The Korean company "Mikatsu" is known to many people for its boat engines. If we consider specifically four-stroke models, then they are distinguished by high performance. The transom height of such models is on average 420 mm. There are not more than three pushers in the construction. If we talk about the features, we can distinguish the presence of reverse gear locks.
Additionally, manufacturers make four-stroke engines with a fairly high-quality fuel system. However, such modifications also have disadvantages. In order to understand this issue in more detail, it is best to consider the most popular models, and in parallel with the characteristics, find out real consumer reviews.
Review of the Mikatsu M3 model (9.9 hp)
This outboard motor "Mikatsu" (9.9) has good reviews. Many buyers prefer this model for its performance. The engine overheats in this case very slowly. However, it should be borne in mind that his fuel consumption is quite large. The vertical shaft of the presented instance is set with a diameter of 13 mm. It should also be noted that the rear gears are made of a special aluminum alloy.
If you believe the reviews of consumers, they are erased slowly. The drive shaft of this outboard motor is fixed securely. The skeg in this case is installed under the propeller tray. Special attention in the presented model deserves a high-quality cooling system. In total, the manufacturer has six intakes for this model. According to the owners, you can clean them without too much effort. Today this boat motor costs about 152 thousand rubles.
Reviews about the engine "Mikatsu M2" (3.5 h.p.)
This outboard engine "Mikatsu" (3.5) reviews deserves positive. This model is primarily interesting due to the use of a high-frequency gearbox. The engine in this case is mounted on a sturdy pallet. Its thickness is as much as 12 mm. The drive gear in the presented instance is mounted on the central shaft. If you believe the feedback from consumers, then it does not need frequent lubrication. It should also be noted that the gearbox is removed quite simply. Thus, if necessary, it can be easily inspected. More reviews of outboard motors "Mikatsu" (3.5 hp) are associated with a quality tiller.
Of the shortcomings, it is important to mention the low frequency of the central rod. For a maximum minute, he is able to make about 3100 revolutions. At this time, similar modifications to this parameter are at the level of 4300 rpm. This happened due to the fact that the central shaft in the configuration presented is quite massive. It can withstand large loads, but its parameters are small. In our time, this outboard motor will cost the buyer about 130 thousand rubles.
Features of the modification "Mikatsu M5"
The indicated outboard motors "Hyundai Mikatsu" reviews are most often received for a high-quality water pump. Thus, pumping is very fast. The impeller of the presented instance is quadrangular. The front gear of the engine is mounted on a special sleeve. If you believe the feedback from consumers, it is erased very slowly. Also, owners praise this model for a rather voluminous anti-cavitation plate. It is fixed in this case over the propeller shaft. The gearbox is protected by a special casing. This model is worth about 140 thousand rubles in the store.
Consumer reviews for "Mikatsu M9"
Reviews about outboard motors "Mikatsu" (5 hp.) There are a variety of. Some choose this model because of high-quality deadwood. It is installed in this case on a small pallet. At the same time, there is a clamp in the presented model. The carburetor deserves special attention from the outboard motor. There are three valves in total. They are able to withstand extreme pressure. It should also be noted that, if necessary, it is removed without problems. In this case, the beam is located in the upper part of the motor.
If you believe the feedback from consumers, then it is quite simple to maintain. The anti-cavitation plate in the specified model is available. It is installed above the anode and does not come into contact with the reverse gear. According to customers, this model is very economical in fuel consumption. An hour of operation of the engine consumes no more than 1.3 liters of gasoline. This motor is worth about 146 thousand rubles today.
What is being said about the Mikatsu M15?
This outboard four-stroke engine "Mikatsu" (5 hp) has a wide variety of reviews. The presented configuration in our time is in demand due to a high-quality gearbox. It is installed as standard in a protective casing and is not afraid of high humidity. The central stem in this case has a diameter of exactly 120 mm. The reverse gear of this outboard motor is located near the anode.
Due to this, if necessary, it can easily be disconnected. The valve wear on the presented unit is very small. In general, the carburetor is installed high-quality and breaks quite rarely. However, these outboard motors "Mikatsu" reviews have negative. Of the minuses, consumers note mainly the lack of a reverse lock. Thus, it is sometimes difficult to cope with a boat engine. It will cost the buyer in the store for 155 thousand rubles.
New modification "Mikatsu M18"
This Mikatsu four-stroke outboard motor is most often received due to the high quality of deadwood. Also, the new model, among other devices, is distinguished by the presence of a new generation gearbox. If you believe the feedback from consumers, then its failures are quite rare. In this case, the vertical shaft of the outboard motor is made of a special aluminum alloy. The reverse gear of this load model is capable of withstanding large loads.
It should also be noted that the impeller of the presented unit is cast. The anode in this outboard motor is located above the anti-cavitation plate. Deadwood is installed standard, and the setup is very simple. If you believe the feedback from consumers, then the fuel consumption of the presented unit is negligible. According to the documentation, an average of about 1.3 liters of gasoline is spent per hour of use. This boat motor costs about 120 thousand rubles today.
Opinion about the Mikatsu M20 model
These Mikatsu outboard motors have positive reviews and are primarily distinguished by their deadwood. It is installed in the presented model of automatic type. All this suggests that you can configure it quite simply. In this case, the central stock is removed without unnecessary effort. In this case, you can disconnect the crankshaft yourself.
In addition, it should be borne in mind that this configuration has a high-quality fuel system. Valves in this case are installed copper, and they are located above the carburetor in horizontal order. Due to this, their purge occurs more efficiently. This motor in the store costs about 160 thousand rubles.
Reviews about "Mikatsu M30"
These boat motors "Mikatsu" reviews have the most diverse, but many buyers choose this model for ease of management. In this case, the tiller is fixed quite firmly. It should also be borne in mind that it has an extensive rubber gasket. Thus, adjusting the position of the deadwood is not difficult even for a beginner. The fuel system deserves special attention in the presented unit. Valves in this case are able to withstand pressure no more than 5 bar. The reverse gear of this model is installed immediately above the stove. If necessary, it is removed very quickly. It should also be noted that the outboard motors "Mikatsu" reviews deserve good because of the high quality reverse lock.
Even in the model there is a special spring that holds the vertical shaft. The propeller of the presented instance is provided by the manufacturer with a plastic screw . The water pump of this outboard motor is located above the impeller. If you believe customer reviews, the gearbox breaks down only if it is improperly lubricated. Today this configuration costs about 180 thousand rubles.