Mosin rifles began to be made in 1903. Initial modifications were made without stores. As sights they used conventional flies. It should also be noted that almost all modifications were equipped with bayonets. Later models were equipped with belts. Springs were most often used with a diameter of 2.3 cm. The trunks were both rifled and smooth type. In order to familiarize yourself with Mosin rifles in more detail, you should study the parameters of known modifications.
Weapon sample 1907
This Mosin carbine has the following characteristics: the barrel length is 87 cm, the muzzle energy is 900 J. This gun is suitable for aimed shooting at a distance of over 500 meters. It should also be noted that the store in this configuration is missing. The stock in this case is made of wood. In turn, the barrel is classified as rifled.
Cartridges of only caliber 7.2 mm are suitable for him. The recoil pad of the presented gun has a deaf type. In this case, the seal above the shutter is made quite durable. The sear in the indicated model is used with a special ball. Due to it, the spring does not fall down. It should also be noted that the stem diameter is exactly 3 mm. The fuse in the indicated rifle is used with a clamping nut.
Reviews on the modification of the sample in 1907
The specified Mosin carbine (model 1907) is not particularly accurate. It should also be borne in mind that the gun gives a lot of misfires. This is due to a greater extent due to the characteristics of the rammer. The sighting bar of the presented instance is provided for a width of 3 cm. It should also be noted that the butt is used quite convenient. However, the recoil during the shot is felt great. In service this gun is not too simple. In some cases, the sear falls quite tightly. In addition, it should be noted that the rammer mechanism must be cleaned frequently.
Model 1938
This Mosin carbine for hunting from the previous model is not very different. In this case, the emphasis is used steel. In this case, the muzzle energy parameter is at the level of 950 J. The stopper in the rifle is used exactly 2.5 cm in diameter. At the same time, there is a latch on the mainspring. The pusher in the presented model is equipped with a protective screw. The barrel length in this case is 92 cm. The pin in this Mosin configuration of sample 1938 uses medium hardness. The recoil pad is made round. It should also be noted that there is a seal above the shutter. This Mosin carbine for hunting (market price) costs about 11 thousand rubles.
Opinion about the gun sample 1938
At one time, this Mosin rifle (carbine) was very popular. However, today it is not very popular. This is primarily due to poor accuracy. Moreover, the problem with misfires was not solved in the Mosin modification of the 1938 sample. If you believe the feedback from consumers, then the pin in the presented instance is used too short. Due to this, the screw gets dirty quite often.
It should also be borne in mind that there is no way to adjust the pillar of the Mosin model of 1938. The specified rifle has a standard spin. In its turn, the whisper works practically without failures. According to the owners, the back plate of this model is made with high quality. It should also be borne in mind that the latch over the mainspring in the gun is provided. As a result, we can say that the Mosin rifle of the 1938 model is suitable for hunting, but it still has disadvantages.
Modification of the sample 1944
This rifle is capable of boasting a level of energy of 950 J. In this case, the barrel is used smooth and its length is as much as 95 cm. The mainspring, in turn, has a diameter of 2.6 cm. The receiver for the Mosin model of 1944 is quite wide . In addition, it should be noted that the store in this case is designed for six rounds.
It is located at the top cover. The sealant in the Mosin rifle of 1944 is used with a thickness of 1.3 mm. The sear is fixed on two screws. The Mosin carbine stock is made of oblong shape. Special attention to this gun deserves a fuse. In this case, its head is 2.2 mm in diameter. The spin of the Mosin model of 1944 is used with a small ball.
The trigger in the rifle is located under the block. The stem diameter is as much as 3.4 mm. This model has only one piston. It should also be noted that the Mosin modification of the 1944 sample is equipped with a small cuff. The post-delivery mechanism is standard. There is no latch on the shutter. In addition, it is important to mention that the cartridges for the model are used in 7.2 mm caliber.
What do they say about the gun model 1944?
Many buyers appreciated this rifle because of its convenient stock. It should also be noted that the store in this case is inserted quite simply. If you believe the feedback from consumers, then the recoil pad is erased extremely slowly. However, the Mosin rifle of the 1944 sample also has drawbacks. First of all, they are associated with the sights. It is not possible to install an optical sight on this configuration.
The bar is only 2.5 cm wide in this case. It should also be noted that the fuse needs frequent maintenance. At the same time, the usual sear was established. The recoil of the Mosin rifle of the 1944 sample is quite significant. For hunting, this model is not suitable. However, she has all the advantages. In particular, mention should be made of the presence of pads above the cuff. In this regard, the seal is rarely erased. The pin is used in steel, so it can last a fairly long time.
