Anchor bracket for underfloor heating: features of use

Underfloor heating is a functional and efficient source of heat, which in our time has become very popular. Despite the fact that more recently this system was considered one of the most expensive, today everyone can afford not to freeze in the cold season. To create a contour of a warm floor covering, it is necessary to qualitatively and reliably attach the pipes to the base. To do this, use a variety of fasteners, such as: harpoon, elongated anchor brackets for underfloor heating or mounting tape. The choice of fastening depends on the material from which the base is made. How to choose the fixation option and not make a mistake in the choice, read on.

Why do I need a warm floor

Before you familiarize yourself with anchor brackets for a warm floor, you need to know what a warm floor is and why it is needed.

Despite the high prices and certain difficulties, underfloor heating is an excellent alternative to radiator heating, which is easy to install with your own hands.

This allows you to create a completely different heat flow. The system also has a completely different temperature control, which allows you to warm up a fairly large area. This is a great option, especially for large rooms. Therefore, a warm water floor is becoming more and more popular every year. At the same time, the popularity of fasteners, such as anchor brackets, without which a high-quality arrangement of a floor heating system would be unrealistic, is growing.

Product Features

Anchor brackets for a warm floor, or, as they are also called, clips, perfectly fix pipes around the entire perimeter in horizontal sections, during bends and turns. Staples must be placed at a certain distance from each other, in increments of about fifty centimeters. On bends and turns, the interval decreases to ten centimeters. This will fix the pipe even more reliably.

For the manufacture of staples, shockproof material of special purpose is used. The brackets have a special spacer for clamping pipes and teeth for a tight fit. After the pipe snaps into place with brackets, it is impossible to release them by hand.

The process of installing fasteners in the form of brackets

Among all the known mounting options, the most interesting is the use of an anchor bracket for a warm floor of 16 mm. The installation process using this mount provides for several stages and a certain sequence.

The installation scheme of the heated floor on polystyrene plates is as follows:

1. Before starting work, the base must be cleaned of dust and various other contaminants.
2. Carefully inspect the surface for bumps. If there are differences on the basis, they must be aligned.
3. Next, we lay a plastic film, which will play the role of a waterproofing layer. All layers must be overlapped, going to the walls, fastening together with tape.
4. Over the entire surface we lay an edge tape.
5. The next step involves laying polystyrene mats. It is better to stack them with a slight displacement and fasten together with special locks.
6. To form a contour, markings should be made on the mats.
7. We take anchor brackets for the warm floor and fix the pipes with them.
8. The final stage is the coating of gypsum sheets in two layers of laid and fixed pipes.

Other mounting options for underfloor heating

In addition to anchors for underfloor heating, there are other ways to fix pipes. It all depends on the basis:

1. Mats with bosses do not require the use of additional fasteners. Differ in easy installation, simplicity of fastening and the increased heat-insulating properties.
2. Reinforcing mesh, for laying pipes on which plastic and metal clamps are most often used. This makes the construction sturdy and reliable.
3. To install the tubes on a foam base, use anchor brackets.
4. In cases of mounting a heated floor on a concrete base, perforated tapes cannot be dispensed with.
5. To heat a wooden floor, it is necessary to use a wooden module as fasteners for pipes.

Making a warm floor yourself is quite simple. Despite the mass of methods of arrangement, the main thing is to follow certain rules and technologies, as well as take into account the nuances.

Using anchor brackets for underfloor heating pipes for installation allows this process to be carried out without any difficulties, quickly and imperceptibly. Only after the end of all work stages is the underfloor heating considered complete.