Why doesn’t go into the settings of the router, what should I do? Reasons and instructions for setting up equipment

In the twenty-first century, almost every inhabitant of the planet Earth has the Internet. People can no longer imagine life without this greatest invention. Cinema, music, useful articles, interesting and funny videos, as well as social networks and much more - all this is on the vast expanses of the Internet. But many users have a question about setting up a router. To complete this action does not require a large amount of knowledge and quantity of skills. Consider why this sometimes crashes.

Why doesn’t enter the router

Address 192. 168. 1. 1 is used to enter the settings of most routers. Sometimes when performing this action there are problems. Consider the reasons why it does not go into the settings of the router 192.168.1.1.

• Invalid browser setting.
• The network card does not fit.
• The router is not turned on.
• Incorrectly typed address.
• There are antiviruses and firewalls.
• Hosts file.

Is the router turned on?

It happens that users forget to turn on the equipment and start to sound the alarm. Therefore, before analyzing serious problems, it is worth paying attention to the state of the router. If it is connected to the mains, the LEDs on the chassis blink. It’s also worth trying to reset the router. To do this, find the special reset button, which is located next to the on / off button. You need to hold down the reset button for a few seconds and then turn on the router again.

Invalid browser settings

Most often, this problem occurs if the browser is in turbo mode or a similar function. In addition, you should check the equipment for viruses, since very often they are the reason for the unstable operation of the Internet.

Network Card

Often, problems arise because the network card is not working or it is not connected. To determine this complexity, you need to check the network settings. To enter them, open the control panel, then go to "Network" and "Internet", and then to "Network Connections". You can also type ncpa.cpl in the Run line and click OK. When the necessary settings are opened, it is necessary to determine the network connection of the computer or laptop. If this network is highlighted in gray, click on it, and in the window that appears, select “Enable”. There may be a situation in which you cannot turn on the network connection, because the computer does not have the necessary drivers.

Incorrectly typed address

To check whether the user enters the correct address, open the "Run" line and enter the cmd command. After that, in the window that appears, enter the ipconfig command and press the Enter key. The program displays the basic network parameters of this device. The necessary information will be in the line "Main gateway". If there is no 192.168.1.1 address in this line, then we write down the address that was displayed in this line and go to the settings using it.

Antiviruses and firewalls

Also common are cases when it does not go into the settings of the router due to antiviruses and firewalls. The thing is that they can, at their discretion, block some Internet connections. To solve this problem, in the lower right corner (next to the clock) click on the up arrow. In the window that appears, click on the antivirus and turn it off for a while. It is also worth temporarily disabling the system firewall. To do this, open the control panel, go to "System and Security", then open the "Firewall" and turn it off.

Hosts file

If all else fails, then you need to check the hosts file, but this method is suitable for advanced users, since it will be necessary to check notepad entries for errors. To do this, call the "Run" window, then enter C: \ Windows \ System32 \ Drivers \ etc, and press the Enter key. Check the notebook for errors.

Does not go into the settings of the router 192.168.0.1

There are several reasons why you can’t access the router settings.

• Incorrect connection settings.
• Invalid IP address.
• Router malfunction.
• The computer is not connected to the router.
• Network card problems.

We solve the problem in simple ways.

Most often, the problem in the operation of the router is associated with the simplest errors that can be fixed without resorting to complex methods.

1. It is necessary to check the correctness of the entered address, as often users enter the one that friends suggested to them, or the one that they found on the Internet. The address you need is written on the back cover of the router. If he is not there, then you can recognize him in the following way. Run the line "Run" and enter the cmd command in it. Next, in the window that appears, write ipconfig and press Enter. Opposite the line "Main Gateway", the correct address will be written.
2. It sounds corny, but try restarting your computer.
3. You should also disable the antivirus or firewall for a while, as they can cause certain malfunctions in the network. You can do this in a small window next to the clock.
4. Try using a different browser.
5. Reboot the router using the button on the back of the device.
6. To identify the root of the problem, you should try to connect to the network using another device (laptop or phone). This will determine if the problem is in the router or in the computer.

We analyze complex problems

The main problem, which cannot be solved in one action, is that the address is switched to static mode instead of dynamic mode. To correct this situation, you can use the following instructions:

1. We go to the network and sharing control center. To do this, in the lower right corner of the desktop, click on the network icon.
2. In the window that appears on the left there will be a menu in which you must select the item "Change adapter settings".
3. In this window, you will need to find the necessary network connection from the proposed list.
4. Having found it, we click on it with the right mouse button and select the properties.
5. After that, select the Internet protocol version 4. In the window that appears, check if the field for obtaining an IP address is automatically checked. If the field is selected correctly, then the network card sends a request to the connected router, and in response it sends the IP address to the network card.

You can find out the IP address by returning back to the adapter settings menu, in which, by right-clicking on the desired connection, select the state.

Does not go into the settings of TP Link, Zyxel Keenetic router

TP Link and Zyxel Keenetic are some of the best routers. They are extremely popular in the CIS. The thing is that these routers have excellent characteristics, are easy to install and continue to use. What to do if it does not go into the settings of the Keenetic router? In this article, the user could already find tips on solving the main problems, because of which it is not possible to go into the settings of the router. We will not repeat ourselves and discuss the point problems associated with TP Link and Zyxel Keenetic routers. What to do if it does not go into the settings of the Zyxel Keenetic router? In this case, you need to deal with the network card and make sure the address you enter is correct:

• Open the cmd command line, type ipconfig and press Enter.
• We verify the data obtained with those that were used when running the settings of the router.
• We compare these settings with the table below.

What to do if you can’t access my.keenetic.net

Despite the fact that Zyxel Keenetic is a fairly simple equipment, users often have problems accessing my.keenetic.net. In this case, do the following:

• Make sure the address you enter is correct. Note that it looks like this: my.keenetic.net.
• We check all the wires of the equipment, starting with the one responsible for powering the device, and ending with the network cable. Make sure that they are connected. It is also necessary to check them for various defects and damage.
• The problem may lie in the browser. To check this option, you need to use another browser, for example, "Opera". If they are not on the user's device, then you can turn to Internet Explorer for help.
• The problem is with the device itself. The thing is that the router, like any equipment, is prone to marriages. Therefore, in this situation, you should take it back to the store. Do not forget to bring all your checks and documents! If they were lost, you should reset the router configuration settings or contact the wizard for help.
• You should also see the network options. To do this, go to the "Network and Sharing Center." After that, open the "Change network adapter settings." Click on the desired network with the right mouse button and go to the properties. We check the item "Obtaining an IP address automatically." Opposite him, you need to click the circle.

How to enable and configure a DNS server

The DNS server is, first of all, the Internet security of the computer. The process of installing this server only seems difficult. In fact, there is nothing complicated about this. First, check if the DNS server is installed on the user's computer. To do this, go to the "Control Panel", open "Network and Internet", then "View network status and tasks."

When the user has completed these steps, you must select your network connection, open the General panel, go to Properties. By the next step, open the properties of "Internet Protocol Version 4 (TCP / IPv4)", go to the "General" tab, check the item "Use the following DNS server addresses." If it is activated, it follows that the DNS server is installed on the computer.

To configure the DNS server does not require a large number of actions. You only need to use the previously opened window. We go to the tab "Advanced". In this window, the server is fully configured, so this does not cause difficulties for users of any level.

Conclusion

In this article, we made sure that in order to configure the router, you do not need to have a large amount of knowledge in the computer field. Following the instructions in this article, the user can always solve the problems associated with the router. We answered in detail the question of what to do if it does not go into the settings of the Zyxel router.