Quite often in residential apartments and offices you can find wall and ceiling decoration with plastic panels. And this is not surprising, because this material is very inexpensive, good in operation and for a long time retains an excellent appearance. And the work is incredibly simple. Even the person who works with him for the first time is unlikely to have any difficulties.
But the stores mainly sell panels with a length of 2.4 meters. Therefore, during repair, you have to cut the panels to the required dimensions yourself. And the question arises: "What do plastic panels cut with?"
Knife
You can use a simple knife, only after sharpening it as best as possible. Although this is not the best solution, or rather, the most unsuccessful. After all, the cutting method is not suitable for cutting panels. But still, this tool will ultimately also cope with the task.
It is convenient to cut the panel with a clerical knife. First, an incision is made from above the line, and then the material breaks.
Or you can make a knife yourself: cut a piece of rolled metal from one side at an angle of 45 degrees and grind it, and wrap the handle in order to conveniently hold it, wrap it with electrical tape.
But it is most convenient and reliable to purchase a special construction knife. Among all the answers to the question about what they cut plastic panels, the latter is the most suitable.
Saw
If a saw is used on wood, then the teeth should be for transverse or mixed sawing, and better undiluted, then the plastic will be cut neatly and evenly. Therefore, a saw is not the worst answer to the question of how to cut plastic panels.
Bulgarian
A grinder is a good option for working with panels. But there is one important nuance: you need to work very carefully with this tool, because plastic is an incredibly fragile material and there is a chance that it will break. After cutting with a grinder, it is necessary to grind the corners with a special machine. If it is not found in construction equipment, it is better to look for another way.
Power tool
If someone is wondering about how to cut wall plastic panels, and among the tools there is an electric jigsaw, then you can throw away all doubts and apply it. After all, this is one of the power tools that is suitable for this task. But first you need to try to cut an unnecessary piece. And all in order to understand which side will be cut neatly. There is also an important detail: the file should be with a fine tooth, and the pendulum stroke is disabled. So, paying attention to all the recommendations, you can easily cut the panel. Moreover, this method saves time, because with the help of an electric jigsaw you can cut several panels at once, simply folding them together evenly.
Hacksaw
But often those who have thought about how to cut PVC plastic panels, the choice falls on a hacksaw for metal or wood, but it is important that the teeth are small. The advantage of this method is that you can saw several panels at the same time. It is necessary to saw with the front side, at a slight slope and try not to press the material strongly.
Panel Cutting Rules
If the panels are only brought from the street, especially if the temperature is low there, in this case you cannot immediately start working. They need to warm up for some time, since they become even more fragile cold and can easily damage the material.
Before you start cutting, it should be noted where the cuts will be. A felt-tip pen is best suited for these purposes. It is clearly visible on the panel, and later easily erased.
During operation, we must not forget about safety measures, it is better to wear gloves and glasses. The thing is that, when broken, the panels form very sharp fragments, and there is a danger of injuring them.
And in general, this material is very fragile, so you need to work with it very carefully and carefully.
Therefore, if someone else asks himself: "What are plastic panels cut with?" - then we can boldly say that there are many options. And be sure to eventually find the most suitable.