The air conditioning system is quite common in modern apartments. It allows you to create an atmosphere of comfort in the house by regulating the indoor climate. Since it is not very easy to install a split system yourself, you must strictly follow the sequence specified in the installation instructions. I must say that it is possible to carry out all actions with one's own hand.
Before you install the split system yourself, you must definitely collect all the necessary tools, determine the location of the devices, as well as the type of unit. For example, there are devices that can be installed on the floor, rather than clinging to the wall. Moreover, in this case, the installation will be easier and faster.
So, you will need all the spare parts that come with the device, as well as a puncher, rolling, reinforced tape, pipe cutter, brackets (for fixing blocks), a wrench, a level, a device for removing air from the copper track. In addition, you will need to get the device to install the absence of freon leakage.
Before you install the split system yourself, you should choose the right place and conduct a separate electrical wiring, since the presented device has a lot of power. Now we begin the installation of the external unit. To do this, make holes in the wall and fix the brackets on it. Use a level during operation. Also, be extremely careful with refrigerant pipes that should not be kinked. And you should protect the external unit from icicles and rain with a metal canopy above it.
Before installing the split system yourself, make repairs indoors (if necessary). After that, it is necessary to fix the indoor unit. Using the level, expose the fasteners, and screw the device to them with screws. Next, check how firmly the unit is mounted. To do this, you need to turn it on and evaluate the level of noise and vibration. At this stage, note that the unit can not be installed above the batteries, near appliances operating at high frequencies, above the bed. The level of blocks must be maintained as correctly as possible.
If you do not know how to properly install the split system further, follow these recommendations. In order for tubes and hoses not to be visible, it is necessary to make strobes for them in the walls or purchase special decorative boxes. Further, using special equipment, it is necessary to remove air from all the tubes.
In order to be sure of the normal operation of the device, it is necessary to check it using the appropriate testing program. Well and last of all you need to remove all the garbage that appeared after work.
During use, try to carefully monitor the level of freon in the tubes, as well as the cleanliness of the external and internal components. Also note that between the blocks the height difference should not be very large (depending on the model of the device). That's all the tips on how to install a split system yourself. Good luck