not lose its adhesive ability during structural deformation, since it is quite flexible even after hardening.
- "Bustilate-D-super." There are several varieties of it. Used for bonding polymer materials having a smooth surface. This glue is not toxic, not combustible. Used for fixing wallpaper, baseless vinyl linoleum. It does not allow the development of fungus, mold, or any other biological microorganisms. However, at the same time it does not have a harmful effect on human health. Glue "Bustilat" refers to an economical option for repair work and is a good enough substitute for some more expensive imported materials.
- Bustilat Suite. It is used for fastening polymeric materials such as polyvinyl chloride film, linoleum, etc.
Clay "Bustilat". Application
Any kind of glue must be used in accordance with the instructions.
Instructions for using the adhesive are fairly simple and straightforward. It is attached by the manufacturer to each package of glue for the convenience of buyers of this product.
Surface preparation
The treated surface is pre-cleaned of dirt and dust, existing traces of old material. Then it is leveled, plastered and cleaned to a smooth state.
Porous surfaces are treated with a special primer, in order to improve adhesion, as well as preventing the appearance of mold and various fungi.
Glue application
Before you start using the glue, it is thoroughly mixed.
Bustilate glue is applied to linoleum and wallpaper quite simply. First of all, the material is measured and cut into pieces of appropriate sizes.
Using a brush or roller, the substance is applied to both surfaces.
After waiting about 10 minutes until the glue dries a little, combine the material with the surface and presses for 24 hours. It is very important to remove all air bubbles from under it, using a dry towel or a special plastic spatula.
After the work is completed, it is necessary to protect the room from drafts for a day.
Clay "Bustilat". Characteristics
The mass of glue in its working condition is white or grayish. After it dries, it becomes transparent. It has no characteristic odor. It does not appear as yellow spots even through the thinnest material.
Refers to a tear-resistant, environmentally friendly and fireproof adhesive.
Glue "Bustilat", the consumption of which is quite low, is quite economical. For 1 square. a meter in one layer will need from 80 to 250 g.
Complete drying at t = + 20 C occurs in 1-1.5 days.
Due to the large life cycle allows you to fix small flaws.
Its composition does not contain alcohol, so it is not a combustible glue, which is not afraid of open fire.
The composition includes water, so when it freezes, it freezes. For this reason, it is used only in heated rooms or in the warm season. After drying, the cold is not afraid.
Despite its versatility, Bustilat glue is mainly used for wallpaper. This adhesive was used in Soviet times and as before is not inferior to its position. Everyone knows that with proper repair, the material can last for a long time. For this reason, many still continue to trust the time-tested glue, which also has a much lower cost than any analogues.
Bustilat glue, the characteristics of which are indicated above, has very good adhesion, low price, it has no smell at all, it is non-toxic.
Precautionary measures
Since this synthetic substance is made on the basis of chemical compounds, it is very important to follow certain precautions when working with it (especially in cases where the use of glue is regular). Gloves made of polymeric materials should always be worn when performing work, and the work room should be well ventilated. In case of contact with eyes, rinse thoroughly with clean running water.
Packaging
Bustilat glue is packaged in plastic containers weighing from 1 kg, as well as in plastic buckets of 18 kg each.
Storage
Bustilat glue is stored in a hermetically sealed container and in a place protected from high temperature.
For this substance it is permissible during transportation and storage to repeatedly freeze (up to 5 times) with its further thawing at room temperature.
Before use, the substance is thoroughly mixed.
The shelf life in the factory sealed packaging at an ambient temperature of + 5-20 degrees C is 12 months from the date of manufacture.