If you are interested in the adhesive for Ceresit cm 11 tiles , first you need to familiarize yourself with its quality characteristics. The reviews will also help you understand whether this composition is suitable for the work that you intend to carry out.
Characteristics
The described composition is intended for laying stone and ceramic tiles, which is characterized by water absorption up to 3%. The size of the product should not exceed dimensions of 30 x 30 cm. The base should first be checked for strength with regard to floors and walls. The mixture can be used both outdoors and indoors. Most often, this glue is used in industrial and civil engineering. If water will periodically or constantly affect the surface, then the glue for the “Ceresite cm 11” tile is suitable for you.
Extra features
The manufacturer allows the use of the composition if necessary laying tiles, the water absorption of which does not exceed 3%. This applies to clinker, stone and porcelain products. However, at the same time, work can be done exclusively inside buildings, on floors that will not be heated. If you have to work with a base that is deformed, as well as with a screed that is heated during operation, you should add a liquid elasticizer to the composition. This also applies to other complex reasons.
Customer Specifications
Adhesive for tiles Ceresit cm 11, as noted by consumers, can be used over a wide temperature range. However, you should not start work if the thermometer has dropped below +5 degrees. The manufacturer does not recommend starting manipulations on laying tiles if the air temperature is above +30 degrees. Specialists in their field emphasize that it is important not only to comply with external conditions, but also to use high-quality adhesive, but also to prepare it correctly. Thus, 1 kilogram of dry composition will need water in a volume of 0.24 liters.
If you will use adhesive for Ceresit cm 11 tiles, it is important, as experienced home craftsmen note, to foresee the flow of the mixture in advance. This parameter can vary from 1.7 to 4.2 kilograms per square meter. It is important to remember that after preparation, the solution will retain its properties for 180 minutes, while the open time is fifteen minutes.
It is worth listening to those consumers who have already used this adhesive. They mention that it is possible to correct the position of the tile after it has been laid in place within 20 minutes. You can start filling the seams in a day. All buyers who used a frost-resistant composition say that the adhesive for Ceresit cm 11 tiles, the consumption of which was mentioned above, can undergo 100 freezing and thawing cycles. In addition, you can use this composition at a very wide temperature range. The glue can be operated with indicators from -50 to +70 degrees.
Positive feedback
The described adhesive composition is very resistant to high humidity, in addition, it excellently undergoes temperature changes. Buyers who purchased glue for repairs note that it is very convenient to use. Most experts characterize this mixture as an adhesive that is highly adhesive when it comes to vertical surfaces. It can be used without fear that it will pose a fire hazard. For human health, this mixture is not harmful. Most home masters choose this product for the specified reasons.
Area of use
Ceresit cm 11 tile adhesive, reviews of which you can read above, is intended not only for strengthening stone and ceramic tiles. It can be used when working with facades, socles, entrance groups, terraces, parapets, balconies, as well as exploited roofs. If there is a need to use this composition in indoor pools, then an elasticizer should be added. The mixture is in excellent contact with wood chipboards, drywall, OSB boards, as well as other deformable substrates. If you decide to use Ceresit 11 glue (Ceresit cm 11) for the tile, first you need to find out what characteristics the base has. This product can be used for manipulations carried out on gypsum substrates. You can also work with glue in tandem with old tiled facings.
Composition cost
Glue for tiles Ceresit cm 11, the price of which is 260 rubles, has a wide area of use. It is important to purchase a composition that has been properly stored and also has intact packaging. The above amount will have to be paid for a bag, the volume of which is 25 kg. Before purchasing, check if the product has expired. If such a circumstance takes place, then the acquisition of glue should be abandoned, even if the price is lower compared to that offered by competitive points of sale.
Features of use
Glue for Ceresit cm 11 tiles, the price of which was indicated above, must be not only correctly selected, but also used according to the technology. Before starting the manipulation, you need to prepare the surface well, which involves cleaning from stains, dust and dirt, as well as from oil or paint. Glue should be applied without preparation if you have to work with a concrete, plaster or cement surface. Such bases have excellent absorbency, which is why they should be moistened in advance. Otherwise, you will encounter a glue consumption that is many times higher than that stated by the manufacturer.
Glue for Ceresit cm 11 tiles, the characteristics of which are presented in the article, should be diluted before use with water, mixing the mixture until a homogeneous mass is formed. No lumps should be formed in it. The surface treatment of products with glue should be done using a grater, which has teeth. This will fill all the voids and ensure high-quality fastening of the product to the base. After the tile was in place, it is necessary to slightly push it into the surface, moving it slightly from side to side.
Do not rush into laying the next product, as you need to make sure that the previous one is mounted correctly and corresponds to the horizontal level. The latter must be verified using the building level. Only with this technology will it be possible to achieve the ideal result, regardless of whether work is carried out on a vertical or horizontal surface.