Model KO 8.2
These Mosin carbines are suitable for aimed shooting at a distance of over 450 meters. It should also be borne in mind that this modification is equipped with a fairly high-quality emphasis. Due to this, the recoil of the Mosin rifle KO 8.2 is not much felt. The sighting bar is exactly 2.5 mm wide. The diameter of the mainspring is 2.3 cm. The ultimate energy parameter of the substituted rifle is 800 J. The stop in this case is the usual one. In this case, clamping screws on the latch are provided.
Special attention in the Mosin rifle KO 8.2 deserves the quality of the post-delivery mechanism. The shutter twitches without much effort. It should also be borne in mind that the axis in this case is mounted on the cocking lever. There is a special lock over the disconnector. Due to this, the spring is rarely deformed. The pin for this model is installed with one ball.
Reviews about the gun KO 8.2
These Mosin carbines are best suited for boar hunting. The sighting device in this case can be adjusted. It should also be noted that the cartridges can be used with a caliber of 7.2 mm. The recoil pad in the Mosin KO 8.2 rifle is quite durable. At the same time, the sealant is very rarely contaminated. The sear in almost no need of maintenance, and this is a big advantage. The block of this rifle above the hook is provided. It should also be noted that Mosin KO 8.2âs weapon is cocked quite simply. If you believe the feedback from consumers, then lubricating the surcharge mechanism is often not necessary.
Modification "Elk 7.1"
These Mosin carbines from other modifications differ in that you can install an optical sight on them. In this case, the trigger mechanism is provided with a locking nut. Sighting range at the Mosin rifle "Elk 7.1" fluctuates around 550 meters. The limiting energy parameter is not more than 800 J. The disconnector in this case is equipped with a latch. Used for Mosin rifle "Elk 7.1" cartridges of caliber 6.5 mm. The butt plate is provided in a round shape. It should also be noted that this model has a belt.
The store at the presented instance is designed for five rounds. The seal is mounted above the shutter as standard. At the same time, it holds powder gases reliably. Special attention in the Mosin rifle "Elk 7.1" deserves the quality of a whisper. In this case, it is installed immediately above the latch. It is held at the expense of two screws.
Consumer opinion on the model "Elk 7.1"
For hunting, many people choose Mosin carbines for their convenient sight. In addition, it should be noted that the receiver of the presented instance is quite wide. Above the pusher, the latch has a diameter of 2.3 mm. The mainspring is installed with a diameter of 2.6 cm. A locking nut is provided above the stopper.
The trunk in this case has a length of exactly 95 cm. The disconnector in it is located near the central axis. If you believe the feedback from consumers, then the store is taken out quite simply. It should also be mentioned that the fuse does not need frequent lubrication. If necessary, it is easy to extract the sear. Misfires at the gun rarely occur, and this pleases many owners.
Weapon 91/30
This Mosin hunting carbine has a unique rifled barrel. Its length is 87 cm. The coupling of the presented specimen is quite wide. It should also be noted that the casing is installed tight and protects against powder gases reliably. The width of the aiming strip in this case is 26 cm. It is suitable for installing an optical sight.
Above the diopter there is a special clamping screw. The stand is made of alloy steel. In turn, the stopper is provided aluminum. There is a latch at the mainspring. At the same time, the pusher is designed for the Mosin 91/30 rifle on two axes. In this case, the rammer is of high quality. The diameter of the retainer spring is 1.2 cm. The disconnector is not provided for the presented model. It is also important to mention that the pin in the Mosin model 91/30 is installed rather short, however it completely covers the block.
Owner reviews on the 91/30 modification
Many owners of this rifle respond positively. Her muzzle energy is very high. All this makes it possible to feel comfortable on the hunt. It is also important to mention that the stock is designed for a shotgun of an interesting shape. Along the edges it is a little ground, so the recoil is not felt big when fired. The sealant in the Mosin model 91/30 is exactly 1.5 mm thick. The recoil pad is standardly made round. If you believe the feedback from consumers, then whispering in need of frequent lubrication does not need.
In addition, it should be noted that the fuse operates without failures. In turn, the spring retainer is of poor quality. If necessary, the block is removed very simply. It is also important to consider that the Mosin 91/30 rifle has a fairly wide stock. Due to this, the coupling is very rarely contaminated. Additionally, this rifle was appreciated by many because of the post-delivery device. The protective nut on it is quite durable.