Is it worth it to take a laser MFP with cheap consumables? Which printer to choose? Answering these questions, it should be noted that consumables in stores are expensive. If you choose between a printer and an MFP, it must be said that the first option is definitely more profitable from an economic point of view. However, MFPs also have advantages. Choosing a laser printer with cheap consumables is not an easy task.
In this case, it is necessary to take into account the parameters of the model. The cost of goods also plays an important role. Experts advise when choosing to pay attention to the components. In particular, we are talking about the drum, the strength of the shaft and the type of separator. If we talk about the important parameters of the model, it should be noted the maximum print resolution. In addition, you need to pay attention to the paper size and print speed. On average, there is a good printer in our time about 13 thousand rubles.
Features Hewlett Packard M452
This laser MFP with cheap consumables features has the following: resolution is 500 by 400 pixels, paper density is allowed at 60 g per square. meter. In this case, one cartridge costs about 700 rubles in the store for this model. Enough to print 2,000 pages on a printer. If we talk about the design features of the model, the paper pick rollers in the device are used with a small diameter.
In this case, the braking pad is made entirely of rubber. For cards, the specified laser MFP with cheap consumables fits well. If you believe the opinion of buyers, the first page starts up pretty quickly. The presented model is capable of working with the A5 format. On the market, this MFP user can buy for about 33,200 rubles.
Advantages of the Hewlett Packard M252 model
This color laser printer with cheap consumables is able to boast of a high-quality image transfer unit. The resolution parameter of the model is 500 by 600 dpi. The specified device is capable of working with A4 format. If necessary, print envelopes on the printer is allowed. For glossy paper, a density setting of 200 g per square meter is allowed. meter.
The print speed of the model is not bad. The separator in the device is located above the pickup roller. If you believe the opinion of buyers, the photo cylinder in the printer provides for high-quality. Cartridges for the model in the store cost about 850 rubles. At the same time, the price of the printer fluctuates around 14500 rubles.
What is the interest of the Hewlett Packard K1025 printer?
The specified color laser printer with cheap consumables is interesting for its multifunctionality. The tray in this case is included in the model kit roomy. You can pick up a cartridge for a device on the market for 700 rubles. Enough for him to calmly print 2 thousand pages. This printer has a plastic separator. If you believe customer reviews, you can change the cartridge yourself.
The clamps of the model are plastic, but it is rather difficult to break them. The magnetic shaft in the device is located on special latches. High printing speed is achieved by a high-quality transfer unit. The resolution parameter of the model is 600 by 600 dpi. The warm-up time of the device takes no more than 20 seconds. The first page prints on average in 6 seconds. This laser printer with cheap consumables for the home costs about 13,400 rubles.
Xerox 6500 N Reviews
This laser MFP with cheap consumables (photo shown below) is well suited for printing images on A4 paper. The resolution of this model is 500 by 400 dpi. In this case, the pressure device is installed high-quality. The drum is available with special thermal film. The model’s cartridge is located next to the photo cylinder. The separator is used plastic.
There is a cartridge for this model no more than 900 rubles. If we talk about the general parameters, then the warm-up time of the photo cylinder is 26 seconds. The first page goes to the tray in just 7 seconds. In a minute, the MFP can handle a maximum of no more than 30 pages. Mirrors of this model have a rotary type. High print resolution is achieved thanks to a high-quality lens group. Paper misfeeds are rare. The precharge shaft in this MFP is provided by the manufacturer. Separately, a high-quality transfer unit should be noted. It is worth the MFP presented in the store about 32 thousand rubles.
Parameters of the Xerox 6700 N
This color laser printer (A3) with cheap consumables differs from other models from a high-quality photo cylinder. His tray is designed for 200 sheets. You can find cartridges in the store for only 750 rubles. Enough of this calmly for printing about 2 thousand sheets. Speaking about the general parameters of the printer, it is important to note that the resolution is 600 by 600 dpi. The warm-up time of the device does not exceed 20 seconds, which pleases many buyers. In this case, plain paper skips in just 5 seconds.
Paper weight is allowed at 150 g per square meter. meter. In addition, it is important to note the compact size of the model. The transfer unit is located in this case near the separator. A high print speed is achieved with a photo cylinder. Also, print quality is influenced by an element such as a semiconductor laser. The model drum is used with thermal film. In this case, the clamping shaft is equipped with a special separator. Thus, the paper under the magnetic shaft is rarely curled.
