The HP Laserjet Pro M132a MFP is one of the most compact models in the Hewlett Packard multifunction product line . It can be successfully used both in small offices and in home environments. It is about this device, its functionality, features and nuances that will be discussed in this article.
Appearance
Externally, the HP Laserjet Pro MFP M132a printer is a classic layout. That is, the scanner, printer, copier and controls are placed as compactly as possible in it. On the front panel you can find a liquid crystal display surrounded by a set of control buttons. The scanner is physically separated by a small opening for outputting printed documents. The entire main part is the print area of the printer. Here, on the front, there is a folding tray for feeding paper. There is an extension handle near the output tray. That is, everything is like typical multifunction devices that have already become a common standard.
Control Panel
A small liquid crystal display is located on the control panel, next to it are a number of indicators and control buttons. Buttons with arrow symbols allow you to enlarge the image displayed on the screen. The “Start Copy” button activates the instant copy operation. Using the “Cancel” button, marked with a red cross, you can cancel the print job or reset the current copy settings. Using the “Copy settings” button, you can preset the parameters. For example, specify the number of copies, brightness, or decrease and increase the scale.
The indicators on the left show the status of consumables, the appearance of errors or any malfunctions of the device and the readiness of the MFP for printing.
Specifications
The printer is capable of printing in black and white. Type - laser. The device has a desktop layout defined. The declared number of pages per month is about 10,000. The maximum format on which the printer can print is A4. Its speed, which is declared by the manufacturer, is 22 pages per minute.
The scanner also has the ability to process A4 documents. Its resolution is 1200 by 1200 dpi.
The copy speed of the device corresponds to the print speed, i.e. 22 pages per minute. The maximum number of copies that can be obtained in one cycle is 99.
The volume of paper that can be loaded in the input tray is 150 sheets. The MFP can work with paper with a density of 60 to 163 g / m 2 . It is also possible to print on transparencies, labels or glossy paper. For printing, only one black and white toner cartridge is used.
From the computational characteristics it is known that the MFP is equipped with 128 megabytes of memory and its processor operates at a frequency of 600 megahertz.
To connect to a computer there is a USB 2.0 interface located on the back.
Review HP Laserjet Pro MFP M132a MFP Reviews
There are a lot of responses about this device. Among them there are both positive and negative. First, pay attention to what users liked.
Positive reviews
Everyone who was satisfied with the operation of the device, note that the price of it is quite affordable. At the same time, printing speed, ease of installation and operation remains at the level. Users also like the fact that this MFP prints very quietly, without interfering with work in the office or at home.
Someone noticed in his review of the HP Laserjet Pro M132a MFP that the device is very light and compact. It is quietly placed on a small desktop.
Connoisseurs of beauty in their reviews of the HP Laserjet Pro M132 MFPs noted that the device is made in a pleasant color scheme and an unusual style.
Some of the users reflect in the response the ease of mastering and working with MFPs. Almost any program that comes with the kit is very simple and allows you to get started without delving into the subtleties and nuances of the device. That is, the printer is perfect for those who are not particularly versed in technology and computers.
Negative reviews for the HP Laserjet Pro M132a MFP
There are also enough negative responses. It is worth considering the most interesting and critical of them.
Opinions are diametrically opposed in reviews. This includes a flimsy body that bends and pops when touched. That is, the performance of plastic is poor.
Someone did not like the very small amount of toners. It is not enough for the print volumes declared by the manufacturer. Some users in their review of the HP Laserjet Pro M132 MFP noted difficulties with refilling the cartridge. After two or three operations, he begins to work unstably and print with errors. It is also noted that during operation the device emits a crack and an incomprehensible noise, which gives a feeling of incorrect or non-technological assembly of the case. But it is possible that in this case a low-quality party came across.
Among the reviews on the HP Laserjet Pro MFP M132a MFP are also feedback on the design. White color to users seemed easily soiled and short-lived. As it turns out from the reviews, the printer turned out to be very moody to the quality of the toner. That is, if poor-quality paint is filled, the cartridge will not last for a long time and will print with artifacts.
In the reviews of the HP Laserjet Pro M132 MFPs (G3Q61A), you can see that users have noticed pretty good print quality some time after starting to use. Then the first problems begin. Namely, the small capacity of the cartridge comes up, which after the first refueling may even fail.
As it turned out, it is impossible to pick up non-original components for this device, in particular cartridges. The cost of the original is about 4-5 thousand rubles.
The software that came with the printer is not always installed correctly. Perhaps this is due to incorrect drivers. Unstable operation and printing of white sheets is observed, instead of the sent text. The solution was to download other drivers, newer, from the official site.
findings
Based on reviews of the HP Laserjet Pro M132a, you can make a list of the advantages and disadvantages of the device. First, we list the positive points:
- low cost;
- fast print speed;
- quick exit from sleep mode to print mode;
- beautiful appearance and design;
- ease of use and development;
- multifunctionality.
And now a little about the flaws:
- high price of consumables: cartridges and drums;
- the impossibility of using non-original cartridges and refilling original ones;
- poor reliability of the device as a whole;
- low-quality assembly;
- low toner volume
- Unnatural printing noise.
Several analogues in the same price range
There are a large number of such devices on the market, which practically do not differ in price from the hero of the article. It is worthwhile to understand their characteristics, features and properties for comparison with the model from HP.
Canon PIXMA G3400
It is a multifunctional device with the functions of a printer, scanner and copier. Has four-color inkjet printing. On board the device there is a Wi-Fi module that allows you to connect to other devices and send documents to print directly from them. According to users, the printer has enough ink for a long time. At the same time, the cost of consumables is quite democratic.
WorkCentre 3025
Printer, scanner and copier for a small office and home. Prints with a laser in black and white format. The declared print speed is 20 pages per minute. The maximum format is the same as the hero of the article - A4. Equipped with a small LCD panel for control. Has Wi-Fi to connect with other devices. At the same time, the price of the device is only 1000 rubles. higher than the HP Pro M132a.
Brother DCP1210
This device is an MFP, the same as the model from HP. Black and white printing is done using laser technology. The declared speed is lower and is only 20 pages per minute. The maximum format is A4. The print resolution is quite high for a black and white printer and is 2400 by 600 dpi.
The scanner is an ordinary tablet format, with the same sheet size as the printer - A4. Its resolution is small and has 600 dpi. The printer, like the hero of the article, cannot print on cards, transparencies, glossy paper and envelopes.
The processor frequency is a little pumped up and has 200 MHz. To display information directly from the printer, there is a liquid crystal display. Compatible MFPs with the line of Windows and Mac OS operating systems. Its cost is only one 1000 rubles. higher than the model from HP.
Conclusion
Based on the reviews on the HP Laserjet Pro MFP M132a MFP, this printer is likely to be suitable as a temporary replacement for a better and more reliable device. Although its price is pleasing to the eye, later this savings can result in unforeseen expenses. This is due to the large number of breakdowns after refilling the cartridge, as well as the high cost of the original cartridge itself. And the inability to use non-original components forces users to buy only models from HP. In addition, for 10,000 rubles. You can find a better option in terms of price and quality. Or dig up a little and subsequently acquire a more reliable and profitable multifunction device in the future.