Over the past few years, much has changed in the field of computer technology: what used to seem something extraordinary is now considered quite mundane and familiar. As an example, we can recall the history of the popularization of manipulators such as “computer mouse”. It is possible, someone else remembers the heyday of the DOS system, when the mice, if they were, were fully supported by only a very small number of programs.
However, the Windows operating system appeared: first 3.1 (we don’t indicate previous versions because of their low popularity), then 3.11 and, finally, the famous Win 95. Since that time, such an exotic device as a mouse has become, in fact, an integral part of any computer . Although it was quite possible to do without it. As you know, history develops in a spiral: it is now difficult to imagine a complete electronic assistant without a printing device. It is not surprising that the Internet is full of questions like “how to connect a printer to a laptop.” Everyone can buy the device itself, but there may be some difficulties with the setup. For example, one of the popular questions on the forums is “how to connect a printer to a laptop”. This point is quite natural, especially when you consider the popularity of laptop computers.
Before we describe the procedure, we immediately warn the reader that understanding the question “how to connect the printer to a laptop” is not easy ... but elementary. Are you ready to become a little guru? Then, read on!
In fact, how to connect a printer to a laptop, you need to ask any owner of a computer equipped with a printing device. There are no differences. All actions are identical.
The vast majority of modern printer models are connected to a computer via an USB interface cable. All connectors and plugs are standardized. So, after unpacking the printing device, you need to read the instructions for it, as it may require preparatory steps. Then we insert the CD-ROM that comes with the printer into the drive and start installing the driver: with the "AutoPlay" function active, everything starts automatically, otherwise you need to open the disk structure and start setup manually. During installation, the program will ask you to turn on the printer. To do this, turn on the USB cable coming from the device to any free USB port on the computer; insert the sheets of paper and apply power (plug to the outlet and the power button).
If everything is fine, then the driver will report a successful installation.
By the way, this method of connecting a laser printer to a computer is also suitable for inkjet models. That is, to make it work, you need to physically connect the interface, install the driver and supply power.
It's a little harder to figure out how to connect the printer via wi fi. If the printer model contains a wireless module, then you need to configure your laptop and printer to work in point-to-point mode. For models with an Ethernet interface, you need to purchase an access point and connect the device to it. It remains to install a network printer in the laptop (work by IP address). And, of course, one of the simplest (but not so cheap) solutions is to "share" the printer from another computer that has a Wi-Fi unit.