The heated towel rail plays an important role in the apartment, it is convenient to dry laundry in the bathroom, and the bathroom is also heated. Due to the constant maintenance of heat in the room, dampness is not diluted and such an unpleasant thing as a fungus does not appear. The bathroom is reduced in humidity. Nowadays, people often make repairs and combine a bathroom with a toilet. To combine, you need to transfer the heated towel rail from one wall to another. How to do it and what are the nuances? Let's try to figure out in our article today.
What preparatory measures are needed before moving the heated towel rail?
The easiest way to change the location of the electric heated towel rail models. They are installed by themselves and do not require coordination with special oversight bodies. With this type of device no additional investments are needed. Even a beginner can handle the installation of this device. Towel dryer transfer is as follows: the desired device is removed from the wall and mounted on another. In some cases, you have to work on sockets and wiring.
With water devices, the situation is much more complicated. It is necessary to coordinate the transfer of the heated towel rail with the authorities for supervision of the state of communications in residential buildings. The state of communications inside the housing is assessed, after which permission is given for the installation of devices. The homeowner takes responsibility for changing the parameters in the general system of the house.
What to consider when choosing new equipment?
When choosing a new device and transferring the heated towel rail to another wall, it is important to understand that there should be no additional loads on the heating system. The device must have a quality certificate. It must be selected according to power, based on the area of the bathroom. Specialists put a heated towel rail, avoiding the creation of hydraulic backwater. Installers also do not make air congestion. The work should be performed only by a qualified craftsman or independently, but under the supervision of a specialist.
What is the best place to place a heated towel rail?
Having agreed to transfer the heated towel rail to another wall, people think about how to better position it. The ideal option is to install equipment above the washing machine. If a front-loading machine is installed, then its cover should not reach the heated towel rail when opened. The minimum distance between them should be approximately 60 centimeters.
Additional requirements
There are additional requirements for the installation of this equipment according to SNiP:
- The device must be fixed at a height of at least 95 centimeters. The maximum height for the heated towel rail will be 170 centimeters. Human growth is taken into account, it should be convenient for residents of the apartment to use this unit.
- If people choose a U-shaped element, then the mounting height will be 110 centimeters. When an M-shaped heating element is preferred, it is mounted to a height of 90 centimeters from the floor.
- Many people choose a ladder heated towel rail. It is mounted in such a way that a person can hang clothes on the upper crossbar.
If you follow all the recommendations for the selection and installation of the equipment you are looking for, then it will be convenient to use for all the residents of the apartment.
What are the nuances
The transfer of the heated towel rail to another wall is carried out according to the rules:
- It is necessary to choose the shape of the device, as well as its design, so that they fit the side of the intended location of the element. It is necessary to take into account how communications pass, to check whether the heated towel rail will fit on the selected wall.
- The selected device must have a bypass. It is a jumper with a tap. This element is necessary to maintain the health of the heating system in the event of an accident.
- The length and cross section of the device must correspond to the diameter of the pipe that is installed in the house.
- At installation it is necessary to observe that sharp changes of levels did not appear. Otherwise, there is a risk of air congestion. Usually the pipeline is laid horizontally and then installation work is carried out.
- An important point is which pipes are used in the work. They must be heating and cope with high pressure. Such pipes quickly heat up and hold a certain temperature regime for a long time.
For work, special tools will be required. These include a grinder, wrenches, and screwdrivers. Having these tools available, you can start the operation.
How to start work on transferring a heated towel rail?
The transfer can begin when the person has made sure that the hot water supply is turned off. Usually they ask the plumber to block the riser in the basement of the house at a certain time. It is advisable to inform the neighbors about their actions, you can place an ad at the entrance. It should indicate when and for what period of time the water supply will be shut off.
What stages of work can be distinguished?
The transfer of the heated towel rail in the bathroom is carried out in stages. The following sequence of actions is distinguished:
- Old equipment is being removed. To do this, you need a grinder, it removes old appliances. It is important to cut the pipe correctly, as new equipment will have to be mounted on the remainder.
- The communications are crimped, a bypass with a crane is installed.
- The pipeline is being laid. Work goes from a new heated towel rail to a riser. When the distance to the new heated towel rail increases, then carry out hydraulic calculations again. Then it becomes possible to immediately position the pipe correctly. If there are errors during the installation, the element will not warm up and maintain a certain temperature level.
- Some hide the pipeline under special materials, erect a false wall. This method of sheltering a pipe takes a lot of time.
- Before attaching a heated towel rail, mark with a pencil its future location. After that, you can connect the necessary element to the pipeline.
Be sure to check if the heating device is working in a new place. If everything is in working condition, then it is possible to carry out repair work in the bathroom if necessary.
Possible installation difficulties
People who do not encounter the installation of elements of this type, it seems that every beginner will cope with this task. This statement will be a clear fallacy. Few people think that the transfer of a heated towel rail is associated with a change in pressure in the system. In the future, the device will work under high water pressure, so all inaccuracies during installation will result in big problems during operation of the element. That is why it is better to invite competent specialists to install. They will carry out the transfer of the heated towel rail as soon as possible. The system will work without complaints, there will be no risk of flooding the neighbors.
Difficulties can also arise at the stage of removing the heating element from a previous location on the wall. You can damage the heated towel rail at the joints. Therefore, you should be extremely careful when working.
So, we found out how to transfer the heated towel rail to another wall. Now there should not be any problems with its installation.