It is very easy to change the cartridge yourself. In this case, the locks are provided under it reliable. However, it is important not to damage the group of forming lenses when installing the cartridge. In the end, it should be noted that there is a model on the market of approximately 12300 rubles.
Xerox 6900 N Model Overview
The specified laser printer with cheap consumables in management is quite simple. RAM model has 512 MB. Paper weight maximum allowed 220 g per square. meter. The first page prints in about 7 seconds. At the same time, up to 30 pages can pass in a minute. For postcards, this printer fits well. Cartridges for it can be purchased at 800 rubles. If we talk about design features, it is important to note the high-quality drum, which is equipped with thermal film.
The clamping shaft of the model is switched on without a distributor. If you believe the opinion of buyers, the paper is jammed under the sheep is very rare. However, it must be cleaned periodically. Cartridges for this model are mounted on latches. This printer has a precharge shaft. If necessary, the photo cylinder can be removed independently. Transfer rollers are very rarely erased. All major device operating systems are supported. You can purchase the specified printer for 12,200 rubles.
Differences of the device Brother H3170
This laser printer with cheap consumables is most suitable for printing on glossy paper. Its maximum density can be 210 g per square. meter. The first page on this printer prints in just 8 seconds. The resolution of this model is 600 by 600 dpi. The drum in the device is used with a clamping shaft. If you believe the reviews of experts, the paper separator in the printer is installed reliable.
The magnetic shaft in the device is located next to the braking pad. Cartridges must be installed directly on special clips. The separator of the model is standardly equipped with a plastic one. Cartridges for the printer can be found in the store at a price of 600 rubles. Enough of them to print 3 thousand pages. Directly, the model is sold on the market at a price of 13 thousand rubles.
Features of the device Brother H8250
The specified laser printer with cheap consumables is today considered to be very popular. However, it should be noted that there is no paper separator in it. In this case, the clamping shaft of the model is mounted with pick rollers. In this case, the semiconductor laser is located under the drum. If you believe the opinion of buyers, then paper can sometimes get stuck in a braking area.
Systemic failures in this case are extremely rare. Operating systems model supports a variety of. The resolution setting for the device is 500 x 400 dpi. The model can work only with A4 format. On the market, cartridges for it are sold at a price of 800 rubles. If you believe the opinion of buyers, then this is enough for a long time. This laser printer with cheap consumables costs about 14 thousand rubles.
Review "Samsung S430"
The printer of this series prints documents quite quickly. At the same time, he also copes with high-resolution images normally. However, it should be borne in mind that the specified equipment is very difficult to configure. In this case, there is no compatibility with Linux. If we talk about general parameters, then the model’s warm-up time takes no more than 30 seconds. The device can print the first page in only 9 seconds. The printer consumes electricity within reasonable limits.
Many are also pleased that the model’s drum is installed with thermal film. Mirrors in this case are of rotational type. The transfer unit itself consists of a shaft as well as a photo cylinder. Cartridges for the model in the store can be found for 720 rubles. In this case, the printer will cost about 15 thousand rubles.
Description of the Samsung S410 model
This printer is valued by many customers for its reliable magnetic shaft. The powder settles on it in very small quantities. It is often not required to clean it. If we talk about the parameters, then the warm-up time of the cylinder takes an average of 25 seconds. The model prints the first page for a long time. However, in a minute the device produces an average of 33 pages. The model tray is not very roomy. An important advantage of the printer can be called compact. The transfer node of the model is set to high-quality. In this case, the clamping shaft is equipped with a paper separator. Thus, sticking of sheets occurs very rarely.
Also, according to the opinion of customers, the photo cylinder in the device overheats extremely rarely. As a result, this printer allows you to print documents for a long time. Cartridges for the model can be selected for just 500 rubles. However, according to the owners of the device, they are missing for a short time. If we talk about documents, then 2 thousand sheets can be printed. Today the indicated printer costs around 12 thousand rubles.
Characteristics "Samsung SR365"
The specified printer is capable of printing on high density glossy paper. Also, the difference of this model lies in the high resolution setting. The paper size for it is suitable only for A4. In this case, cartridges for the model can be purchased for 730 rubles.
If you believe the opinion of the owners, then grab them for a long time. Speaking about design features, it is important to note the presence of a braking pad. The pick-up rollers of the device are provided quite wide. The laser model has a semiconductor type. The printer is ready for about 20 seconds. On the market, this model the user is able to purchase for 14,600 rubles.