A droplet eliminator for ventilation is a special device that is installed in special channels. The functional feature of such a system lies in the prevention of condensate movement, which is ensured by the presence of a kind of filter system. Such filtering does not allow moisture to pass to the nodes and parts of the ventilation system, thereby prolonging its operational period.
Indicators of the speed of advancement of air through the ventilation ducts contribute to operational efficiency. For the system to work smoothly, air must circulate at a speed in excess of 2.5 m / s.
Such products are delivered to the market in various forms and differ in size, so it will not be difficult to choose the best option that matches the design features of ventilation.
The principle of operation of the ventilation droplet eliminator
A feature of the functioning of a multilayer porous filter lies in the system for trapping small drops, which as a result are combined into one more volumetric one. Passing through each layer of membranes, it becomes heavier, after which, treading through the last of the nets, it drips into the pallet under the action of gravity.
Different types of dropping devices differ structurally and functionally, but are characterized by approximately the same principle of operation. In some models of droplet eliminators for ventilation, it is necessary to periodically replace the container, making sure that it does not overflow with water. While others are additionally equipped with a special system with automatic drainage through the drainage layer.
Why drop catchers are so popular
The whole secret of such devices lies in their small advantages, which make droplet eliminators for ventilation leaders in sales. Among them:
- simplicity and ease of installation of structures, because the installation itself does not take much time;
- there is no need to order complex after-sales service, which such a system simply does not need;
- work efficiency can be easily improved by combining several filters into one whole;
- the use of this kind of removable design saves space.
What should not be forgotten during installation of the device
During installation, do not forget about several important rules that will contribute to a longer operation of the droplet eliminator for ventilation. The direct installation location is behind the duct cooler, and in the absence of it, behind the heat exchanger. The only correct position of the drip tray when the pan is bottom.
It is worth taking care that the device can be easily and easily reached if it is necessary to replace the filter or carry out repair work.
Please note that the device connection scheme involves the use of a special adapter that resembles a rectangle in shape. Please note that absolutely all connections must be hermetically sealed.
The modern market is crowded with products corresponding to different parameters, but at the same time, a droplet eliminator for ventilation can be made to order with non-standard dimensions or design.
What is the Arctic drip tray for ventilation?
In a set of standard delivery:
- One unit of device
- tank / tray for collecting moisture;
- set of replaceable filters;
- drainage system for drainage (optional).
For the manufacture of the case stainless steel is used, in most cases it is galvanized steel. On the inside, the surface of the product is covered with a special coating that enhances anti-corrosion properties. All seams and joints undergo special argon treatment in an inert gas environment. Inside the sealed enclosure of a round droplet eliminator for ventilation with a system of seals, coalescer filters are hidden that trap and attract droplets of moisture from the circulating air stream.
Such a device is very reliable and convenient to use, therefore, equipping it with a hood, you will forget about the problems that arise during the operation of the system. The only thing I would like to emphasize is to choose only high-quality certified products from manufacturers who are not afraid to trust.