Each new car has a manual. This instruction should not be neglected. It is advisable to read it carefully. In it you can find a lot of interesting things. For example, there you can read about how to change the oil in the automatic transmission. To do this is not at all as difficult as it might seem at first. True, if you have never encountered such work, you can turn to the help of specialists in the service station.
If for any reason you have not saved the instructions from the car, then information on how to change the oil in the automatic transmission can be found in all kinds of information manuals on cars. It is also useful to see information on the Internet, chat with car owners of the same brand as yours on the forums.
So, what do you need to know in order for the
oil change in the box to be easy and simple? The oil in the box is completely unaffected by fuel. Neither soot nor condensate acts on it. But at the same time, the oil becomes polluted over time. This is due to the fact that the mechanical parts inside the box rub against each other and form small particles deposited in the oil.
Each time the car is in motion, the oil in the box is very hot. And this is also one of the reasons to think about the need to change the oil in the box. The car owner must remember that in the box the oil should not heat up to more than 90 degrees. If the oil temperature is higher, it begins to “wear out”. If the temperature reaches two hundred degrees, the oil becomes completely unsuitable for further use.
And here is another reason for changing the
oil in the gearbox in a timely manner. Any automatic gearbox oil contains special elements that prevent the appearance of corrosion and rust on the internal mechanisms of the car. But over time, the oil loses these beneficial properties.
Changing the oil in
the VAZ 2109 gearbox is done in the standard way. For this:
- The car rises with a special lift.
- The pallet is removed from the car.
- The old oil is carefully drained.
- The old filter is replaced with a new filter.
- The pallet returns to its place.
- A new high-quality oil is poured through a special hole - “neck”.
The gearbox will need to be flushed if the vehicle has been used for a long time without changing the oil. For these purposes use special additives. Flushing the gearbox in such cases is a necessary procedure before changing the oil.
Flushing is necessary for:
- Getting rid of soot.
- Get rid of soot.
- Disposal of other pollution.
- Flushing the oil channels.
To flush the gearbox, you can use special cleaning fluids that are sold at service stations or in auto parts stores.
In order to avoid problems with the car,
change the oil in the box regularly. Even when the car is little exploited.