Aerator for water is a small device, presented in the form of a strainer.
Need to use
This design must be fixed on the spout of the mixer, it is designed to mix the flow of water with air masses. This approach allows you to limit the flow rate, while for the consumer it will remain invisible. Many home masters dismantle the described device, believing that this device is an analog of a coarse filter. Even if a good water filter is installed in the house , you should not refuse to use an aerator, which is able to limit the passage of water. It is worth considering that, in addition to saving, using an aerator, it is possible to purify water from salts and sand particles.
Water Saver Functions
If you decide to purchase an aerator for water, then, first of all, you need to familiarize yourself with the main purpose of this design and its structure. Small holes are located around the perimeter of the device, through which air gets into the inside for mixing with water. As a result, water leaves the central part of the device, which is saturated with air bubbles. The main purpose of the aerator is the normalization of flow.
How to determine the correct operation of the device
In order to understand whether the aerator for water works correctly, you should pay attention to the stream, which should have a milky shade, be soft and foamed. After the jet hits the object, there is not a huge amount of spray that could scatter in different directions. The subject is under the stream. According to the housewives, it is very convenient for washing kitchen utensils and dishes. At the same time, a stream of water is sufficient to rid the surface of objects of dishwashing detergents. The aerator for water saturates the flow with oxygen, this contributes to the weathering of chlorine compounds. With the help of this device it is possible to improve the quality of water. Aeration helps to increase the volume of the jet due to air, thanks to the mixing of bubbles, but the pressure is unchanged, while water consumption is significantly reduced. Thus, without an aerator, the flow rate from the tap can reach 15 liters in one minute, the nozzle can reduce it by 2 times.
Additional benefits
The aerator for the mixer for saving water is very popular among consumers today. If we consider its additional advantages, then we can distinguish a lower noise level when using a water tap, since water mixed with air does not make noise. In the store, such a device can be purchased at an affordable cost, which can vary from 2 to 10 dollars. Each user will be able to make not only the installation, but also the dismantling of the device, this also applies to maintenance, which is simple. The main advantage is the possibility of saving water, which is important for modern owners of meters.
For reference
The nozzle-aerator of water has one drawback, which is expressed in the fragility of the device. Thus, after the acquisition, the device requires replacement once a year, if the water supply system is based on old pipes, then the purchase of a new device will have to be done once every six months. It is important to remember that the aerator not only creates a highly efficient jet, but also helps to reduce consumption, increasing the quality of water. This indicates that the consumer will be interested not to remove the device, but to monitor the proper operation of the device. Thus, maintenance will require periodic cleaning and filter replacement.
Aerator device
If you decide to install a water economizer - an aerator, then you should first familiarize yourself with its device. The design includes a housing, silicone or rubber gasket, as well as a module with a filter system, which is made of plastic. Grids with cells are stacked one on top of another in a cylindrical module. The first and second nets are designed to direct the stream of water, carrying out cleaning, as for the rest, they are necessary for mixing air into the water.
Aerator Material
Before purchasing a water aerator on a tap, it is recommended that you familiarize yourself with the material that can form the basis of the structure. If it comes to metal, then you can count on the most inexpensive devices. For this reason, they are the most popular. The disadvantage is the rapid destruction of the product from the effects of impurities and water. Among other things, the device will undergo corrosion during operation, and you may encounter the formation of rust, which sometimes even leads to the formation of holes. The device can be based on polymer material, in the role of its advantages can be distinguished excellent quality and affordable cost. The material is excellently exposed to the destructive effects of water. On sale you can find products of different designs, which can be tunnel and the simplest, presented in the form of dividers. The aerator on the tap to save water can be made of non-ferrous metals like bronze or brass, as well as ceramics. Such devices are the most expensive, but you can count on high quality and long life.
Varieties of modern water savers
Having visited the store, you can see aerators in a large assortment, modern ones differ in very original design features and have unique functions. If we are talking about vacuum devices, then they work on the principle of water compression using a vacuum valve. At the same time, high pressure acts on the flow, and this is precisely how aeration is ensured. Ultimately, the user gets a powerful jet at the exit, as well as a small water consumption, which can be as little as 1, 1 liter in one minute. Quite often, recently, modern consumers have installed aerators for water on mixers; they can be rotary or adjustable. With the help of such a device, you will have the opportunity to change the flow strength using one of two modes, namely a spray or a stream.
If you want to diversify the interior of the kitchen, you can choose a backlit aerator that will color the stream depending on the temperature in different shades. Thus, if the temperature does not reach 29 degrees, the color of the water will be green, if the temperature rises to 30-38 degrees, then the water will be painted blue. The flow will be red if the temperature rises above 39 degrees. It is important to consider that such devices with backlighting do not at all imply the need to use electric power sources, since they work due to the rotation of their turbine. You need to connect the device to the crane, installing it as a normal economizer, while the use of additional tools is not required, you will need to screw the device manually. It is possible not only to highlight the flow, but also to maintain a certain temperature. For this, a mixer with a thermostat is used.
Service Recommendations
Aerators for water, the reviews of which are the most positive, will perform its functions efficiently if it is technically sound. Under the influence of water, the nets are covered with elements of salts, iron oxide and other particles. Ultimately, this leads to the fact that the device ceases to function properly. If this happens, you will see that the pressure of the water will be weak, the hissing sound of the stream will disappear.
To clean the aerator, you need to dismantle it using a metal wrench or pliers. On the head of the device there are two faces that are located opposite. The aerator must be grabbed with a key over the edge by turning clockwise. Sometimes it turns out to remove the aerator manually, but if you have not done the processing for a long time, then this can be difficult. The rubber gasket must be removed and its condition evaluated. The removed filters must be cleaned with a needle or thin awl. If indelible deposits have formed on parts and holes, a chemical cleaning method can be used. It is in many cases the only true one.